Skip to content

Instantly share code, notes, and snippets.

@bonnieking

bonnieking/gist:b4533386da4f28322f33

Created December 12, 2015 05:14
Show Gist options
  • Save bonnieking/b4533386da4f28322f33 to your computer and use it in GitHub Desktop.
Save bonnieking/b4533386da4f28322f33 to your computer and use it in GitHub Desktop.
Download ZIP
outernet
Raw
gistfile1.txt
Welcome to minicom 2.7
OPTIONS: I18n
Compiled on Aug 17 2014, 17:46:40.
Port /dev/ttyUSB0, 23:10:00
Press CTRL-A Z for help on special keys
Password:
Login incorrect
outernet login: outernet
Password:
Login incorrect
outernet login: lighthouse
Password:
Login incorrect
Welcome to Buildroot
outernet login: root
Password:
Login incorrect
outernet login: outernet
Password:
Login timed out after 60 seconds
Welcome to Buildroot
outernet login: outernet
Password:
outernet@outernet:~$ uname -a
Linux outernet 3.10.61 #2 SMP PREEMPT Thu Aug 20 17:13:04 CEST 2015 armv7l GNU/Linux
outernet@outernet:~$ dmesg
[ 0.000000@0] Booting Linux on physical CPU 0x200
[ 0.000000@0] Linux version 3.10.61 (ubuntu@ubuntu) (gcc version 4.7.4 (crosstool-NG 1.20.0) ) #2 SMP P5
[ 0.000000@0] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000@0] Machine: Amlogic Meson6, model: AMLOGIC
[ 0.000000@0] physical memory start address is 0x80000000
[ 0.000000@0] reserved_end is 8e4fffff
[ 0.000000@0] reserved 511M-512M 1M memory for firmware
[ 0.000000@0] Total memory is 1024 MiB
[ 0.000000@0] Reserved low memory from 0x85000000 to 0x8e4fffff, size: 149 MiB
[ 0.000000@0] ion_dev0(low) : 0x85100000 - 0x87100000 ( 32 MiB)
[ 0.000000@0] mesonfb0(low) : 0x87100000 - 0x88100000 ( 16 MiB)
[ 0.000000@0] mesonfb1(low) : 0x88100000 - 0x88200000 ( 1 MiB)
[ 0.000000@0] deinterlace0(low) : 0x88200000 - 0x89e00000 ( 28 MiB)
[ 0.000000@0] mesonstream0(low) : 0x89e00000 - 0x8a800000 ( 10 MiB)
[ 0.000000@0] vdec0(low) : 0x8a800000 - 0x8c800000 ( 32 MiB)
[ 0.000000@0] ppmgr0(low) : 0x8c800000 - 0x8db00000 ( 19 MiB)
[ 0.000000@0] amvideocap0(low) : 0x8db00000 - 0x8e500000 ( 10 MiB)
[ 0.000000@0] Ignore bootargs 'mem' param.
[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000@0] On node 0 totalpages: 223744
[ 0.000000@0] free_area_init_node: node 0, pgdat c081ec40, node_mem_map c08aa000
[ 0.000000@0] Normal zone: 1504 pages used for memmap
[ 0.000000@0] Normal zone: 0 pages reserved
[ 0.000000@0] Normal zone: 154112 pages, LIFO batch:31
[ 0.000000@0] HighMem zone: 544 pages used for memmap
[ 0.000000@0] HighMem zone: 69632 pages, LIFO batch:15
[ 0.000000@0] Meson chip version = RevA (16:A - 0:D67)
[ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c10b8000 s7808 r8192 d12672 u32768
[ 0.000000@0] pcpu-alloc: s7808 r8192 d12672 u32768 alloc=8*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 222240
[ 0.000000@0] Kernel command line: console=ttyS0,115200n8 logo=osd1,0x84100000,720p,full androidboot.rea
[ 0.000000@0] osd1:1
[ 0.000000@0] 720p:11
[ 0.000000@0] full:2
[ 0.000000@0] kernel get hdmimode form uboot is 720p
[ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
[ 0.000000@0] ******** uboot setup mac-addr: e8:18:63:50:6d:e0
[ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000@0] Memory: 80MB 282MB 512MB = 874MB total
[ 0.000000@0] Memory: 876000k/876000k available, 18976k reserved, 278528K highmem
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000@0] vmalloc : 0xef800000 - 0xff000000 ( 248 MB)
[ 0.000000@0] lowmem : 0xc0000000 - 0xef000000 ( 752 MB)
[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000@0] .text : 0xc0008000 - 0xc079ea18 (7771 kB)
[ 0.000000@0] .init : 0xc079f000 - 0xc07c9e80 ( 172 kB)
[ 0.000000@0] .data : 0xc07ca000 - 0xc081f8e0 ( 343 kB)
[ 0.000000@0] .bss : 0xc081f8e0 - 0xc08a940c ( 551 kB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] RCU debugfs-based tracing is enabled.
[ 0.000000@0] NR_IRQS:256
[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000@0] Global timer: MESON TIMER-A (c07e3b40) initialized
[ 0.000000@0] Disable timerA
[ 0.000000@0] Console: colour dummy device 80x30
[ 0.000000@0] meson_serial_console_setup
[ 0.000000@0] console [ttyS0] enabled
[ 0.324590@0] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
[ 0.380057@0] pid_max: default: 32768 minimum: 301
[ 0.382245@0] Mount-cache hash table entries: 512
[ 0.387672@0] CPU: Testing write buffer coherency: ok
[ 0.392186@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[ 0.397595@0] Local timer: MESON TIMER-B (c07e3c40) for CPU0 initialized
[ 0.404326@0] Disable timerA
[ 0.407133@0] Disable timerB
[ 0.410001@0] Disable timerA
[ 0.413002@0] Setting up static identity map for 0xc0598408 - 0xc0598460
[ 0.419719@0] L310 cache controller enabled
[ 0.423711@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c8, Cache size: 524288 B
[ 0.431241@0] AUX_CTRL 0x3e460000, PERFETCH_CTRL 0x30000006, POWER_CTRL 0x00000000
[ 0.439339@0] TAG_LATENCY 0x00000222, DATA_LATENCY 0x00000222
[ 0.497988@1] CPU1: Booted secondary processor
[ 0.557625@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[ 0.557638@1] Local timer: MESON TIMER-D (c07e3e40) for CPU1 initialized
[ 0.557694@0] Brought up 2 CPUs
[ 0.557700@0] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
[ 0.557703@0] CPU: All CPU(s) started in SVC mode.
[ 0.558176@0] devtmpfs: initialized
[ 0.562728@0] clkrate [ xtal ] : 24000000
[ 0.562734@0] clkrate [ pll_sys ] : 1200000000
[ 0.562739@0] clkrate [ pll_fixed ] : 2000000000
[ 0.562743@0] clkrate [ pll_vid2 ] : 378000000
[ 0.562746@0] clkrate [ pll_hpll ] : 378000000
[ 0.562814@0] clkrate [ pll_ddr ] : 516000000
[ 0.562818@0] clkrate [ a9_clk ] : 1200000000
[ 0.562886@0] clkrate [ clk81 ] : 200000000
[ 0.563945@0] pinctrl core: initialized pinctrl subsystem
[ 0.564419@0] regulator-dummy: no parameters
[ 0.564751@0] NET: Registered protocol family 16
[ 0.582363@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.589099@0] amlogic_gpio gpio: Probed amlogic GPIO driver
[ 0.589769@0] register lm device lm-root
[ 0.589897@0] register lm device lm1
[ 0.590004@0] register lm device lm0
[ 0.590336@0] Init pinux probe!
[ 0.591163@0] pinmux-m6 pinmux: Probed amlogic pinctrl driver
[ 0.591359@0] -------early_init_dt_probe:38----------
[ 0.591545@0] -------early_init_dt_init:115----------
[ 0.591549@0] tv_init_module
[ 0.591562@0] major number 254 for disp
[ 0.591565@0] vout_register_server
[ 0.591567@0] register tv module server ok
[ 0.591678@0] aml_i2c version: 20140813
[ 0.591742@0] plat->state_name:default
[ 0.591761@0] master_no = 0, master_regs=f3100500
[ 0.591965@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ee8e48a8)
[ 0.591970@0] aml-i2c i2c-AO: aml i2c bus driver.
[ 0.592087@0] plat->state_name:default
[ 0.592097@0] master_no = 1, master_regs=f1108500
[ 0.592270@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ee8e4ca8)
[ 0.592274@0] aml-i2c i2c-A: aml i2c bus driver.
[ 0.592385@0] plat->state_name:default
[ 0.592395@0] master_no = 2, master_regs=f11087c0
[ 0.592548@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ee8e50a8)
[ 0.592552@0] aml-i2c i2c-B: aml i2c bus driver.
