Last active
October 22, 2023 12:32
-
-
Save braian87b/821e9e4f399918510c55619192a31871 to your computer and use it in GitHub Desktop.
How to setup Client Bridged / Client Mode / RelayD and IGMPProxy for OpenWRT / LEDE
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Client Bridged / Client Mode / RelayD and IGMPProxy (It works) | |
| # RelayD is to redirect packages and IGMP is for redirect IGMP packages | |
| # Our network is 192.168.1.0/24 | |
| # Steps: | |
| # Configure WAN as static | |
| # We should edit our wan iface and put static IP | |
| uci set network.wan='interface' | |
| uci set network.wan.proto='static' | |
| uci set network.wan.ipaddr='192.168.1.239' # Main Network IP | |
| uci set network.wan.netmask='255.255.255.0' | |
| uci set network.wan.gateway='192.168.1.1' # Main Network Gateway | |
| uci set network.wan.dns='192.168.1.1' # Temporary, to have internet here | |
| # Disable physical WAN | |
| # If we want to avoid conflicts if we connect something by mistake on wan port (we could disable it) | |
| uci del network.wan.ifname | |
| # Put temporarely LAN on another network | |
| uci set network.lan.ipaddr='192.168.11.1' # FAKE IP (recommended to be in another never to be used subnet) | |
| uci set network.lan.netmask='255.255.255.0' | |
| # Now we must change our computer IP to this range to be able to connect to it | |
| # We will get internet using WAN (WiFi) now | |
| uci del network.lan.gateway | |
| uci del network.lan.dns | |
| # 4) Setup Wireless connection Client | |
| uci set wireless.@wifi-iface[-1].device='radio0' | |
| uci set wireless.@wifi-iface[-1].network='wan' | |
| uci set wireless.@wifi-iface[-1].mode='sta' | |
| uci set wireless.@wifi-iface[-1].ssid='Wireless name SSID' | |
| # use 'psk' if WPA, or 'psk2' if WPA2 | |
| uci set wireless.@wifi-iface[-1].encryption='psk2' | |
| uci set wireless.@wifi-iface[-1].key='Wireless Password' | |
| uci commit | |
| wifi | |
| # We disable Firewall | |
| echo '' > /etc/config/firewall | |
| /etc/init.d/firewall disable | |
| /etc/init.d/firewall stop | |
| # Apply Changes | |
| uci commit | |
| sync | |
| /etc/init.d/network restart | |
| # Now we must change our IP to 192.168.11.x and reconnect to 192.168.11.1 | |
| # We should have now network (with internet) | |
| opkg update | |
| # Verify free space | |
| #root@OpenWrt:~# df | grep overlayfs | |
| #overlayfs:/overlay 896 216 680 24% / | |
| # Download relayd and igmpproxy (see used space) | |
| opkg install relayd igmpproxy | |
| #root@OpenWrt:~# df | grep overlayfs | |
| #overlayfs:/overlay 896 248 648 28% / | |
| # | |
| #OK #uci set network.lan.ipaddr='192.168.11.1' # Already done | |
| #OK #uci set network.lan.netmask='255.255.255.0' # Already done | |
| uci set network.lan.gateway='192.168.1.1' # Main Network Gateway | |
| uci set network.lan.dns='192.168.1.1' # Main Network DNS | |
| #OK #uci set network.wan.ipaddr='192.168.1.239' # Already done | |
| #OK #uci set network.wan.netmask='255.255.255.0' # Already done | |
| #OK #uci set network.wan.gateway='192.168.1.1' # Already done | |
| uci del network.wan.dns # DNS goes in 'lan' now | |
| # We configure interface for relayd | |
| uci set network.stabridge='interface' | |
| uci set network.stabridge.proto='relay' | |
| uci set network.stabridge.network="lan wan" | |
| uci set network.stabridge.ipaddr="`uci get network.wan.ipaddr`" # Needed to be able to access this Router | |
| /etc/init.d/relayd enable | |
| /etc/init.d/relayd start | |
| # We Configure igmpproxy | |
| uci set igmpproxy.@phyint[0].network='wan' | |
| uci set igmpproxy.@phyint[0].altnet='192.168.0.0/24' | |
| uci set igmpproxy.@phyint[1].network='lan' | |
| uci set igmpproxy.@phyint[1].altnet='192.168.0.0/24' | |
| /etc/init.d/igmpproxy enable | |
| /etc/init.d/igmpproxy start | |
| # We Disable DNSMasq | |
| echo '' > /etc/config/dhcp | |
| /etc/init.d/dnsmasq disable # to avoid edits to /etc/resolv.conf | |
| /etc/init.d/dnsmasq stop | |
| # Commit Changes, Save and Reboot | |
| uci commit | |
| sync | |
| reboot | |
| # Optionally we could add new wifi-iface in AP mode with network='lan' | |
| uci add wireless wifi-iface | |
| uci set wireless.@wifi-iface[-1].device='radio0' | |
| uci set wireless.@wifi-iface[-1].network='lan' | |
| uci set wireless.@wifi-iface[-1].mode='ap' | |
| uci set wireless.@wifi-iface[-1].ssid='WiFi Network' | |
| uci set wireless.@wifi-iface[-1].encryption='psk2+aes' | |
| uci set wireless.@wifi-iface[-1].key='Wireless Password' | |
| uci commit wireless && wifi reload | |
| # How to setup a Dumb AP, Wired backbone for OpenWRT / LEDE | |
| https://gist.github.com/braian87b/bba9da3a7ac23c35b7f1eecafecdd47d | |
| # How to setup Wireless Links to avoid Wired backbone using WDS on Atheros for OpenWRT / LEDE | |
| https://gist.github.com/braian87b/8a524a8ad74a36407a8f481e9d16a5c9 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
It's confusing me, that you igmpproxy-config the up/downstream altnet as a C-Class local-subnet, and even one different from your main-subnet 192.168.1.0
We Configure igmpproxy
uci set igmpproxy.@phyint[0].network='wan'
uci set igmpproxy.@phyint[0].altnet='192.168.0.0/24'
uci set igmpproxy.@phyint[1].network='lan'
uci set igmpproxy.@phyint[1].altnet='192.168.0.0/24'
and don't you also have to add the role upstream/downstream?