Created
August 31, 2018 05:02
-
-
Save bluet/095d28db48a4f0cf3e4684fbf6f08ef6 to your computer and use it in GitHub Desktop.
Created using remix-ide: Realtime Ethereum Contract Compiler and Runtime. Load this file by pasting this gists URL or ID at https://remix.ethereum.org/#version=soljson-v0.4.24+commit.e67f0147.js&optimize=true&gist=
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
pragma solidity ^0.4.16; | |
library SafeMath { | |
/** | |
* @dev Multiplies two numbers, reverts on overflow. | |
*/ | |
function mul(uint256 _a, uint256 _b) internal pure returns (uint256) { | |
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the | |
// benefit is lost if 'b' is also tested. | |
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522 | |
if (_a == 0) { | |
return 0; | |
} | |
uint256 c = _a * _b; | |
require(c / _a == _b); | |
return c; | |
} | |
/** | |
* @dev Integer division of two numbers truncating the quotient, reverts on division by zero. | |
*/ | |
function div(uint256 _a, uint256 _b) internal pure returns (uint256) { | |
require(_b > 0); // Solidity only automatically asserts when dividing by 0 | |
uint256 c = _a / _b; | |
// assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold | |
return c; | |
} | |
/** | |
* @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend). | |
*/ | |
function sub(uint256 _a, uint256 _b) internal pure returns (uint256) { | |
require(_b <= _a); | |
uint256 c = _a - _b; | |
return c; | |
} | |
/** | |
* @dev Adds two numbers, reverts on overflow. | |
*/ | |
function add(uint256 _a, uint256 _b) internal pure returns (uint256) { | |
uint256 c = _a + _b; | |
require(c >= _a); | |
return c; | |
} | |
/** | |
* @dev Divides two numbers and returns the remainder (unsigned integer modulo), | |
* reverts when dividing by zero. | |
*/ | |
function mod(uint256 a, uint256 b) internal pure returns (uint256) { | |
require(b != 0); | |
return a % b; | |
} | |
} | |
contract owned { | |
using SafeMath for uint256; | |
address public owner; | |
constructor() public { | |
owner = msg.sender; | |
} | |
modifier onlyOwner { | |
require(msg.sender == owner); | |
_; | |
} | |
function transferOwnership(address newOwner) onlyOwner public { | |
owner = newOwner; | |
} | |
} | |
interface tokenRecipient { | |
using SafeMath for uint256; | |
function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; | |
} | |
contract TokenERC20 { | |
using SafeMath for uint256; | |
// Public variables of the token | |
string public name; | |
string public symbol; | |
uint8 public decimals = 18; | |
// 18 decimals is the strongly suggested default, avoid changing it | |
uint256 public totalSupply; | |
// This creates an array with all balances | |
mapping (address => uint256) public balanceOf; | |
mapping (address => mapping (address => uint256)) public allowance; | |
// This generates a public event on the blockchain that will notify clients | |
event Transfer(address indexed from, address indexed to, uint256 value); | |
// This generates a public event on the blockchain that will notify clients | |
event Approval(address indexed _owner, address indexed _spender, uint256 _value); | |
// This notifies clients about the amount burnt | |
event Burn(address indexed from, uint256 value); | |
/** | |
* Constructor function | |
* | |
* Initializes contract with initial supply tokens to the creator of the contract | |
*/ | |
constructor( | |
uint256 initialSupply, | |
string tokenName, | |
string tokenSymbol | |
) public { | |
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount | |
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens | |
name = tokenName; // Set the name for display purposes | |
symbol = tokenSymbol; // Set the symbol for display purposes | |
} | |
/** | |
* Internal transfer, only can be called by this contract | |
*/ | |
function _transfer(address _from, address _to, uint _value) internal { | |
// Prevent transfer to 0x0 address. Use burn() instead | |
require(_to != 0x0); | |
// Check if the sender has enough | |
require(balanceOf[_from] >= _value); | |
