brooksware2000’s gists

brooksware2000 / jingle_bells.cc

Created November 16, 2017 03:17 — forked from elubow/jingle_bells.cc

Using a Piezo Element and Arduino, you can play jingle bells using this code sample.

	int speakerPin = 5;
	int length = 26;
	char notes[] = "eeeeeeegcde fffffeeeeddedg";
	int beats[] = { 1, 1, 2, 1, 1, 2, 1, 1, 1, 1, 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2};

	int tempo = 300;
	void playTone(int tone, int duration) {
	for (long i = 0; i < duration * 1000L; i += tone * 2) {
	digitalWrite(speakerPin, HIGH);
	delayMicroseconds(tone);

brooksware2000 / Serial_ISR.pbp

Created November 25, 2012 19:20

LCD serial interrupt initialization and ISR routine

	;Enable unmasked peripheral interrupts
	INTCON = %11000000

	;Declear interrupt handler
	ON INTERRUPT goto Serial_Interrupt

	;Enable interrupt on USART (Serial Receive)
	PIE1.5 = 1

	...

brooksware2000 / LCD_2_1.pbp

Created November 25, 2012 19:07

Header file and defines for Serial LCD Controller

	;-----[ Includes ]---------------------------------------------------------
	INCLUDE "16F628A.pbp"


	;-----[ Defines ]----------------------------------------------------------
	;Define oscillator speed in Mhz
	DEFINe OSC 20

	;Define which port is connected to the LCD Data pins D4 - D7
	DEFINE LCD_DREG PORTB

brooksware2000 / Serial_Sensor_Demo2.ino

Created September 6, 2012 21:58

Sends sensor data and relay status from the thermostat/temperature node over the serial port.

	/*
	Demonstration sketch for the Hobbybotics Wireless Thermostat/Temperature Node.

	Sends sensor data and relay status over the serial port.
	*/

	#include <MCP23008.h> // MCP23008 I/O Expander (I2C)
	#include <LCD.h> // I2C LCD
	#include <Wire.h> // I2C functions
	#include <OneWire.h> // One-wire devices

brooksware2000 / LCD_relay_Demo3.ino

Created September 6, 2012 00:27

Example menu and relay control sketch for the Wireless Thermostat/Temperature board

	/*
	Demonstration sketch for the Hobbybotics Wireless Thermostat/Temperature Node.

	Creates a LCD menu system and allows ON/OFF control for the relays on the System
	Output Controller board.

	Sections of code that is not needed for this demonstration is commented out
	*/

	#include <MCP23008.h> // MCP23008 I/O Expander (I2C)

brooksware2000 / DS3234_LCD_demo2.ino

Created September 5, 2012 04:24

Example sketch for the DS3234 SPI Real Time Clock (RTC). Prints results to an I2C LCD.

	/*
	Demonstration sketch for Hobbybotics Wireless Thermostat/Temperature Node V2.0 using DS3234 RTC.

	Reads Date and Time. Displays results to LCD
	*/

	#include <SPI.h>
	#include <Wire.h>
	#include <RTClib.h>
	#include <DS3234.h>

brooksware2000 / LCD_TEMT6000_demo.ino

Created September 5, 2012 04:06

Test sketch for the TEMT6000 light sensor

	/*
	Demonstration sketch for TEMT6000 light sensor.

	Reads light level (lux) and prints results to I2C LCD.
	*/

	#include <TEMT6000.h>
	#include <LCD.h>
	#include <Wire.h>

brooksware2000 / DS18B20_LCD_demo.ino

Created September 5, 2012 00:46

Example sketch for DS18B20 temperature sensors using the DallasTemperature library. Prints results to an I2C LCD.

	/*
	Demonstration sketch for DS18B20 temperature sensors using the DallasTemperature library.

	Reads temperature (Celsius) and temperature (Fahrenheit). Displays results to I2C LCD.
	*/

	#include <LCD.h> // I2C LCD
	#include <Wire.h> // I2C
	#include <OneWire.h> // One-wire devices
	#include <DallasTemperature.h> // DS18B20

brooksware2000 / SHT15_LCD.ino

Created September 5, 2012 00:14

Test sketch for the SHT15 humidity/temperature sensor

	/*
	Demonstration sketch for Hobbybotics SHT1x humidity/temperature sensor
	breakout V1.o.

	Reads humidity, temperature (Celsius) and temperature (Fahrenheit).
	Displays results to LCD.
	*/

	#include <LCD.h>
	#include <SHT15.h>

brooksware2000 / MAX6675_LCD.ino

Created September 5, 2012 00:05

Test sketch for the MAX6675 Type-K Thermocouple Breakout

	/*
	Demonstration sketch for Hobbybotics MAX6675 Thermocouple breakout board.

	Reads temperature from MAX6675 in celsius and fahrenheit. Prints results to I2C LCD.
	*/

	#include <MAX6675.h>
	#include <LCD.h>
	#include <Wire.h>

Curtis Brooks brooksware2000