| module Authentication | |
| class API | |
| # Some methods we use are on the "instance" which Rodauth doesn't (yet) consider part of its API. We'll hardcode the | |
| # ones we want to let through here so we are conscious which parts of the private API we are exposing. | |
| @@delegated_instance_methods = [ | |
| :otp_interval, | |
| :otp_exists?, | |
| :account_webauthn_usage, | |
| :set_password, | |
| :clear_other_sessions, |
| automation: | |
| - id: dbd6c805-f5cf-4c8b-9224-6163a460d620 | |
| alias: Inverter - battery maintenance # full cycle discharge and re-charge | |
| trigger: | |
| # TODO trigger when the battery charge/discharge today registers are below some threshold (however these registers | |
| # aren't resetting the way they should currently) | |
| # In meantime, we'll just do this at the once per month | |
| - platform: time | |
| at: "01:00:00" # 1 am |
Of note:
result_code is 1 for success, varying other values for different types of errorsresult_msg is a usually "success", but contains more detail for certain errors. In at least one observed error
response, the key was missing entirely.
| inverter: | |
| host: REPLACEME # [Required] IP Address of the Inverter or Dongle | |
| scan_interval: 1 # [Optional] Default is 30 | |
| connection: http # [Required] options: modbus, sungrow, http | |
| model: "SH5.0RS" # [Optional] This is autodetected on startup, only needed if detection issues or for testing | |
| log_console: ERROR # [Optional] Default is WARNING, Options: DEBUG, INFO, WARNING, ERROR | |
| level: 0 # [Optional] Set the amount of information to gather | |
| # 0 = Model and Solar Generation, | |
| # 1 (default) = Useful data, all required for exports, | |
| # 2 everything your Inverter supports, |
| [[inputs.modbus]] | |
| name = "Sungrow inverter" | |
| controller = "tcp://$SUNGROW_IP:502" | |
| slave_id = 1 | |
| timeout = "1s" | |
| ## Define the configuration schema | |
| ## |---register -- define fields per register type in the original style (only supports one slave ID) | |
| ## |---request -- define fields on a requests base |
Not yet sure if this is working, but roughly ports built-in Net::HTTP tracing from Sentry to an Excon middleware.
| esphome: | |
| name: ph-260bd-relay | |
| platform: ESP32 | |
| board: esp32dev | |
| # Enable logging | |
| logger: | |
| logs: | |
| esp32_ble_tracker: INFO |
| require 'rodauth' | |
| module Rodauth | |
| # Clean up how we configure all of our tables, columns, etc., to use values which are more consistent with Rails than | |
| # the defaults as well as use Rails mailers | |
| Feature.define(:rails_conventions, :RailsConventions) do | |
| depends :rails # rodauth-rails feature | |
| def post_configure | |
| # Rodauth uses dash-separated paths by default, so we'll make these underscores by default |
| # frozen_string_literal: true | |
| require 'rodauth' | |
| # In order for Rails to reload this constant in dev, we need `require_dependency` because Rodauth expects the features | |
| # in a specific load path, but it defines a constant against Rails' expectations, which breaks reloading. | |
| require_dependency 'rodauth/features/remote_ip' | |
| module Rodauth | |
| Feature.define(:migrate_from_devise, :MigrateFromDevise) do |
| # frozen_string_literal: true | |
| module Authentication | |
| # Rodauth is pretty coupled to being in a request context, but this will provide the minimum necessary to be able | |
| # to generate correct URLs | |
| def self.rodauth(configuration_name = :user, params: {}) | |
| url_options = Rails.application.config.action_mailer.default_url_options | |
| host = url_options[:host] | |
| host += ":#{url_options[:port]}" if url_options.key?(:port) | |
| base_url = "#{url_options[:protocol] || 'http'}://#{host}" |