[ 0.592818@0] call aml_dvfs_init in
[ 0.592873@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
[ 0.592879@0] [DVFS]dvfs table of vcck_dvfs is:
[ 0.592883@0] [DVFS] freq, min_uV, max_uV
[ 0.592886@0] [DVFS] 200000, 1010000, 1010000
[ 0.592888@0] [DVFS] 600000, 1010000, 1010000
[ 0.592891@0] [DVFS] 792000, 1010000, 1010000
[ 0.592893@0] [DVFS] 816000, 1110000, 1110000
[ 0.592895@0] [DVFS] 840000, 1110000, 1110000
[ 0.592897@0] [DVFS] 984000, 1110000, 1110000
[ 0.592900@0] [DVFS] 1000000, 1110000, 1110000
[ 0.592902@0] [DVFS] 1080000, 1220000, 1220000
[ 0.592904@0] [DVFS] 1200000, 1240000, 1240000
[ 0.592906@0] [DVFS] 1320000, 1320000, 1320000
[ 0.592908@0] [DVFS] 1512000, 1320000, 1320000
[ 0.593123@0] hdmitx: system: amhdmitx_init
[ 0.593126@0] hdmitx: system: Ver: 2014May6
[ 0.593180@0] hdmitx: system: amhdmitx_probe
[ 0.593533@0] hdmitx: system: not find cec config
[ 0.593535@0] hdmitx: system: not find vend_init_data
[ 0.593561@0] amhdmitx is using the pin GPIOD_5
[ 0.593933@0] hdmitx: system: hw init
[ 0.593942@0] HDMI: get brd phy data
[ 0.593944@0] hdmi phy setting
[ 0.593992@0] HDMI: get brd phy data
[ 0.593994@0] hdmi phy setting
[ 0.594536@0] hdmitx: system: reset intr mask
[ 0.642299@0] bio: create slab <bio-0> at 0
[ 0.643401@0] SCSI subsystem initialized
[ 0.643931@0] usbcore: registered new interface driver usbfs
[ 0.644038@0] usbcore: registered new interface driver hub
[ 0.644176@0] usbcore: registered new device driver usb
[ 0.645185@0] TV mode 576cvbs selected.
[ 0.645189@0] [0x1b7e] = 0xff
[ 0.645191@0] [0x105f] = 0x0
[ 0.645193@0] [0x109c] = 0x2001042d
[ 0.645195@0] [0x109d] = 0x814d3928
[ 0.645197@0] [0x109e] = 0x6b425012
[ 0.645198@0] [0x109f] = 0x110
[ 0.645200@0] [0x109c] = 0x1042d
[ 0.645202@0] [0x1066] = 0x11943
[ 0.645204@0] [0x1059] = 0x100
[ 0.645205@0] [0x105f] = 0x80000
[ 0.645207@0] [0x105f] = 0x88001
[ 0.645209@0] [0x105f] = 0x80003
[ 0.645210@0] [0x104a] = 0x101
[ 0.645212@0] [0x1b54] = 0x12
[ 0.645213@0] [0x1c0a] = 0x12
[ 0.645215@0] [0x1b62] = 0x0
[ 0.645216@0] [0x1b00] = 0x0
[ 0.645218@0] [0x1b01] = 0x0
[ 0.645219@0] [0x1b0a] = 0x3
[ 0.645221@0] [0x1b0b] = 0x81
[ 0.645223@0] [0x1b0e] = 0x3
[ 0.645224@0] [0x1b0f] = 0x104
[ 0.645226@0] [0x1b50] = 0x8107
[ 0.645228@0] [0x1b68] = 0xff
[ 0.645230@0] [0x1b00] = 0x13
[ 0.645231@0] [0x1b01] = 0x26
[ 0.645233@0] [0x1b07] = 0x28
[ 0.645234@0] [0x1b08] = 0x7
[ 0.645236@0] [0x1b56] = 0x333
[ 0.645238@0] [0x1c19] = 0xfb
[ 0.645239@0] [0x1c1a] = 0x69b
[ 0.645241@0] [0x1c1b] = 0x16
[ 0.645242@0] [0x1c1c] = 0x136
[ 0.645244@0] [0x1c1d] = 0x17
[ 0.645246@0] [0x1c1e] = 0x137
[ 0.645247@0] [0x1b60] = 0x0
[ 0.645249@0] [0x1b48] = 0x0
[ 0.645251@0] [0x1b6e] = 0x2
[ 0.645252@0] [0x1c18] = 0x4e01
[ 0.645254@0] [0x1b64] = 0x61
[ 0.645256@0] [0x1b65] = 0x4061
[ 0.645257@0] [0x1b66] = 0x5061
[ 0.645259@0] [0x1b78] = 0x0
[ 0.645260@0] [0x1b79] = 0x0
[ 0.645262@0] [0x1b7a] = 0x0
[ 0.645264@0] [0x1b7b] = 0x0
[ 0.645265@0] [0x1b7c] = 0x0
[ 0.645267@0] [0x1b7d] = 0x0
[ 0.645268@0] [0x271a] = 0x5
[ 0.645270@0] [0x1bfc] = 0x2000
[ 0.645272@0] [0x1c0b] = 0x1111
[ 0.645273@0] [0x1c0c] = 0x11
[ 0.645275@0] [0x1b80] = 0x0
[ 0.645276@0] [0x1b57] = 0x1
[ 0.645278@0] [0x1bf2] = 0x1b
[ 0.645279@0] [0x1b56] = 0x333
[ 0.645281@0] [0x1b05] = 0x5
[ 0.645283@0] [0x1c5a] = 0x1
[ 0.645284@0] [0x1c5b] = 0xfc48
[ 0.645286@0] [0x1b30] = 0x0
[ 0.645288@0] tvoutc_setmode[452]
[ 0.645292@0] mode is: 8
[ 0.645295@0] config HPLL
[ 0.645298@0] set_hpll_clk_out[230] clk = 1080
[ 0.645300@0] config HPLL done
[ 1.004850@1] Disable timerD
[ 1.649607@0] call aml_pmu_probe_init in
[ 1.649911@0] get property: use_pwm, value:0x00000001, dec: 1
[ 1.655617@0] get property: table_count, value:0x00000010, dec: 16
[ 1.663359@0] meson_cs_dvfs_probe, table count:16, use_pwm:1, pwm controller:2
[ 1.670551@0] 0, 00130009, 1010000
[ 1.674014@0] 1, 0012000a, 1050000
[ 1.677486@0] 2, 0011000b, 1070000
[ 1.680967@0] 3, 0010000c, 1090000
[ 1.684430@0] 4, 000f000d, 1110000
[ 1.687909@0] 5, 000e000e, 1130000
[ 1.691374@0] 6, 000d000f, 1150000
[ 1.694846@0] 7, 000c0010, 1170000
[ 1.698323@0] 8, 000b0011, 1190000
[ 1.701790@0] 9, 000a0012, 1210000
[ 1.705262@0] 10, 00090013, 1220000
[ 1.708754@0] 11, 00080014, 1240000
[ 1.712207@0] 12, 00070015, 1270000
[ 1.715678@0] 13, 00060016, 1280000
[ 1.719159@0] 14, 00050017, 1300000
[ 1.722622@0] 15, 00040018, 1320000
[ 1.726146@0] get pin for pwm--------
[ 1.729753@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
[ 1.730148@0] Advanced Linux Sound Architecture Driver Initialized.
[ 1.736918@0] cfg80211: Calling CRDA to update world regulatory domain
[ 1.743303@0] Switching to clocksource Timer-E
[ 1.757702@0] NET: Registered protocol family 2
[ 1.758242@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.763874@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.770572@0] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.777047@0] TCP: reno registered
[ 1.780292@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.786397@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.793111@0] NET: Registered protocol family 1
[ 1.797661@0] RPC: Registered named UNIX socket transport module.
[ 1.803460@0] RPC: Registered udp transport module.
[ 1.808341@0] RPC: Registered tcp transport module.
[ 1.813181@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.820464@0] wifi_dev_probe
[ 1.822647@0] wifi_dt : interrupt_pin=GPIOX_11
[ 1.827132@0] wifi_dt : irq_num=null
[ 1.830628@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
[ 1.835750@0] wifi_dt : power_on_pin=GPIOC_7
[ 1.840023@0] interrupt_pin=52, irq_num=4, irq_trigger_type=0, power_on_pin=112,clock_32k_pin=53
[ 1.849259@0] Unpacking initramfs...
[ 1.898436@0] Freeing initrd memory: 948K (c4008000 - c40f5000)
[ 1.900665@1] balance_pgdat end zone=0, pgdat_is_balanced=0
[ 1.900757@0] bounce pool size: 64 pages
[ 1.910533@0] Registering unionfs 2.6 (for 3.10.53)
[ 1.911577@0] NFS: Registering the id_resolver key type
[ 1.915012@0] Key type id_resolver registered
[ 1.919416@0] Key type id_legacy registered
[ 1.923519@0] NTFS driver 2.1.30 [Flags: R/W].
[ 1.928294@0] msgmni has been set to 1168
[ 1.932882@0] io scheduler noop registered
[ 1.935988@0] io scheduler deadline registered (default)
[ 1.946425@0] loop: module loaded
[ 1.947726@0] tun: Universal TUN/TAP device driver, 1.6
[ 1.949788@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.956448@0] usbcore: registered new interface driver asix
[ 1.962563@0] usbcore: registered new interface driver ax88179_178a
[ 1.968121@0] usbcore: registered new interface driver cdc_ether
[ 1.974006@0] usbcore: registered new interface driver net1080
[ 1.979840@0] usbcore: registered new interface driver cdc_subset
[ 1.985892@0] usbcore: registered new interface driver zaurus
[ 1.991685@0] usbcore: registered new interface driver cdc_ncm
[ 1.997692@0] usbcore: registered new interface driver usb-storage
[ 2.003521@0] i2c /dev entries driver
[ 2.007899@0] wetekplay_led_init_module
[ 2.011540@0] vout_init_module
[ 2.014055@0] start init vout module
[ 2.017884@0] create vout attribute ok
[ 2.021892@0] ge2d_init
[ 2.024181@0] ge2d_dev major:249
[ 2.027775@0] ge2d start monitor
[ 2.030818@0] osd_init
[ 2.030824@1] ge2d workqueue monitor start
[ 2.037371@0] osd_probe, vinfo:c05ce880
[ 2.041236@0] Frame buffer memory assigned at phy:0x87100000, vir:0xfb000000, size=16384K
[ 2.049390@0] osd_probe, mydef_var:c0800198, vinfo:c05ce880
[ 2.054819@0] init fbdev bpp is :32
[ 2.058388@0] ---------------clear framebuffer0 memory
[ 2.085323@0] Frame buffer memory assigned at phy:0x88100000, vir:0xefe00000, size=1024K
[ 2.087783@0] osd_probe, mydef_var:c0800198, vinfo:c05ce880
[ 2.093320@0] ---------------clear framebuffer1 memory
[ 2.125250@0] osd probe ok
[ 2.128462@0] DI: di_init
[ 2.128514@0] DI: di_probe
[ 2.128988@0] aml_wdt_driver_init,301
[ 2.129011@0] ** disable watchdog
[ 2.130501@0] keys===========================================
[ 2.136036@0] keys_devno=f600000
[ 2.139555@0] securitykey: device aml_keys created
[ 2.144031@0] amlkeys=0
[ 2.146551@0] platform_driver_register--aml_keys_driver--------------------
[ 2.153782@0] set uart_ao pinmux use pinctrl subsystem
[ 2.158567@0] P_AO_RTI_PIN_MUX_REG:1861
[ 2.162350@0] start uart_ao_ttyS0:(irq = 122)
[ 2.166689@0] register uart_ao ok
[ 2.170247@0] start uart_a_ttyS1:(irq = 58)
[ 2.174139@0] register uart_a ok
[ 2.177700@0] start uart_d_ttyS4:(irq = 126)
[ 2.181604@0] register uart_d ok
[ 2.184959@0] dwc_otg: version 3.10a 12-MAY-2014
[ 2.189488@0] dwc_otg lm-root: dwc_otg_driver_probe(ee962c00)
[ 2.189498@0] dwc_otg_driver_probe NOT match
[ 2.193689@0] dwc_otg lm1: dwc_otg_driver_probe(ee962e00)
[ 2.193709@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: f1108420, ctrl: f32c0000
[ 2.702149@0] USB (1) use clock source: XTAL input
[ 2.703176@0] dwc_otg lm1: base=0xf32c0000
[ 2.703183@0] dwc_otg lm1: dwc_otg_device=0xee9f23c0
[ 2.903173@0] Core Release: 2.94a
[ 2.903197@0] Setting default values for core params
[ 2.905804@0] curmode: 1, host_only: 1
[ 2.909564@0] dwc_otg lm1: DMA config: BURST_DEFAULT
[ 3.309561@0] Using Buffer DMA mode
[ 3.309584@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.311920@0] Working on port type = HOST
[ 3.315986@0] dwc_otg lm1: DWC OTG Controller
[ 3.320300@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
[ 3.326988@0] dwc_otg lm1: irq 63, io mem 0x00000000
[ 3.331884@0] -------hcd->flags.d32 = 0
[ 3.335723@0] Init: Port Power? op_state=1
[ 3.339805@0] Init1: Power Port (0)
[ 3.343377@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.350232@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.357599@0] usb usb1: Product: DWC OTG Controller
[ 3.362439@0] usb usb1: Manufacturer: Linux 3.10.61 dwc_otg_hcd
[ 3.368371@0] usb usb1: SerialNumber: lm1
[ 3.372859@0] hub 1-0:1.0: USB hub found
[ 3.376250@0] hub 1-0:1.0: 1 port detected
[ 3.380564@0] dwc_otg lm0: dwc_otg_driver_probe(ee963000)
[ 3.380605@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: f1108400, ctrl: f3240000
[ 3.389016@0] dwc_otg lm0: base=0xf3240000
[ 3.389025@0] dwc_otg lm0: dwc_otg_device=0xeebf1d80
[ 3.577003@0] Indeed it is in host mode hprt0 = 00021501
[ 3.606982@0] Core Release: 2.94a
[ 3.607014@0] Setting default values for core params
[ 3.609607@0] curmode: 1, host_only: 0
[ 3.766978@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.768175@1] Indeed it is in host mode hprt0 = 00001101
[ 3.968105@1] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 3.969339@1] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.976629@1] usb 1-1: Product: USB2.0 Hub
[ 3.987051@1] hub 1-1:1.0: USB hub found
[ 3.987344@1] hub 1-1:1.0: 4 ports detected
[ 4.013707@0] dwc_otg lm0: DMA config: BURST_DEFAULT
[ 4.420677@0] Using Buffer DMA mode
[ 4.420700@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[ 4.423037@0] Working on port type = OTG
[ 4.426945@0] Current port type: SLAVE
[ 4.430776@0] dwc_otg lm0: DWC OTG Controller
[ 4.435030@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
[ 4.441748@0] dwc_otg lm0: irq 62, io mem 0x00000000
[ 4.446700@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.453628@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.460991@0] usb usb2: Product: DWC OTG Controller
[ 4.465833@0] usb usb2: Manufacturer: Linux 3.10.61 dwc_otg_hcd
[ 4.471752@0] usb usb2: SerialNumber: lm0
[ 4.476235@0] hub 2-0:1.0: USB hub found
[ 4.479687@0] hub 2-0:1.0: 1 port detected
[ 4.483869@0] Dedicated Tx FIFOs mode
[ 4.487554@0] using timer detect id change, eea19800
[ 4.492434@0] Amlogic nand flash Kernel driver, Version K1.06.015 (c) 2010 Amlogic Inc.
[ 4.500331@0] ####Version of Uboot must be newer than U1.06.011!!!!!
[ 4.506835@0] ===========================================m3_nand_probe:1230,nand device tree ok,dev-nam1
[ 4.516728@0] m3_get_nand_platform:1682,find enable pad finished
[ 4.522722@0] m3_get_nand_platform:1695,find busy_pad finished
[ 4.528536@0] m3_get_nand_platform:1707,find timming_mode finished
[ 4.534664@0] m3_get_nand_platform:1719,find bch_mode finished
[ 4.540500@0] m3_get_nand_platform:1731,find plane_modefinished
[ 4.546396@0] m3_get_nand_platform:1787,parse dts
[ 4.551090@0] chip->controller=c087f1c4
[ 4.554890@0] ###plat->platform_nand_data.chip.nr_chips =2
[ 4.560389@0] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.0ns
[ 4.568706@0] No NAND device found
[ 4.572019@0] NAND device id: 2c 44 44 4b a9 0
[ 4.576424@0] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron D revision NAND 4GiB MT29F32G08)
[ 4.592224@0] 1 NAND chips detected
[ 4.592295@0] aml_nand_init auto detect RB pin here and por_cfg:3dd
[ 4.596316@0] aml_nand_init detect without RB pin here
[ 4.601467@1] HOST mode
[ 4.601483@0] #####aml_nand_init, none RB and chip->chip_delay:100
[ 4.601492@0] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.0ns
[ 4.601499@0] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_E
[ 4.601502@0] aml_chip->oob_fill_cnt =168,aml_chip->oob_size =744,bch_bytes =70
[ 4.601506@0] multi plane error for selected plane mode: NAND_TWO_PLANE_MODE force plane to : NAND_SINGE
[ 4.601514@0] oob layout use nand base oob layout oobsize = 32,oobmul =1,mtd->oobsize =744,aml_chip->o4
[ 4.617829@0] aml nand env valid addr: 28000
[ 4.617834@0] CONFIG_ENV_SIZE=0x8000; ENV_SIZE=0x7ffc; bbt=0x1330; default_environment_size=0x0
[ 4.651119@0] nand env: nand_env_probe.
