brandonros/stm32f407g-disc1-dfu-mode.md

Last active August 28, 2024 17:30

Star () You must be signed in to star a gist
Fork () You must be signed in to fork a gist

Learn more about clone URLs
Clone this repository at <script src="https://gist.github.com/brandonros/cbefabcc9c99e6f1c868f65b2cfc9129.js"></script>
Save brandonros/cbefabcc9c99e6f1c868f65b2cfc9129 to your computer and use it in GitHub Desktop.

STM32F407G-DISC1/STM32F4DISCOVERY DFU mode

Raw

    Take every jumper off except JP1. Take both jumpers off CN3. Take the jumpers JP2 and JP3 off from the bottom of the board.
Put a jumper between BOOT0 and VDD.
Connect with a wire PA9 to 5V.
Connect the device using the micro USB port, not the mini-USB port.
sudo dfu-util -d 0483:df11 -a 0 -s 0x08000000 -D build/Example_Project.bin
Unplug the device.
Disconnect the BOOT0 jumper.
Plug the device in.


  

dmitriirylko commented Jan 9, 2024

I managed to load firmware with DFU to my Discovery board from STM32CubeProgrammer on my Linux machine after following commands:
sudo apt-get install libusb-1.0-0
cd /usr/local/STMicroelectronics/STM32Cube/STM32CubeProgrammer/Drivers/rules (I guess, path can be different)
sudo cp . /etc/udev/rules.d/