playback speed triggered by audio volume. similar to https://github.com/zenyd/mpv-scripts/blob/master/speed-transition.lua

speed-transition-Audio.lua

local sense=-20
local speed = mp.get_property("speed")
local detect = false
function f(msg)
	if string.find(msg.text, "silence_end") and detect then
		mp.set_property("speed",speed)
		endmsg=msg.text
		detect = false
		--print("end")
	elseif string.find(msg.text, "silence_start") and detect==false then
		speed = mp.get_property("speed")
		mp.set_property("speed",5)
		startmsg=msg.text
		detect = true
		--print("start")
	end
end

function sensitivity(change)
	sense = sense + change
	mp.osd_message("detection sensitivity: "..sense.."dB")
	if string.find(mp.get_property("af"), "silencedetect") then
		mp.set_property("af", "lavfi=[silencedetect=n="..sense.."dB:d=1]")
	end
end

function toggle()
	mp.command("af toggle lavfi=[silencedetect=n="..sense.."dB:d=1]")
	if string.find(mp.get_property("af"), "silencedetect") then
		mp.osd_message("Silence detection enabled")
		mp.register_event("log-message", f)
	else
		mp.set_property("speed",speed)
		mp.osd_message("Silence detection disabled")
		mp.unregister_event(f)
	end
end

function det(msg)
	if string.find(msg.text, "max_volume") then
		mp.osd_message(msg.text)
	end
end
local timer
function voldetect()
	if timer~=nil and timer:is_enabled() then
		timer:kill()
		mp.unregister_event(det)
	else
		mp.register_event("log-message", det)
		timer = mp.add_periodic_timer(0.1, function()
			mp.command("no-osd af toggle lavfi=[volumedetect]")
			mp.add_timeout(0.09, function()
				mp.command("no-osd af toggle lavfi=[volumedetect]")
			end)
		end)
	end
end

mp.enable_messages("v")
mp.add_key_binding("F2", "toggle", toggle)
mp.add_key_binding("alt+F2", "voldetect", voldetect)
mp.add_key_binding("shift+F2", "sense-up", function() sensitivity(1) end, "repeatable")
mp.add_key_binding("ctrl+F2", "sense-down", function() sensitivity(-1) end, "repeatable")

@Topping1 You need to use three ticks in order to show whitespace.

like
this

thanks!

I've reworked this into a highly configurable script. I've published it here: https://github.com/ferreum/mpv-skipsilence
The main issue is that audio-video is still desynced very easily. Using less aggressive speed ramps and a slower update interval helps, but it's never perfect. I added a workaround for that (check the doc at the top of the script). But if you're only listening to the audio, this is not a problem.

Thanks for publishing this, it was a very good starting point.

Good job! My hope with this, although not that useful personally, was always that it would inspire someone who really cared about it to take it to a point that they thought was useful.