[ 4.651661@0] nand key: nand_key_probe.
[ 4.651674@0] key start_blk=2040,end_blk=2047,aml_nand_key_init:595
[ 4.660805@0] aml nand key valid addr: ff010000
[ 4.660807@0] aml nand key valid addr: ff210000
[ 4.660809@0] aml nand key valid addr: ff410000
[ 4.660811@0] aml nand key valid addr: ff610000
[ 4.660818@0] CONFIG_KEYSIZE=0x10000; KEYSIZE=0xfffc; bbt=0x1330; default_keyironment_size=0xeccc
[ 4.660852@0] i=0,register --- nand_key
[ 4.664520@0] Creating 4 MTD partitions on "D revision NAND 4GiB MT29F32G08CBADA":
[ 4.664528@0] 0x000000800000-0x000001000000 : "boot"
[ 4.665681@0] 0x000001000000-0x000001800000 : "recovery"
[ 4.666681@0] 0x000001800000-0x000002000000 : "logo"
[ 4.667712@0] 0x000002000000-0x0000ff000000 : "data"
[ 4.667723@0] NAND bbt detect factory Bad block at b400000
[ 4.667725@0] NAND bbt detect factory Bad block at b600000
[ 4.667741@0] NAND bbt detect Bad block at 21400000
[ 4.668995@0] HD��E��@P�������PD�����B�@Q�init_aml_nftl start
[ 4.669005@0] mtd->name: data
[ 4.669022@0] nftl version 131206a
[ 4.669174@0] nftl part attr 0
[ 4.669198@0] NAND bbt detect factory Bad block at b400000
[ 4.669200@0] NAND bbt detect factory Bad block at b600000
[ 4.669221@0] NAND bbt detect Bad block at 21400000
[ 4.669405@0] size_in_blk 2024; total_block 2022;
[ 4.669407@0] nftl start:2022,252
[ 4.673240@0] first
[ 4.701724@0] NAND bbt detect factory Bad block at b400000
[ 4.701727@0] NAND bbt detect factory Bad block at b600000
[ 4.767268@0] NAND bbt detect Bad block at 21400000
[ 4.826971@1] -------hcd->flags.d32 = 0
[ 4.827033@1] Init: Port Power? op_state=1
[ 4.829240@1] Init1: Power Port (0)
[ 4.832714@1] set usb port power on (board gpio 104)!
[ 5.431160@0] second 0,1770
[ 5.431182@0] all block full!!
[ 5.431465@0] free block cnt = 2021
[ 5.434825@0] nftl ok!
[ 5.437484@0] aml_nftl_blk->mbd.tr.name =data
[ 5.442334@0] data: unknown partition table
[ 5.446075@0] aml_nftl_add_mtd ok
[ 5.449144@0] init_aml_nftl end
[ 5.452336@0] ethernet_driver probe!
[ 5.455750@0] Please config phy interface.
[ 5.459951@0] Please config savepowermode.
[ 5.463990@0] Please config reset_pin_enable.
[ 5.468359@0] Please config reset_delay.
[ 5.472235@0] Please config reset_pin.
[ 5.475967@0] Please config new_maclogic.
[ 5.480009@0] ethernetinit(dbg[c080be20]=1)
[ 5.484155@0] ethernet base addr is f3610000
[ 5.488417@0] write mac add to:eebca208: e8 18 63 50 6d e0 |.cPm.|
[ 5.496872@0] libphy: AMLMAC MII Bus: probed
[ 5.498937@0] eth0: PHY ID 0007c0f1 at 1 IRQ -1 (0:01) active
[ 5.506558@0] Amlogic A/V streaming port init
[ 5.511128@0] init vdec memsource -1971322880->-1937768449
[ 5.514641@0] [tsync_pcr_init]init success.
[ 5.518734@0] amvideocap_init_module
[ 5.522317@0] amvideocap_probe,amvideocap
[ 5.526234@0] amvideocap_dev_register buf:8db00000,size:a00000.
[ 5.532992@0] regist mpeg12 codec profile
[ 5.536222@0] regist mpeg4 codec profile
[ 5.540074@0] amvdec_vc1 module init
[ 5.543703@0] regist vc1 codec profile
[ 5.547354@0] amvdec_h264 module init
[ 5.551112@0] regist h264 codec profile
[ 5.554785@0] amvdec_h264mvc module init
[ 5.558905@0] regist hmvc codec profile
[ 5.562608@0] regist mjpeg codec profile
[ 5.566418@0] amvdec_real module init
[ 5.570193@0] regist real codec profile
[ 5.574215@0] alloc_keep_buffer keep_y_addr ed400000
[ 5.578892@0] alloc_keep_buffer keep_u_addr ed900000
[ 5.583784@0] alloc_keep_buffer keep_v_addr eda00000
[ 5.588755@0] yaddr=ed400000,u_addr=ed900000,v_addr=eda00000
[ 5.594778@0] create_ge2d_work_queue video task ok
[ 5.599821@0] efuse===========================================
[ 5.605329@0] efuse: device efuse created
[ 5.609239@0] efuse--------------------------------------------
[ 5.614936@0] SARADC Driver init.
[ 5.618475@0] __saradc_probe__
[ 5.767078@1] saradc calibration: ref_val = 516
[ 5.767104@1] saradc calibration: ref_nominal = 512
[ 5.770824@1] saradc calibration: coef = 4177
[ 5.775296@1] ADC Keypad Driver init.
[ 5.778893@1] ==kp_probe==
[ 5.781530@1] chan #4 used for ADC key
[ 5.785233@1] menu key(139) registed.
[ 5.788904@1] vol- key(114) registed.
[ 5.792525@1] vol+ key(115) registed.
[ 5.796170@1] back key(158) registed.
[ 5.799834@1] home key(102) registed.
[ 5.803462@1] ok key(232) registed.
[ 5.807156@1] input: adc_keypad as /devices/platform/adc_keypad.3/input/input0
[ 5.814364@1] adc keypad register input device completed.
[ 5.819632@1] adc keypad major:241
[ 5.823419@1] Meson KeyInput init
[ 5.826468@1] Key 116 registed.
[ 5.829710@1] input: key_input as /devices/platform/key_input.4/input/input1
[ 5.836697@1] Meson KeyInput register RTC interrupt
[ 5.841266@1] Meson KeyInput major=240
[ 5.845488@1] spi_nor_init
[ 5.848000@1] amlogic_spi_nor_probe:
[ 5.851381@1] amlogic_spi->state_name:default
[ 5.855925@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
[ 5.863439@1] check_storage_device : spi boot_device_flag : 0
[ 5.869014@1] spi_nor_probe
[ 5.871816@1] spi_nor apollospi:32766: mx25l3205d (4096 Kbytes)
[ 5.877954@1] Creating 2 MTD partitions on "apollospi:32766":
[ 5.883409@1] 0x000000000000-0x000000100000 : "bootloader"
[ 5.889804@1] 0x000000100000-0x000000108000 : "ubootenv"
[ 5.894949@1] amlogic_spi_nor_probe over
[ 5.898328@1] mmc driver version: 1.07, 2014-09-23: eMMC fix the SDIO data1 interrupt caused timeout erm
[ 5.909393@1] host->base f1108c20
[ 5.911742@1] pdata->caps 7
[ 5.914480@1] pdata->caps2 0
[ 5.917373@1] get property: port, value:0x00000001
[ 5.923854@1] get property: ocr_avail, value:0x00200000
[ 5.930514@1] get property: f_min, value:0x000493e0
[ 5.936874@1] get property: f_max, value:0x02faf080
[ 5.943416@1] get property: f_max_w, value:0x02faf080
[ 5.949910@1] get property: max_req_size, value:0x00020000
[ 5.956404@1] get property: irq_in, value:0x00000005
[ 5.962932@1] get property: irq_out, value:0x00000006
[ 5.969445@1] get property: power_level, value:0x00000000
[ 5.975939@1] get property: gpio_cd, str:CARD_6
[ 5.982063@1] get property: gpio_power, str:CARD_8
[ 5.987927@1] get property: pinname, str:sd
[ 5.993556@1] get property: card_type, value:0x00000005
[ 6.000079@1] get property: gpio_dat3, str:CARD_3
[ 6.047036@0] pdata->caps 107
[ 6.047056@0] pdata->caps2 0
[ 6.047229@0] get property: port, value:0x00000000
[ 6.053736@0] get property: ocr_avail, value:0x00200000
[ 6.060278@0] get property: f_min, value:0x000493e0
[ 6.066763@0] get property: f_max, value:0x02faf080
[ 6.073296@0] get property: f_max_w, value:0x02faf080
[ 6.079804@0] get property: max_req_size, value:0x00020000
[ 6.086297@0] get property: pinname, str:sdio
[ 6.092128@0] get property: card_type, value:0x00000003
[ 6.176968@1] [aml_sdio_probe] aml_sdio_probe() success!
[ 6.177235@1] [dsp]DSP start addr 0xc5000000
[ 6.180918@1] [dsp]register dsp to char divece(257)
[ 6.186156@1] name=nand_key nand_key
[ 6.189360@1] read:addr:0xff010000,phy_blk_addr:2040,phy_page_addr:8,aml_nand_get_key:129
[ 6.200947@1] register_aes_algorithm:482,old way
[ 6.202090@1] unkown current key-name,key_read_show:1396
[ 6.207378@1] get keyexample fail, aml_rtc_probe:750
[ 6.213196@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
[ 6.220331@1] wetek-dvb dvb.8: Found Wetek i2c-1 adapter ...
[ 6.224029@1] wetek-dvb dvb.8: Found Wetek i2c-2 adapter ...
[ 6.229855@1] wetek-dvb dvb.8: ts0: parallel
[ 6.234022@1] wetek-dvb dvb.8: ts2: parallel
[ 7.056970@1] wetek-dvb dvb.8: Wetek NIM(s) detection in progress ...
[ 7.057771@1] wetek-dvb dvb.8: Checking for Sony CXD2837 DVB-C/T/T2 demod ...
[ 7.064958@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6c
[ 7.073880@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6c
[ 7.082938@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6c
[ 7.091734@1] i2c i2c-1: i2c wr failed=-11 reg=00
[ 7.096525@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6e
[ 7.105472@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6e
[ 7.114424@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6e
[ 7.123313@1] i2c i2c-1: i2c wr failed=-11 reg=00
[ 7.128210@1] wetek-dvb dvb.8: Checking for Panasonic MN88436 ATSC demod ...
[ 7.135157@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x18
[ 7.144098@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x18
[ 7.153038@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x18
[ 7.161938@1] i2c i2c-1: i2c wr failed=-11 reg=10
[ 7.166707@1] wetek-dvb dvb.8: Checking for AVL6211 DVB-S/S2 demod ...
[ 7.173536@1] i2c i2c-1: AVL6211+AV2011 DVB-S/S2 successfully attached
[ 7.179855@1] wetek-dvb dvb.8: Checking for AVL6211 DVB-S/S2 demod ...
[ 7.186546@1] i2c i2c-2: AVL6211+AV2011 DVB-S/S2 successfully attached
[ 7.192754@1] wetek-dvb dvb.8: Total Wetek NIM(s) found: 2
[ 7.199050@1] UMP: UMP device driver loaded
[ 7.202466@1] aml_hw_crypto initialization.
[ 7.207383@1] usbcore: registered new interface driver snd-usb-audio
[ 7.213542@1] dummy_codec_platform_probe
[ 7.217124@1] enter aml_dai_probe
[ 7.217616@1] enter dummy_codec_audio_probe
[ 7.221239@1] soc-audio soc-audio: ASoC: machine AML-DUMMY-CODEC should use snd_soc_register_card()
[ 7.230534@1] rtd eebc1810
[ 7.232845@1] cpu_dai eddd7300
[ 7.235970@1] codec_dai eddd7400
[ 7.239369@1] enter aml_platform_pcm_new (codec_dai: dummy_codec 1 cpu_dai: aml-dai0 0)
[ 7.239904@1] aml-pcm 0:playback preallocate_dma_buffer: area=efc52000, addr=ada80000, size=131072
[ 7.249572@1] iec958 0: preallocate dma buffer start=efce9000, size=80000
[ 7.255697@1] aml-pcm 1:capture preallocate_dma_buffer: area=efd6a000, addr=adc80000, size=65536
[ 7.263820@1] soc-audio soc-audio: dummy_codec <-> aml-dai0 mapping ok
[ 7.271360@1] =dummy_codec_device_init==,dummy_codec_audio init done
[ 7.276926@1] nf_conntrack version 0.5.0 (13702 buckets, 54808 max)
[ 7.283793@1] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.288506@1] TCP: cubic registered
[ 7.291873@1] NET: Registered protocol family 17
[ 7.296494@1] NET: Registered protocol family 15
[ 7.301223@1] Key type dns_resolver registered
[ 7.305833@1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 7.313326@1] Registering SWP/SWPB emulation handler
[ 7.318307@1] enter meson_pm_init
[ 7.321760@1] enter meson_pm_probe!
[ 7.325031@1] meson_pm_probe done !
[ 7.329875@1] regulator-dummy: disabling
[ 7.332932@0] UBI: attaching mtd3 to ubi0
[ 7.400928@0] NAND bbt detect factory Bad block at b400000
[ 7.400960@0] NAND bbt detect factory Bad block at b600000
[ 7.556507@0] NAND bbt detect Bad block at 21400000
[ 9.103054@0] UBI: scanning is finished
[ 9.108653@0] UBI: attached mtd3 (name "data", size 4048 MiB) to ubi0
[ 9.109461@0] UBI: PEB size: 2097152 bytes (2048 KiB), LEB size: 2080768 bytes
[ 9.116663@0] UBI: min./max. I/O unit sizes: 8192/8192, sub-page size 8192
[ 9.123583@0] UBI: VID header offset: 8192 (aligned 8192), data offset: 16384
[ 9.130685@0] UBI: good PEBs: 2021, bad PEBs: 3, corrupted PEBs: 0
[ 9.136801@0] UBI: user volume: 4, internal volumes: 1, max. volumes count: 128
[ 9.144122@0] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1096786411
[ 9.153326@0] UBI: available PEBs: 107, total reserved PEBs: 1914, PEBs reserved for bad PEB handling: 7
[ 9.162876@1] UBI: background thread "ubi_bgt0d" started, PID 967
[ 9.168935@0] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:15 UTC (15)
[ 9.176473@0] meson_cpufreq: no voltage_control prop
[ 9.181390@0] voltage_control = 0
[ 9.184791@0] ------------[ cut here ]------------
[ 9.189415@0] WARNING: at kernel/smp.c:382 smp_call_function_many+0xc4/0x2cc()
[ 9.196601@0] Modules linked in:
[ 9.199817@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.61 #2
[ 9.206003@0] [<c0014b08>] (unwind_backtrace+0x0/0xf8) from [<c0011bec>] (show_stack+0x10/0x14)
[ 9.214671@0] [<c0011bec>] (show_stack+0x10/0x14) from [<c002a2c8>] (warn_slowpath_common+0x4c/0x6c)
[ 9.223778@0] [<c002a2c8>] (warn_slowpath_common+0x4c/0x6c) from [<c002a304>] (warn_slowpath_null+0x1c/)
[ 9.233585@0] [<c002a304>] (warn_slowpath_null+0x1c/0x24) from [<c006c7b4>] (smp_call_function_many+0xc)
[ 9.243655@0] [<c006c7b4>] (smp_call_function_many+0xc4/0x2cc) from [<c006cb50>] (smp_call_function+0x3)
[ 9.253636@0] [<c006cb50>] (smp_call_function+0x34/0x68) from [<c001b5b4>] (clk_set_rate_a9+0x9c/0xd4)
[ 9.262922@0] [<c001b5b4>] (clk_set_rate_a9+0x9c/0xd4) from [<c001ba40>] (meson_clk_set_rate+0x128/0x17)
[ 9.272469@0] [<c001ba40>] (meson_clk_set_rate+0x128/0x174) from [<c001bb2c>] (clk_set_rate+0xa0/0xc4)
[ 9.281767@0] [<c001bb2c>] (clk_set_rate+0xa0/0xc4) from [<c0379748>] (meson_cpufreq_target_locked.isra)
[ 9.292438@0] [<c0379748>] (meson_cpufreq_target_locked.isra.1+0x114/0x1cc) from [<c0379824>] (meson_cp)
[ 9.303814@0] [<c0379824>] (meson_cpufreq_target+0x24/0x3c) from [<c03049f0>] (__cpufreq_driver_target+)
[ 9.314056@0] [<c03049f0>] (__cpufreq_driver_target+0x50/0x74) from [<c0308d8c>] (dbs_check_cpu+0x1ec/0)
[ 9.323856@0] [<c0308d8c>] (dbs_check_cpu+0x1ec/0x288) from [<c030937c>] (cpufreq_governor_dbs+0x500/0x)
[ 9.333579@0] [<c030937c>] (cpufreq_governor_dbs+0x500/0x900) from [<c0305488>] (__cpufreq_governor+0x7)
[ 9.343648@0] [<c0305488>] (__cpufreq_governor+0x7c/0x1c4) from [<c0305b30>] (__cpufreq_set_policy+0x19)
[ 9.353717@0] [<c0305b30>] (__cpufreq_set_policy+0x198/0x1d8) from [<c0305d64>] (cpufreq_add_dev_interf)
[ 9.364479@0] [<c0305d64>] (cpufreq_add_dev_interface+0x1f4/0x250) from [<c03060c0>] (cpufreq_add_dev+0)
[ 9.374816@0] [<c03060c0>] (cpufreq_add_dev+0x300/0x454) from [<c0278af8>] (subsys_interface_register+0)
[ 9.384968@0] [<c0278af8>] (subsys_interface_register+0x80/0xc4) from [<c0305100>] (cpufreq_register_dr)
[ 9.395730@0] [<c0305100>] (cpufreq_register_driver+0x80/0x190) from [<c027ac10>] (platform_drv_probe+0)
[ 9.405885@0] [<c027ac10>] (platform_drv_probe+0x14/0x18) from [<c02799d0>] (driver_probe_device+0x78/0)
[ 9.415691@0] [<c02799d0>] (driver_probe_device+0x78/0x214) from [<c0279bf8>] (__driver_attach+0x8c/0x9)
[ 9.425239@0] [<c0279bf8>] (__driver_attach+0x8c/0x90) from [<c0278144>] (bus_for_each_dev+0x54/0x88)
[ 9.434441@0] [<c0278144>] (bus_for_each_dev+0x54/0x88) from [<c027915c>] (bus_add_driver+0xd4/0x22c)
[ 9.443641@0] [<c027915c>] (bus_add_driver+0xd4/0x22c) from [<c027a0b0>] (driver_register+0x78/0x14c)
[ 9.452842@0] [<c027a0b0>] (driver_register+0x78/0x14c) from [<c027adf8>] (platform_driver_probe+0x18/0)
[ 9.462563@0] [<c027adf8>] (platform_driver_probe+0x18/0x9c) from [<c00085bc>] (do_one_initcall+0xec/0x)
[ 9.472291@0] [<c00085bc>] (do_one_initcall+0xec/0x14c) from [<c079fb64>] (kernel_init_freeable+0xfc/0x)
[ 9.482015@0] [<c079fb64>] (kernel_init_freeable+0xfc/0x1c8) from [<c058aefc>] (kernel_init+0x8/0xe4)
[ 9.491210@0] [<c058aefc>] (kernel_init+0x8/0xe4) from [<c000e2d8>] (ret_from_fork+0x14/0x3c)
[ 9.499710@0] ---[ end trace 39bd422f7f588bcd ]---
[ 9.504483@0] ------------[ cut here ]------------
[ 9.509261@0] WARNING: at kernel/smp.c:244 smp_call_function_single+0x150/0x1c0()
[ 9.516720@0] Modules linked in:
[ 9.519936@0] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.61 #2
[ 9.527058@0] [<c0014b08>] (unwind_backtrace+0x0/0xf8) from [<c0011bec>] (show_stack+0x10/0x14)
[ 9.535739@0] [<c0011bec>] (show_stack+0x10/0x14) from [<c002a2c8>] (warn_slowpath_common+0x4c/0x6c)
[ 9.544851@0] [<c002a2c8>] (warn_slowpath_common+0x4c/0x6c) from [<c002a304>] (warn_slowpath_null+0x1c/)
[ 9.554659@0] [<c002a304>] (warn_slowpath_null+0x1c/0x24) from [<c006c680>] (smp_call_function_single+0)
[ 9.564988@0] [<c006c680>] (smp_call_function_single+0x150/0x1c0) from [<c006cb50>] (smp_call_function+)
[ 9.575230@0] [<c006cb50>] (smp_call_function+0x34/0x68) from [<c001b5b4>] (clk_set_rate_a9+0x9c/0xd4)
[ 9.584516@0] [<c001b5b4>] (clk_set_rate_a9+0x9c/0xd4) from [<c001ba40>] (meson_clk_set_rate+0x128/0x17)
[ 9.594064@0] [<c001ba40>] (meson_clk_set_rate+0x128/0x174) from [<c001bb2c>] (clk_set_rate+0xa0/0xc4)
[ 9.603355@0] [<c001bb2c>] (clk_set_rate+0xa0/0xc4) from [<c0379748>] (meson_cpufreq_target_locked.isra)
[ 9.614031@0] [<c0379748>] (meson_cpufreq_target_locked.isra.1+0x114/0x1cc) from [<c0379824>] (meson_cp)
[ 9.625402@0] [<c0379824>] (meson_cpufreq_target+0x24/0x3c) from [<c03049f0>] (__cpufreq_driver_target+)
[ 9.635644@0] [<c03049f0>] (__cpufreq_driver_target+0x50/0x74) from [<c0308d8c>] (dbs_check_cpu+0x1ec/0)
[ 9.645451@0] [<c0308d8c>] (dbs_check_cpu+0x1ec/0x288) from [<c030937c>] (cpufreq_governor_dbs+0x500/0x)
[ 9.655173@0] [<c030937c>] (cpufreq_governor_dbs+0x500/0x900) from [<c0305488>] (__cpufreq_governor+0x7)
[ 9.665242@0] [<c0305488>] (__cpufreq_governor+0x7c/0x1c4) from [<c0305b30>] (__cpufreq_set_policy+0x19)
[ 9.675312@0] [<c0305b30>] (__cpufreq_set_policy+0x198/0x1d8) from [<c0305d64>] (cpufreq_add_dev_interf)
[ 9.686075@0] [<c0305d64>] (cpufreq_add_dev_interface+0x1f4/0x250) from [<c03060c0>] (cpufreq_add_dev+0)
[ 9.696405@0] [<c03060c0>] (cpufreq_add_dev+0x300/0x454) from [<c0278af8>] (subsys_interface_register+0)
[ 9.706560@0] [<c0278af8>] (subsys_interface_register+0x80/0xc4) from [<c0305100>] (cpufreq_register_dr)
[ 9.717323@0] [<c0305100>] (cpufreq_register_driver+0x80/0x190) from [<c027ac10>] (platform_drv_probe+0)
[ 9.727479@0] [<c027ac10>] (platform_drv_probe+0x14/0x18) from [<c02799d0>] (driver_probe_device+0x78/0)
[ 9.737286@0] [<c02799d0>] (driver_probe_device+0x78/0x214) from [<c0279bf8>] (__driver_attach+0x8c/0x9)
[ 9.746834@0] [<c0279bf8>] (__driver_attach+0x8c/0x90) from [<c0278144>] (bus_for_each_dev+0x54/0x88)
[ 9.756035@0] [<c0278144>] (bus_for_each_dev+0x54/0x88) from [<c027915c>] (bus_add_driver+0xd4/0x22c)
[ 9.765236@0] [<c027915c>] (bus_add_driver+0xd4/0x22c) from [<c027a0b0>] (driver_register+0x78/0x14c)
[ 9.774436@0] [<c027a0b0>] (driver_register+0x78/0x14c) from [<c027adf8>] (platform_driver_probe+0x18/0)
[ 9.784158@0] [<c027adf8>] (platform_driver_probe+0x18/0x9c) from [<c00085bc>] (do_one_initcall+0xec/0x)
[ 9.793881@0] [<c00085bc>] (do_one_initcall+0xec/0x14c) from [<c079fb64>] (kernel_init_freeable+0xfc/0x)
[ 9.803604@0] [<c079fb64>] (kernel_init_freeable+0xfc/0x1c8) from [<c058aefc>] (kernel_init+0x8/0xe4)
[ 9.812804@0] [<c058aefc>] (kernel_init+0x8/0xe4) from [<c000e2d8>] (ret_from_fork+0x14/0x3c)
[ 9.821304@0] ---[ end trace 39bd422f7f588bce ]---
[ 9.826685@0] hdmitx: cec: CEC init
[ 9.829651@1] hdmitx: cec: CEC task process
[ 9.829930@0] input: cec_input as /devices/virtual/input/input2
[ 9.830212@0] hdmitx: cec: hdmitx_device->cec_init_ready:0x1dhd_module_init: Enter
[ 9.830214@0] wifi_setup_dt
[ 9.830219@0] wifi_request_32k_clk : OFF-->ON for sdio_wifi
[ 9.830224@0] clock_32k_pin(53) : (null)
[ 9.830245@0] clock_32k_pin(53) : sdio_wifi
[ 9.830546@0] interrupt_pin(52) : (null)
[ 9.830552@0] wifi_dt : gpio op failed(-1) at line 250
[ 9.830559@0] interrupt_pin(52) : sdio_wifi
[ 9.830562@0] power_on_pin(112) : (null)
[ 9.830573@0] power_on_pin(112) : sdio_wifi
[ 9.830574@0] bt_setup
[ 9.977024@0] WIFI Disable! 112
[ 10.208596@1] WIFI Enable! 112
[ 10.497537@0] sdio: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 11.497269@0] [aml_sdio_timeout] time_start_cnt:998
[ 11.497269@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=0
[ 11.497269@0] [aml_sdio_timeout] time_start_cnt:994
[ 11.497269@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_0
[ 11.497269@0] [aml_sdio_timeout] time_start_cnt:990
[ 11.497269@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=10
[ 13.537658@0] <4>[ 13.578345@1] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 13.581108@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 13.586583@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 13.594054@1] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 13.642267@1] sdio: new high speed SDIO card at address 0001, clock 50000000, 4-bit-bus-width
[ 13.650613@1] [sdio_reinit] finish
[ 13.651034@1] =========== WLAN placed in POWER ON ========
[ 13.658029@1] bcmsdh_register: Linux Kernel SDIO/MMC Driver
[ 13.660978@1] dhd_customer_oob_irq_map: customer specific Host GPIO number is (100)
[ 13.674385@1] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 13.700742@1] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 13.709623@1] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 13.716950@1] dhdsdio_probe: Disable prop_txstatus
[ 13.721241@1] wl_create_event_handler(): thread:wl_event_handler:3d3 started
[ 13.723229@1] init wlan_priv_wake
[ 13.726641@1] tsk Enter, tsk = 0xefdc44cc
[ 13.730756@1] dhd_attach(): thread:dhd_watchdog_thread:3d4 started
[ 13.737268@1] dhd_attach(): thread:dhd_dpc:3d5 started
[ 13.742231@1] dhd_attach(): thread:dhd_sysioc:3d6 started
[ 13.754135@1] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[ 13.757795@1] =========== WLAN placed in RESET ========
[ 13.762257@1] init wifi power_wake lock
[ 13.767806@1]
[ 13.767806@1] Dongle Host Driver, version 1.88.45.4 (r420671)
[ 13.767806@1] Compiled in drivers/net/wireless/bcmdhd on Aug 20 2015 at 17:11:05
[ 13.780954@1] dhd_module_init: Exit error=0
[ 13.785648@1] ALSA device list:
[ 13.788411@1] #0: AML-DUMMY-CODEC
[ 13.793730@1] config uart_ao_ttyS0:: Character length 8bits/char
[ 13.807198@1] Changing uart_ao_ttyS0: baud from 0 to 115200
[ 13.828658@1] Freeing unused kernel memory: 168K (c079f000 - c07c9000)
[ 13.830253@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.830491@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.831840@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.832096@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.832350@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.833020@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.833360@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.834086@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.838406@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.838597@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.839273@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.839522@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.841598@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.846648@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.847240@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.847722@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.849773@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.850113@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.851713@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.851976@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.852225@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.853452@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.853759@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.856018@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.856623@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.857714@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.858361@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.858486@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.859092@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.859342@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.863215@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.865656@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.867866@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.869133@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.870758@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.871585@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.872781@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.873122@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.873843@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.876243@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.877578@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.878762@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.879491@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.879829@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.881539@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.884615@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.887281@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.887735@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.889735@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.889984@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.890333@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.890996@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.894074@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.894383@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.895255@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.896118@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.896240@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.896590@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.896906@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.898592@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.898848@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.900921@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.901139@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.901362@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.901963@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.903421@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.903609@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.904626@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.904748@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.904905@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.905092@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.906275@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.906532@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.907761@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.908016@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.909478@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.910531@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.911162@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.912739@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.912986@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.913390@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.913602@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.914472@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.914777@0] Uart 0 Driver: Overflow Error while receiving a character
[ 13.917249@0] Uart 0 Driver: Overflow Error while receiving a character
[ 14.816970@1] Connect Timeout
[ 14.819877@1] Device Not Connected/Responding
[ 16.599036@1] UBIFS: static UBI volume - read-only mode
[ 16.943546@1] UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
[ 16.950585@1] UBIFS: LEB size: 2080768 bytes (2032 KiB), min./max. I/O unit sizes: 8192 bytes/8192 bytes
[ 16.960162@1] UBIFS: FS size: 31211520 bytes (29 MiB, 15 LEBs), journal size 18726913 bytes (17 MiB, 9 )
[ 16.969922@1] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 16.975128@1] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 5749F6EC-78B3-4B3F-BE77-23C3CFFE3168, l
[ 17.319893@1] unionfs: new lower inode mtime (bindex=1, name=var)
[ 17.331433@1] unionfs: new lower inode mtime (bindex=1, name=var)
[ 17.508726@1] wetekdvb: module license 'Proprietary' taints kernel.
[ 17.508744@1] Disabling lock debugging due to kernel taint
[ 17.509886@1] wetek-dvb dvb.8: Loading ...
[ 17.796972@1] DVB: registering new adapter (WetekPlay_DVB)
[ 17.797006@1] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2).
[ 17.808117@1] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2).
[ 17.820097@1] wetek-dvb dvb.8: fifo0/2097152/1048576
[ 17.824303@1] wetek-dvb dvb.8: FLUSH FIFO0
[ 17.824318@1] wetek-dvb dvb.8: FLUSH ok
[ 17.824365@1] wetek-dvb dvb.8: fifo1/2097152/1048576
[ 17.834074@1] wetek-dvb dvb.8: FLUSH FIFO1
[ 17.834097@1] wetek-dvb dvb.8: FLUSH ok
[ 17.834111@1] wetek-dvb dvb.8: Loading finished
[ 17.907098@1] UBIFS: background thread "ubifs_bgt0_2" started, PID 1045
[ 18.076185@1] UBIFS: recovery needed
[ 18.390424@1] UBIFS: recovery completed
[ 18.390530@1] UBIFS: mounted UBI device 0, volume 2, name "persist"
[ 18.390539@1] UBIFS: LEB size: 2080768 bytes (2032 KiB), min./max. I/O unit sizes: 8192 bytes/8192 bytes
[ 18.390546@1] UBIFS: FS size: 18726912 bytes (17 MiB, 9 LEBs), journal size 14565377 bytes (13 MiB, 5 L)
[ 18.390551@1] UBIFS: reserved for root: 884517 bytes (863 KiB)
[ 18.390561@1] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6D76228D-6E82-4986-BFC0-ABA2988F5311, l
[ 18.437291@1] UBIFS: background thread "ubifs_bgt0_3" started, PID 1054
[ 18.599841@1] UBIFS: recovery needed
[ 19.070475@1] UBIFS: recovery completed
[ 19.070573@1] UBIFS: mounted UBI device 0, volume 3, name "data"
[ 19.070581@1] UBIFS: LEB size: 2080768 bytes (2032 KiB), min./max. I/O unit sizes: 8192 bytes/8192 bytes
[ 19.070589@1] UBIFS: FS size: 3739140096 bytes (3565 MiB, 1797 LEBs), journal size 33292288 bytes (31 M)
[ 19.070594@1] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[ 19.070604@1] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 884708CD-F7B3-49ED-BC98-B0581DF6BFF6, l
[ 19.409353@1] netdev_open
[ 19.409370@1] Ethernet reset
[ 19.409379@1] NET MDA descpter start addr=ee9ed000
[ 19.410408@1] phy_interface = 1
[ 19.410419@1] aml_phy_init: trying to attach to 0:01
[ 19.410466@1] /**************************************amlogic 8720 phy driver init*********************/
[ 19.410523@1] --1--write mac add to:eebca208: e8 18 63 50 6d e0 |.cPm.|
[ 19.410540@1] --2--write mac add to:eebca208: e8 18 63 50 6d e0 |.cPm.|
[ 19.410554@1] write mac add to:eebca208: e8 18 63 50 6d e0 |.cPm.|
[ 19.410571@1] Current DMA mode=0, set mode=621c100
[ 19.410611@1] eth0: opened (irq 40).
[ 19.410620@1] ether leave promiscuous mode
[ 19.410625@1] ether leave all muticast mode
[ 19.410682@1] changed the Multicast,mcount=1
[ 19.410694@1] add mac address:01:00:5e:00:00:01,bit=32
[ 19.410698@1] set hash low=0,high=1
[ 19.410703@1] changed the filter setting to :4
[ 19.630053@1] dhd_open: Enter eebc3000
[ 19.630085@1]
[ 19.630085@1] Dongle Host Driver, version 1.88.45.4 (r420671)
[ 19.630085@1] Compiled in drivers/net/wireless/bcmdhd on Aug 20 2015 at 17:11:05
[ 19.630096@1] wl_android_wifi_on in 1
[ 19.630103@1] wl_android_wifi_on in 2: g_wifi_on=0
[ 19.630117@1] WIFI Disable! 112
[ 19.881544@1] WIFI Enable! 112
[ 20.170642@1] sdio_reset_comm():
[ 20.186005@1] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 20.187894@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 20.189659@1] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 20.192834@1] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 20.208538@1] [sdio_reinit] finish
[ 20.311964@1] =========== WLAN going back to live ========
[ 20.312372@1]
[ 20.312372@1]
[ 20.312372@1] dhd_bus_devreset: == WLAN ON ==
[ 20.312383@1] dhd_bus_devreset called when dongle is not in reset
[ 20.312388@1] Will call dhd_bus_start instead
[ 20.312448@1] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 20.312617@1] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm40181a2.bin
[ 20.314627@1] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt
[ 20.314640@1] Final fw_path=/lib/firmware/brcm/fw_bcm40181a2.bin
[ 20.314646@1] Final nv_path=/lib/firmware/brcm/ap6210-nvram.txt
[ 20.314651@1] Final conf_path=/lib/firmware/brcm/config.txt
[ 20.366557@1] NVRAM version: GB9662_NVRAM_V1.3_12142012
[ 20.367430@1] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 20.367993@1] dhd_bus_init: delay 100ms for BCM43362
[ 20.596378@1] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 20.596509@1] bcmsdh_set_drvdata: Enter
[ 20.596516@1] bcmsdh_register_oob_intr: Enter
[ 20.596523@1] bcmsdh_register_oob_intr: IRQ=100 Type=414
[ 20.598158@1] dhd_conf_set_band: Set band 0
[ 20.599612@0] Firmware up: op_mode=0x0002, Broadcom Dongle Host Driver mac=02:1a:11:f3:83:3f
[ 20.599621@0] dhd_conf_set_country: Set country ALL, revision 0
[ 20.719759@1] Country code: ALL (ALL/0)
[ 20.721082@1] dhd_conf_set_roam: Set roam_off 1
[ 20.728997@1] dhdcdc_set_ioctl: msg->status:ffffffe9
[ 20.729052@1] dhd_preinit_ioctls buf_key_b4_m4 set failed -23
[ 20.739636@1] dhdcdc_set_ioctl: msg->status:ffffffe9
[ 20.741014@1] Driver: 1.88.45.4 (r420671)
[ 20.741014@1] Firmware: wl0: Dec 10 2012 15:10:32 version 5.90.195.89.1_edon/off_0xb8bf FWID 01-0
[ 20.742477@1] wl_android_wifi_on: Success
[ 20.774375@1] dhd_open: Exit ret=0
[ 21.001166@0] device wlan0 entered promiscuous mode
[ 21.001508@0] br0: port 1(wlan0) entered forwarding state
[ 21.001527@0] br0: port 1(wlan0) entered forwarding state
[ 21.013629@0] Disconnect STA : ff:ff:ff:ff:ff:ff scb_val.val 3
[ 21.024509@0] netdev_ifidx(3), chan_type(1) target channel(6)
[ 21.113104@0] CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
[ 21.113117@0] CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
[ 21.219350@1] unionfs: new lower inode mtime (bindex=1, name=var)
[ 21.537484@1] unionfs: new lower inode mtime (bindex=1, name=log)
[ 21.798217@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 0, master_no(1) 300K addr 0xc
[ 21.798298@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0xc
[ 21.798601@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 0, master_no(1) 300K addr 0xc
[ 21.798648@0] i2c i2c-1: i2c wr failed=-11
[ 21.907339@0] i2c i2c-1: Uploading demod firmware (dvb-fe-avl6211.fw)...
[ 22.107622@1] unionfs: new lower inode mtime (bindex=1, name=usr)
[ 22.107675@1] unionfs: new lower inode mtime (bindex=1, name=lib)
[ 22.772030@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 22.957646@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 22.957708@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 23.008681@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 23.032588@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 23.340603@0] i2c i2c-1: AVL6211+AV2011 init OK
[ 23.367996@0] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1329000 symbol_rate=22000000
[ 23.368492@1] wetek-dvb dvb.8: start_feed_dmx0
[ 23.368505@1] wetek-dvb dvb.8: FLUSH FIFO0
[ 23.368512@1] wetek-dvb dvb.8: FLUSH ok
[ 23.368520@1] wetek-dvb dvb.8: FIFO0<->0
[ 23.427041@0] i2c i2c-1: BF is 110,BW is 18198
[ 23.518012@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 23.887351@0] i2c i2c-1: Tuner successfully lock!
[ 24.348745@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 24.823087@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 24.837758@1] unionfs: new lower inode mtime (bindex=1, name=xml)
[ 24.937982@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 24.948126@1] unionfs: new lower inode mtime (bindex=1, name=email)
[ 25.050999@1] unionfs: new lower inode mtime (bindex=1, name=xml)
[ 25.625524@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 25.663064@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 25.684996@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 25.768246@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 25.930419@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 25.939363@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 26.100399@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 26.192662@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 26.277353@1] unionfs: new lower inode mtime (bindex=1, name=webassets)
[ 26.390867@1] unionfs: new lower inode mtime (bindex=1, name=filter)
[ 26.498486@1] unionfs: new lower inode mtime (bindex=1, name=filter)
[ 26.557547@1] unionfs: new lower inode mtime (bindex=1, name=filter)
[ 27.098031@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 27.282698@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 27.317285@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
[ 27.609430@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 27.746907@1] unionfs: new lower inode mtime (bindex=1, name=mako)
[ 27.782279@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 28.038778@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 28.052686@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 28.178785@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 28.182310@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 28.187884@1] unionfs: new lower inode mtime (bindex=1, name=migrations)
[ 28.200109@1] unionfs: new lower inode mtime (bindex=1, name=migrations)
[ 28.415276@1] unionfs: new lower inode mtime (bindex=1, name=plugins)
[ 28.427642@1] unionfs: new lower inode mtime (bindex=1, name=plugins)
[ 28.435892@1] unionfs: new lower inode mtime (bindex=1, name=plugins)
[ 28.526895@1] unionfs: new lower inode mtime (bindex=1, name=plugins)
[ 28.549987@1] unionfs: new lower inode mtime (bindex=1, name=plugins)
[ 28.598659@1] unionfs: new lower inode mtime (bindex=1, name=plugins)
[ 28.696854@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
[ 28.729905@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 28.873951@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
[ 36.037184@0] br0: port 1(wlan0) entered forwarding state
[ 314.954688@0] wl_notify_connect_status_ap: connected device e0:06:e6:c3:cb:2d
[ 330.912133@1] unionfs: new lower inode mtime (bindex=1, name=core)
[ 330.913907@1] unionfs: new lower inode mtime (bindex=1, name=backends)
[ 706.227631@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1721000 symbol_rate=27500000
[ 706.287022@1] i2c i2c-1: BF is 134,BW is 22206
[ 706.767740@0] i2c i2c-1: Tuner successfully lock!
[ 707.817899@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1721000 symbol_rate=27500000
[ 707.877030@1] i2c i2c-1: BF is 134,BW is 22206
[ 708.378144@1] i2c i2c-1: Tuner successfully lock!
[ 709.428192@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1721000 symbol_rate=27500000
[ 709.487550@1] i2c i2c-1: BF is 134,BW is 22206
[ 709.987851@1] i2c i2c-1: Tuner successfully lock!
[ 711.067900@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1721000 symbol_rate=27500000
[ 711.127030@1] i2c i2c-1: BF is 134,BW is 22206
[ 711.607562@1] i2c i2c-1: Tuner successfully lock!
[ 712.658295@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1721000 symbol_rate=27500000
[ 712.717526@1] i2c i2c-1: BF is 134,BW is 22206
[ 713.217559@1] i2c i2c-1: Tuner successfully lock!
[ 714.288447@0] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1721000 symbol_rate=27500000
[ 714.347941@0] i2c i2c-1: BF is 134,BW is 22206
[ 714.847571@1] i2c i2c-1: Tuner successfully lock!
[ 808.064027@0] wl_notify_connect_status_ap: deauthenticated device e0:06:e6:c3:cb:2d
[ 808.065082@0] Disconnect STA : e0:06:e6:c3:cb:2d scb_val.val 3
[ 1249.952933@0] Uart 0 Driver: Framing Error while receiving a character
[ 1249.969570@0] Uart 0 Driver: Framing Error while receiving a character
[ 1249.986281@0] Uart 0 Driver: Framing Error while receiving a character
[ 1250.002903@0] Uart 0 Driver: Framing Error while receiving a character
[ 1250.019574@0] Uart 0 Driver: Framing Error while receiving a character
[ 1302.965186@0] Uart 0 Driver: Framing Error while receiving a character
[ 1302.981703@0] Uart 0 Driver: Framing Error while receiving a character
[ 1302.998468@0] Uart 0 Driver: Framing Error while receiving a character
[ 1303.015034@0] Uart 0 Driver: Framing Error while receiving a character
[ 1478.806783@1] unionfs: new lower inode mtime (bindex=1, name=home)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment