Skip to content

Instantly share code, notes, and snippets.

@booo

booo/openwrt-initramfs-bootlog.txt

Created February 11, 2014 11:21
Show Gist options
  • Save booo/8933099 to your computer and use it in GitHub Desktop.
Save booo/8933099 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
openwrt-initramfs-bootlog.txt
Netgear # tftp 2800000 openwrt-octeon-vmlinux-initramfs.elf;bootoctlinux 2800000
Using octeth0 device
TFTP from server 192.168.0.23; our IP address is 192.168.0.1
Filename 'openwrt-octeon-vmlinux-initramfs.elf'.
Load address: 0x2800000
Loading: #################################################################
############
done
Bytes transferred = 10650760 (a28488 hex)
ELF file is 64 bit
Allocated memory for ELF segment: addr: 0x1100000, size 0xa68458
Loading .text @ 0x81100000 (0x2f558c bytes)
Loading __ex_table @ 0x813f5590 (0x57e0 bytes)
Loading .rodata @ 0x813fb000 (0x98860 bytes)
Loading .pci_fixup @ 0x81493860 (0x17b8 bytes)
Loading __ksymtab @ 0x81495018 (0xb310 bytes)
Loading __ksymtab_gpl @ 0x814a0328 (0x50c0 bytes)
Loading __ksymtab_strings @ 0x814a53e8 (0x1220a bytes)
Loading __param @ 0x814b75f8 (0x820 bytes)
Clearing __modver @ 0x814b7e18 (0x1e8 bytes)
Loading .data @ 0x814b8000 (0x3c910 bytes)
Loading .init.text @ 0x814f5000 (0x26310 bytes)
Loading .init.data @ 0x8151b320 (0x5f9590 bytes)
Loading .data..percpu @ 0x81b15000 (0x2f00 bytes)
Clearing .bss @ 0x81b20000 (0x48458 bytes)
## Loading Linux kernel with entry point: 0x81106410 ...
Bootloader: Done loading app on coremask: 0x1
[ 0.000000] Linux version 3.10.28 (borgers@t60) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39555) ) #2 SMP Mon Feb 10 17:09:24
[ 0.000000] Skipping L2 locking due to reduced L2 cache size
[ 0.000000] CVMSEG size: 2 cache lines (256 bytes)
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 000d0212 (Cavium Octeon)
[ 0.000000] Checking for the multiply/shift bug... no.
[ 0.000000] Checking for the daddiu bug... no.
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 0000000002400000 @ 0000000001c00000 (usable)
[ 0.000000] memory: 0000000000a68458 @ 0000000001100000 (usable)
[ 0.000000] Wasting 243712 bytes for tracking 4352 unused pages
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Using internal Device Tree.
[ 0.000000] software IO TLB [mem 0x01f88000-0x01fc8000] (0MB) mapped at [a800000001f88000-a800000001fc7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x01100000-0xefffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x01100000-0x01b67fff]
[ 0.000000] node 0: [mem 0x01c00000-0x03ffffff]
[ 0.000000] Primary instruction cache 16kB, virtually tagged, 2 way, 64 sets, linesize 128 bytes.
[ 0.000000] Primary data cache 8kB, 64-way, 1 sets, linesize 128 bytes.
[ 0.000000] PERCPU: Embedded 10 pages/cpu @a800000001fd5000 s12032 r8192 d20736 u40960
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 11715
[ 0.000000] Kernel command line: bootoctlinux 2800000 console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 32800k/47520k available (3029k kernel code, 14720k reserved, 1020k data, 6316k init, 0k highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:127
[ 0.230874] Calibrating delay loop (skipped) preset value.. 600.00 BogoMIPS (lpj=1200000)
[ 0.238918] pid_max: default: 32768 minimum: 301
[ 0.243914] Mount-cache hash table entries: 256
[ 0.250222] Checking for the daddi bug... no.
[ 0.257055] Brought up 1 CPUs
[ 0.267316] NET: Registered protocol family 16
[ 0.275014] Not in host mode, PCI Controller not initialized
[ 0.322259] bio: create slab <bio-0> at 0
[ 0.330594] SCSI subsystem initialized
[ 0.337438] usbcore: registered new interface driver usbfs
[ 0.343687] usbcore: registered new interface driver hub
[ 0.349823] usbcore: registered new device driver usb
[ 0.358569] Switching to clocksource OCTEON_CVMCOUNT
[ 0.373589] NET: Registered protocol family 2
[ 0.379405] TCP established hash table entries: 512 (order: 1, 8192 bytes)
[ 0.386316] TCP bind hash table entries: 512 (order: 2, 16384 bytes)
[ 0.392633] TCP: Hash tables configured (established 512 bind 512)
[ 0.398894] TCP: reno registered
[ 0.402100] UDP hash table entries: 256 (order: 2, 24576 bytes)
[ 0.408037] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[ 0.415057] NET: Registered protocol family 1
[ 0.646638] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.652591] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.663039] msgmni has been set to 64
[ 0.669001] io scheduler noop registered
[ 0.672867] io scheduler deadline registered (default)
[ 0.678881] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.689490] octeon_rng octeon_rng: Octeon Random Number Generator
[ 0.702208] of-flash 1f400000.nor: Can't get bank width from device tree
[ 0.710689] libphy: mdio-octeon: probed
[ 0.716509] mdio_bus 9001180000001800: cannot get PHY at address 9
[ 0.722687] mdio-octeon 1180000001800.mdio: Version 1.0
[ 0.729984] usbcore: registered new interface driver usb-storage
[ 0.736031] octeon_wdt: Initial granularity 5 Sec
[ 0.741621] cavium-ethernet 1.9
[ 0.749937] Interface 0 has 2 ports (GMII)
[ 0.773300] OcteonUSB OcteonUSB.0: Octeon Host Controller
[ 0.778684] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
[ 0.786115] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
[ 0.793820] hub 1-0:1.0: USB hub found
[ 0.797692] hub 1-0:1.0: 1 port detected
[ 0.803111] TCP: cubic registered
[ 0.806383] NET: Registered protocol family 17
[ 0.812041] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 34) is a OCTEON
�[ 0.819958] console [ttyS0] enabled, bootconsole disabled
[ 0.819958] console [ttyS0] enabled, bootconsole disabled
[ 0.832852] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 35) is a OCTEON
[ 0.842446] Bootbus flash: Setting flash for 16MB flash at 0x1ec00000
[ 0.849206] phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[ 0.859807] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.865051] Amd/Fujitsu Extended Query version 1.3.
[ 0.870186] number of CFI chips: 1
[ 0.893628] Freeing unused kernel memory: 6316K (ffffffff814f5000 - ffffffff81b20000)
procd: Console is alive
procd: - watchdog -
procd: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 2.687715] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 4.307737] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[ 5.931855] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 7.204135] NET: Registered protocol family 10
[ 7.222299] nf_conntrack version 0.5.0 (305 buckets, 1220 max)
[ 7.239055] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.271232] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
[ 7.279369] Backport generated by backports.git backports-20140124-0-g1256d3e
[ 7.443254] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.512486] xt_time: kernel timezone is -0000
[ 7.548192] cfg80211: Calling CRDA to update world regulatory domain
[ 7.563818] cfg80211: World regulatory domain updated:
[ 7.569160] cfg80211: DFS Master region: unset
[ 7.573661] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.582142] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.589979] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.597815] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.605648] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 7.613484] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 7.621318] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 7.688072] PPP generic driver version 2.4.2
[ 7.703603] NET: Registered protocol family 24
[ 7.720373] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 7.727586] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 12.437187] device eth1 entered promiscuous mode
[ 12.468054] br-lan: port 1(eth1) entered forwarding state
[ 12.473662] br-lan: port 1(eth1) entered forwarding state
[ 12.550897] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.716430] ip_tables: iptables: loop hook 1 pos 7328 00000022.
[ 13.739206] ip_tables: iptables: loop hook 0 pos 4544 00000021.
[ 13.773647] ip_tables: iptables: loop hook 0 pos 0 00000021.
[ 13.797060] ip_tables: iptables: loop hook 0 pos 960 0295F0A1.
procd: - init complete -
BusyBox v1.19.4 (2014-02-10 16:48:19 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r39555)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment