Xen/XCP-ng script to attach physical USB devices via passthrough to a VM

README.md

XCP-ng USB passthrough tools

A set of command line tools and a service to make setting up passthrough USB devices easier:

• add-custom-usb-policies - script to store and apply custom USB policies required for specific devices
• attach-usb-devices - script and service to automatically connect USB devices to VMS when XCP-ng boots up
• plug-usb - attach a physical USB device to a VM in one command
• unplug-usb - remove a physical USB device from a VM in one command

To set up, copy the files onto your server and run install.sh to copy everything and set up the service. You can add any plug-usb commands you want to run on boot by modifying /usr/bin/attach-usb-devices. You can add any custom USB policies you need applied on install or after updates by modifying add-custom-usb-policies before running install.sh.

You can also use plug-usb directly if you want to attach a new device on demand:

# You can use xe vusb-list and xe vm-list to figure out the IDs you need
plug-usb <vusb-uuid> <vm-uuid>

If you want to unplug a device later, you can use unplug-usb:

unplug-usb <vusb-uuid>

You can list all physical USB devices available and get their UUIDs with xe pusb-list.

If you customise add-custom-usb-policies, you can run it again after upgrades to ensure your custom policies are applied again.

add-custom-usb-policies

#!/bin/bash

# find information about which device you want to add a policy for with:
# lsusb
#     Bus 001 Device 049: ID 1cf1:0030 Dresden Elektronik
# =>
# ALLOW:vid=1cf1 pid=0030 # Dresden Elektronik

# add the following policies to usb-policy.conf if they don't already exist
USB_POLICY_DRESDEN="ALLOW:vid=1cf1 pid=0030 # Dresden Elektronik"
USB_POLICY_BLUETOOTH="ALLOW:vid=0b05 pid=190e # Asus USB-BT500"

POLICY_FILE="/etc/xensource/usb-policy.conf"

for POLICY in "${USB_POLICY_DRESDEN}" "${USB_POLICY_BLUETOOTH}"; do
  # -q be quiet
  # -x match the whole line
  # -F pattern is a plain string
  grep -xqF -- "$POLICY" "$POLICY_FILE" || sed -i "1s/^/${POLICY}\n/" "$POLICY_FILE"
done

# NOTE: assumes you only have one host...
xe pusb-scan host-uuid=$(xe host-list --minimal)

attach-usb-devices

#!/bin/bash

function get-vm-uuid-by-name() {
  vm_name="$1"
  xe vm-list name-label="$vm_name" --minimal
}

function get-usb-uuid-by() {
  key="$1"
  value="$2"
  xe pusb-list $key="$value" --minimal
}

# Below list all the connections you want made automatically on boot

# The name here ("Example Disk Name") is the pusb product-desc,
# which you can find with: xe pusb-list params=uuid,product-desc

plug-usb "`get-usb-uuid-by product-desc "Example Disk Name"`" "`get-vm-uuid-by-name "Some VM Name"`"

attach-usb-devices.service

[Unit]
Description=Automatically attach USB devices on startup
Wants=xapi-init-complete.target
# Runs BEFORE xapi-domains.service which is when VMS are autostarted
Before=xapi-domains.service
After=remote-fs.target xapi-init-complete.target xapi.service

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/attach-usb-devices

[Install]
WantedBy=multi-user.target

install.sh

#/bin/bash

cp attach-usb-devices plug-usb unplug-usb add-custom-usb-policies /usr/bin
chmod +x /usr/bin/attach-usb-devices /usr/bin/plug-usb /usr/bin/unplug-usb /usr/bin/add-custom-usb-policies

cp attach-usb-devices.service /etc/systemd/system
systemctl enable attach-usb-devices

add-custom-usb-policies

# You can try running systemctl start attach-usb-devices but it'll fail to attach any VMs that are already running.

plug-usb

#!/bin/bash

pusb_uuid="$1"
vm_uuid="$2"

if [ -z "$pusb_uuid" ] || [ -z "$vm_uuid" ]; then
  echo "Usage: plug-usb <pusb-device-uuid> <vm-uuid>"
  exit 1
fi

vm_name=`xe vm-list uuid="$vm_uuid" | grep name-label | sed -E 's/^.*: //g'`
pusb_name=`xe pusb-list uuid="$pusb_uuid" | grep product-desc | sed -E 's/^.*: //g'`

if ! [ -z "`xe vm-list uuid="$vm_uuid" power-state=running`" ]; then
  echo "VM $vm_name must be stopped first."
  exit 1
fi


echo -n "Attaching $pusb_name ($pusb_uuid) to $vm_name ($vm_uuid)..."
group_uuid=`xe usb-group-list PUSB-uuids="$pusb_uuid" --minimal`
xe pusb-param-set uuid="$pusb_uuid" passthrough-enabled=true
if [ -z "`xe vusb-list vm-uuid="$vm_uuid" usb-group-uuid="$group_uuid"`" ]; then
  xe vusb-create usb-group-uuid="$group_uuid" vm-uuid="$vm_uuid" > /dev/null
  if [ $? -eq 0 ]; then
    echo "Attached"
  else
    echo "Failed."
  fi
else
  echo "Already attached."
fi

unplug-usb

#!/bin/bash

pusb_uuid="$1"

if [ -z "$pusb_uuid" ]; then
  echo "Usage: usb-unplug <pusb-uuid>"
  exit 1
fi

group_uuid=`xe usb-group-list PUSB-uuids="$pusb_uuid" --minimal`

if [ -z "$group_uuid" ]; then
  echo "Could not find USB group."
  exit 1
fi

vusb_uuid=`xe vusb-list usb-group-uuid="$group_uuid" --minimal`

if [ -z "$vusb_uuid" ]; then
  echo "Failed to find virtual USB."
  exit 1
fi

# Unplug from running VM
vm_uuid=`xe vusb-list usb-group-uuid="$group_uuid" | grep vm-uuid | sed -E 's/^.*: //g'`
if ! [ -z "`xe vm-list uuid="$vm_uuid" power-state=running`" ]; then
  xe vusb-unplug uuid="$vusb_uuid"
fi

xe vusb-destroy uuid="$vusb_uuid"

xe pusb-param-set uuid="$pusb_uuid" passthrough-enabled=false