// Check for overflows | |
require(balanceOf[_to] + _value > balanceOf[_to]); | |
// Save this for an assertion in the future | |
uint previousBalances = balanceOf[_from] + balanceOf[_to]; | |
// Subtract from the sender | |
balanceOf[_from] -= _value; | |
// Add the same to the recipient | |
balanceOf[_to] += _value; | |
emit Transfer(_from, _to, _value); | |
// Asserts are used to use static analysis to find bugs in your code. They should never fail | |
assert(balanceOf[_from] + balanceOf[_to] == previousBalances); | |
} | |
/** | |
* Transfer tokens | |
* | |
* Send `_value` tokens to `_to` from your account | |
* | |
* @param _to The address of the recipient | |
* @param _value the amount to send | |
*/ | |
function transfer(address _to, uint256 _value) public returns (bool success) { | |
_transfer(msg.sender, _to, _value); | |
return true; | |
} | |
/** | |
* Transfer tokens from other address | |
* | |
* Send `_value` tokens to `_to` in behalf of `_from` | |
* | |
* @param _from The address of the sender | |
* @param _to The address of the recipient | |
* @param _value the amount to send | |
*/ | |
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) { | |
// require(_to != address(0)); | |
require(_value <= allowance[_from][msg.sender]); // Check allowance | |
// allowance[_from][msg.sender] -= _value; | |
allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value); | |
_transfer(_from, _to, _value); | |
return true; | |
} | |
// function transferFrom( | |
// address _from, | |
// address _to, | |
// uint256 _value | |
// ) | |
// public | |
// returns (bool) | |
// { | |
// require(_value <= balances_[_from]); | |
// require(_value <= allowance[_from][msg.sender]); | |
// require(_to != address(0)); | |
// balances_[_from] = balances_[_from].sub(_value); | |
// balances_[_to] = balances_[_to].add(_value); | |
// allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value); | |
// emit Transfer(_from, _to, _value); | |
// return true; | |
// } | |
/** | |
* Set allowance for other address | |
* | |
* Allows `_spender` to spend no more than `_value` tokens in your behalf | |
* | |
* @param _spender The address authorized to spend | |
* @param _value the max amount they can spend | |
*/ | |
function approve(address _spender, uint256 _value) public returns (bool success) { | |
allowance[msg.sender][_spender] = _value; | |
emit Approval(msg.sender, _spender, _value); | |
return true; | |
} | |
/** | |
* Set allowance for other address and notify | |
* | |
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it | |
* | |
* @param _spender The address authorized to spend | |
* @param _value the max amount they can spend | |
* @param _extraData some extra information to send to the approved contract | |
*/ | |
function approveAndCall(address _spender, uint256 _value, bytes _extraData) public returns (bool success) { | |
tokenRecipient spender = tokenRecipient(_spender); | |
if (approve(_spender, _value)) { | |
spender.receiveApproval(msg.sender, _value, this, _extraData); | |
return true; | |
} | |
} | |
/** | |
* Destroy tokens | |
* | |
* Remove `_value` tokens from the system irreversibly | |
* | |
* @param _value the amount of money to burn | |
*/ | |
function burn(uint256 _value) public returns (bool success) { | |
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough | |
balanceOf[msg.sender] -= _value; // Subtract from the sender | |
totalSupply -= _value; // Updates totalSupply | |
emit Burn(msg.sender, _value); | |
return true; | |
} | |
/** | |
* Destroy tokens from other account | |
* | |
* Remove `_value` tokens from the system irreversibly on behalf of `_from`. | |
* | |
* @param _from the address of the sender | |
* @param _value the amount of money to burn | |
*/ | |
function burnFrom(address _from, uint256 _value) public returns (bool success) { | |
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough | |
require(_value <= allowance[_from][msg.sender]); // Check allowance | |
balanceOf[_from] -= _value; // Subtract from the targeted balance | |
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance | |
totalSupply -= _value; // Update totalSupply | |
emit Burn(_from, _value); | |
return true; | |
} | |
} | |
/******************************************/ | |
/* ADVANCED TOKEN STARTS HERE */ | |
/******************************************/ | |
contract MyAdvancedToken is owned, TokenERC20 { | |
using SafeMath for uint256; | |
uint256 public sellPrice; | |
uint256 public buyPrice; | |
mapping (address => bool) public frozenAccount; | |
/* This generates a public event on the blockchain that will notify clients */ | |
event FrozenFunds(address target, bool frozen); | |
/* Initializes contract with initial supply tokens to the creator of the contract */ | |
constructor( | |
uint256 initialSupply, | |
string tokenName, | |
string tokenSymbol | |
) TokenERC20(initialSupply, tokenName, tokenSymbol) public {} | |
/* Internal transfer, only can be called by this contract */ | |
function _transfer(address _from, address _to, uint _value) internal { | |
require (_to != 0x0); // Prevent transfer to 0x0 address. Use burn() instead | |
require (balanceOf[_from] >= _value); // Check if the sender has enough | |
require (balanceOf[_to] + _value >= balanceOf[_to]); // Check for overflows | |
require(!frozenAccount[_from]); // Check if sender is frozen | |
require(!frozenAccount[_to]); // Check if recipient is frozen | |
// balanceOf[_from] -= _value; // Subtract from the sender | |
balanceOf[_from] = balanceOf[_from].sub(_value); | |
// balanceOf[_to] += _value; // Add the same to the recipient | |
balanceOf[_to] = balanceOf[_to].add(_value); | |
emit Transfer(_from, _to, _value); | |
} | |
// function transferFrom( | |
// address _from, | |
// address _to, | |
// uint256 _value | |
// ) | |
// public | |
// returns (bool) | |
// { | |
// require(_value <= balanceOf[_from]); | |
// require(_value <= allowance[_from][msg.sender]); | |
// require(_to != address(0)); | |
// balanceOf[_from] = balanceOf[_from].sub(_value); | |
// balanceOf[_to] = balanceOf[_to].add(_value); | |
// allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value); | |
// emit Transfer(_from, _to, _value); | |
// return true; | |
// } | |
/// @notice Create `mintedAmount` tokens and send it to `target` | |
/// @param target Address to receive the tokens | |
/// @param mintedAmount the amount of tokens it will receive | |
function mintToken(address target, uint256 mintedAmount) onlyOwner public { | |
balanceOf[target] += mintedAmount; | |
totalSupply += mintedAmount; | |
emit Transfer(0, this, mintedAmount); | |
emit Transfer(this, target, mintedAmount); | |
} | |
/// @notice `freeze? Prevent | Allow` `target` from sending & receiving tokens | |
/// @param target Address to be frozen | |
/// @param freeze either to freeze it or not | |
function freezeAccount(address target, bool freeze) onlyOwner public { | |
frozenAccount[target] = freeze; | |
emit FrozenFunds(target, freeze); | |
} | |
/// @notice Allow users to buy tokens for `newBuyPrice` eth and sell tokens for `newSellPrice` eth | |
/// @param newSellPrice Price the users can sell to the contract | |
/// @param newBuyPrice Price users can buy from the contract | |
function setPrices(uint256 newSellPrice, uint256 newBuyPrice) onlyOwner public { | |
sellPrice = newSellPrice; | |
buyPrice = newBuyPrice; | |
} | |
/// @notice Buy tokens from contract by sending ether | |
function buy() payable public { | |
uint amount = msg.value / buyPrice; // calculates the amount | |
_transfer(this, msg.sender, amount); // makes the transfers | |
} | |
/// @notice Sell `amount` tokens to contract | |
/// @param amount amount of tokens to be sold | |
function sell(uint256 amount) public { | |
address myAddress = this; | |
require(myAddress.balance >= amount * sellPrice); // checks if the contract has enough ether to buy | |
_transfer(msg.sender, this, amount); // makes the transfers | |
msg.sender.transfer(amount * sellPrice); // sends ether to the seller. It's important to do this last to avoid recursion attacks | |
} | |
} | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment