Custom gearing for Alfa Romeo 33 Stradale in Assetto Corsa

drivetrain.ini

; Modified drivetrain.ini file for Assetto Corsa Alfa Romeo 33 Stradale
; (ks_alfa_33_stradale). Recommend you use the app Assetto Corsa Car Tuner to
; make a tuned clone of the base car, then copy/paste over the drivetrain.ini
; file in the cloned version.

[HEADER]
VERSION=3

[TRACTION]
TYPE=RWD                ; Wheel drive. Possible options: FWD (Front Wheel Drive), RWD (Rear Wheel Drive)

[GEARS]
COUNT=6                 ; forward gears number
GEAR_R=-3.273             ; rear gear ratio
; forward gears ratios. must be equal to number of gears defined on count
GEAR_1=3.250
GEAR_2=2.507
GEAR_3=1.920
GEAR_4=1.547
GEAR_5=1.254
GEAR_6=1.027

FINAL=4.23                ; final gear ratio
; GEAR_1=3.25   
; GEAR_2=2.18   
; GEAR_3=1.60 
; GEAR_4=1.30
; GEAR_5=1.12
; GEAR_6=0.96
; FINAL=3.81                ; final gear ratio

[DIFFERENTIAL]
POWER=0.25                ; differential lock under power. 1.0=100% lock - 0 0% lock
COAST=0.25                ; differential lock under coasting. 1.0=100% lock 0=0% lock
PRELOAD=5               ; preload torque setting

[GEARBOX]
CHANGE_UP_TIME=100            ; change up time in milliseconds
CHANGE_DN_TIME=150            ; change down time in milliseconds
AUTO_CUTOFF_TIME=130          ; Auto cutoff time for upshifts in milliseconds, 0 to disable
SUPPORTS_SHIFTER=1            ; 1=Car supports shifter, 0=car supports only paddles
VALID_SHIFT_RPM_WINDOW=1000       ;range window additional to the precise rev matching rpm that permits gear engage.
CONTROLS_WINDOW_GAIN=0.4        ;multiplayer for gas,brake,clutch pedals that permits gear engage on different rev matching rpm. the lower the more difficult.
INERTIA=0.018             ; gearbox inertia. default values to 0.02 if not set

[CLUTCH]
MAX_TORQUE=400              ; Clutch torque 

[AUTOCLUTCH]
UPSHIFT_PROFILE=NONE          ; Name of the autoclutch profile for upshifts. NONE to disable autoclutch on shift up
DOWNSHIFT_PROFILE=DOWNSHIFT_PROFILE   ; Same as above for downshifts
USE_ON_CHANGES=0            ; Use the autoclutch on gear shifts even when autoclutch is set to off. Needed for cars with semiautomatic gearboxes. values 1,0
MIN_RPM=1150              ; Minimum rpm for autoclutch engadgement
MAX_RPM=1650              ; Maximum rpm for autoclutch engadgement
FORCED_ON=0

[UPSHIFT_PROFILE]
POINT_0=30                ; Time to reach fully depress clutch
POINT_1=80                ; Time to start releasing clutch
POINT_2=100               ; Time to reach fully released clutch

[DOWNSHIFT_PROFILE]
POINT_0=10                ; Time to reach fully depress clutch
POINT_1=90                ; Time to start releasing clutch
POINT_2=180               ; Time to reach fully released clutch

[AUTOBLIP]
ELECTRONIC=0              ; If =1 then it is a feature of the car and cannot be disabled
POINT_0=10                ; Time to reach full level
POINT_1=150               ; Time to start releasing gas
POINT_2=180               ; Time to reach 0 gas
LEVEL=0.7               ; Gas level to be reached

[DAMAGE]
RPM_WINDOW_K=100

[AUTO_SHIFTER]
UP=9000
DOWN=6000
SLIP_THRESHOLD=1.05
GAS_CUTOFF_TIME=0.320