bjcubsfan · February 17, 2021 22:51 · l15k4 · Feb 17, 2021 · bjcubsfan · Feb 17, 2021
diff --git a/arch.conf b/arch.conf
 title    Arch Linux
 linux    /vmlinuz-linux
 initrd   /intel-ucode.img
 initrd   /initramfs-linux.img
 options  nvme_load=YES root=UUID=e535f1e1-13d7-45e2-b0c6-d9c3c186448c rw
diff --git a/install_log.md b/install_log.md
diff --git a/mkinitcpio.conf b/mkinitcpio.conf
 # vim:set ft=sh
 # MODULES
 # The following modules are loaded before any boot hooks are
 # run.  Advanced users may wish to specify all system modules
 # in this array.  For instance:
 #     MODULES=(piix ide_disk reiserfs)
 MODULES=(vmd)

 # BINARIES
 # This setting includes any additional binaries a given user may
 # wish into the CPIO image.  This is run last, so it may be used to
 # override the actual binaries included by a given hook
 # BINARIES are dependency parsed, so you may safely ignore libraries
 BINARIES=()

 # FILES
 # This setting is similar to BINARIES above, however, files are added
 # as-is and are not parsed in any way.  This is useful for config files.
 FILES=()

 # HOOKS
 # This is the most important setting in this file.  The HOOKS control the
 # modules and scripts added to the image, and what happens at boot time.
 # Order is important, and it is recommended that you do not change the
 # order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
 # help on a given hook.
 # 'base' is _required_ unless you know precisely what you are doing.
 # 'udev' is _required_ in order to automatically load modules
 # 'filesystems' is _required_ unless you specify your fs modules in MODULES
 # Examples:
 ##   This setup specifies all modules in the MODULES setting above.
 ##   No raid, lvm2, or encrypted root is needed.
 #    HOOKS=(base)
 #
 ##   This setup will autodetect all modules for your system and should
 ##   work as a sane default
 #    HOOKS=(base udev autodetect block filesystems)
 #
 ##   This setup will generate a 'full' image which supports most systems.
 ##   No autodetection is done.
 #    HOOKS=(base udev block filesystems)
 #
 ##   This setup assembles a pata mdadm array with an encrypted root FS.
 ##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
 #    HOOKS=(base udev block mdadm encrypt filesystems)
 #
 ##   This setup loads an lvm2 volume group on a usb device.
 #    HOOKS=(base udev block lvm2 filesystems)
 #
 ##   NOTE: If you have /usr on a separate partition, you MUST include the
 #    usr, fsck and shutdown hooks.
 HOOKS=(base udev autodetect modconf block filesystems keyboard fsck)

 # COMPRESSION
 # Use this to compress the initramfs image. By default, gzip compression
 # is used. Use 'cat' to create an uncompressed image.
 #COMPRESSION="gzip"
 #COMPRESSION="bzip2"
 #COMPRESSION="lzma"
 #COMPRESSION="xz"
 #COMPRESSION="lzop"
 #COMPRESSION="lz4"

 # COMPRESSION_OPTIONS
 # Additional options for the compressor
 #COMPRESSION_OPTIONS=()
	title Arch Linux
	linux /vmlinuz-linux
	initrd /intel-ucode.img
	initrd /initramfs-linux.img
	options nvme_load=YES root=UUID=e535f1e1-13d7-45e2-b0c6-d9c3c186448c rw
	# vim:set ft=sh
	# MODULES
	# The following modules are loaded before any boot hooks are
	# run. Advanced users may wish to specify all system modules
	# in this array. For instance:
	# MODULES=(piix ide_disk reiserfs)
	MODULES=(vmd)

	# BINARIES
	# This setting includes any additional binaries a given user may
	# wish into the CPIO image. This is run last, so it may be used to
	# override the actual binaries included by a given hook
	# BINARIES are dependency parsed, so you may safely ignore libraries
	BINARIES=()

	# FILES
	# This setting is similar to BINARIES above, however, files are added
	# as-is and are not parsed in any way. This is useful for config files.
	FILES=()

	# HOOKS
	# This is the most important setting in this file. The HOOKS control the
	# modules and scripts added to the image, and what happens at boot time.
	# Order is important, and it is recommended that you do not change the
	# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
	# help on a given hook.
	# 'base' is _required_ unless you know precisely what you are doing.
	# 'udev' is _required_ in order to automatically load modules
	# 'filesystems' is _required_ unless you specify your fs modules in MODULES
	# Examples:
	## This setup specifies all modules in the MODULES setting above.
	## No raid, lvm2, or encrypted root is needed.
	# HOOKS=(base)
	#
	## This setup will autodetect all modules for your system and should
	## work as a sane default
	# HOOKS=(base udev autodetect block filesystems)
	#
	## This setup will generate a 'full' image which supports most systems.
	## No autodetection is done.
	# HOOKS=(base udev block filesystems)
	#
	## This setup assembles a pata mdadm array with an encrypted root FS.
	## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
	# HOOKS=(base udev block mdadm encrypt filesystems)
	#
	## This setup loads an lvm2 volume group on a usb device.
	# HOOKS=(base udev block lvm2 filesystems)
	#
	## NOTE: If you have /usr on a separate partition, you MUST include the
	# usr, fsck and shutdown hooks.
	HOOKS=(base udev autodetect modconf block filesystems keyboard fsck)

	# COMPRESSION
	# Use this to compress the initramfs image. By default, gzip compression
	# is used. Use 'cat' to create an uncompressed image.
	#COMPRESSION="gzip"
	#COMPRESSION="bzip2"
	#COMPRESSION="lzma"
	#COMPRESSION="xz"
	#COMPRESSION="lzop"
	#COMPRESSION="lz4"

	# COMPRESSION_OPTIONS
	# Additional options for the compressor
	#COMPRESSION_OPTIONS=()