Last active
October 24, 2024 21:43
-
-
Save bskaggs/fc3c8d0d553be54e2645616236fdc8c6 to your computer and use it in GitHub Desktop.
Install pyarrow on alpine in docker
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| FROM python:3.7-alpine3.8 | |
| RUN apk add --no-cache \ | |
| build-base \ | |
| cmake \ | |
| bash \ | |
| jemalloc-dev \ | |
| boost-dev \ | |
| autoconf \ | |
| zlib-dev \ | |
| flex \ | |
| bison | |
| RUN pip install --no-cache-dir six pytest numpy cython | |
| RUN pip install --no-cache-dir pandas | |
| ARG ARROW_VERSION=0.12.0 | |
| ARG ARROW_SHA1=2ede75769e12df972f0acdfddd53ab15d11e0ac2 | |
| ARG ARROW_BUILD_TYPE=release | |
| ENV ARROW_HOME=/usr/local \ | |
| PARQUET_HOME=/usr/local | |
| #Download and build apache-arrow | |
| RUN mkdir /arrow \ | |
| && apk add --no-cache curl \ | |
| && curl -o /tmp/apache-arrow.tar.gz -SL https://github.com/apache/arrow/archive/apache-arrow-${ARROW_VERSION}.tar.gz \ | |
| && echo "$ARROW_SHA1 *apache-arrow.tar.gz" | sha1sum /tmp/apache-arrow.tar.gz \ | |
| && tar -xvf /tmp/apache-arrow.tar.gz -C /arrow --strip-components 1 \ | |
| && mkdir -p /arrow/cpp/build \ | |
| && cd /arrow/cpp/build \ | |
| && cmake -DCMAKE_BUILD_TYPE=$ARROW_BUILD_TYPE \ | |
| -DCMAKE_INSTALL_LIBDIR=lib \ | |
| -DCMAKE_INSTALL_PREFIX=$ARROW_HOME \ | |
| -DARROW_PARQUET=on \ | |
| -DARROW_PYTHON=on \ | |
| -DARROW_PLASMA=on \ | |
| -DARROW_BUILD_TESTS=OFF \ | |
| .. \ | |
| && make -j$(nproc) \ | |
| && make install \ | |
| && cd /arrow/python \ | |
| && python setup.py build_ext --build-type=$ARROW_BUILD_TYPE --with-parquet \ | |
| && python setup.py install \ | |
| && rm -rf /arrow /tmp/apache-arrow.tar.gz |
I think necessary
I can't make this work either. If someone has knowledge about what the underlying problem is I will gladly put in some time and effort and try to make this work. Unfortunately, my knowledge about this thus far is quite limited. I would really like to work with the Alpine base image as it is a safe and small starting point. I am using
python:3.11-alpineas a base.I've managed to build pyarrow with apache arrow finally, but the resulted image is 3,5GB And building lasts about 30 min. Here is the confirmed docker file:
FROM --platform=linux/amd64 python:3.12-alpine AS base # Setup env ENV LANG=C.UTF-8 ENV LC_ALL=C.UTF-8 ENV PYTHONDONTWRITEBYTECODE=1 ENV PYTHONFAULTHANDLER=1 ENV ACCEPT_EULA=Y RUN apk update && apk add --no-cache \ gcc \ g++ \ curl \ unixodbc-dev \ bash \ libffi-dev \ openssl-dev \ cargo \ musl-dev \ postgresql-dev \ cmake \ rust \ linux-headers \ libc-dev \ libgcc \ libstdc++ \ ca-certificates \ zlib-dev \ bzip2-dev \ xz-dev \ lz4-dev \ zstd-dev \ snappy-dev \ brotli-dev \ build-base \ autoconf \ boost-dev \ flex \ libxml2-dev \ libxslt-dev \ libjpeg-turbo-dev \ ninja \ git \ && pip install --upgrade pip && pip install pipenv cython numpy ARG ARROW_VERSION=17.0.0 ARG ARROW_SHA256=8379554d89f19f2c8db63620721cabade62541f47a4e706dfb0a401f05a713ef ARG ARROW_BUILD_TYPE=release ENV ARROW_HOME=/usr/local \ PARQUET_HOME=/usr/local RUN mkdir /arrow \ && wget -q https://github.com/apache/arrow/archive/apache-arrow-${ARROW_VERSION}.tar.gz -O /tmp/apache-arrow.tar.gz \ && echo "${ARROW_SHA256} *apache-arrow.tar.gz" | sha256sum /tmp/apache-arrow.tar.gz \ && tar -xvf /tmp/apache-arrow.tar.gz -C /arrow --strip-components 1 # Create the patch file for re2 RUN echo "diff --git a/util/pcre.h b/util/pcre.h" > /arrow/re2_patch.diff \ && echo "index e69de29..b6f3e31 100644" >> /arrow/re2_patch.diff \ && echo "--- a/util/pcre.h" >> /arrow/re2_patch.diff \ && echo "+++ b/util/pcre.h" >> /arrow/re2_patch.diff \ && echo "@@ -21,6 +21,7 @@" >> /arrow/re2_patch.diff \ && echo " #include \"re2/filtered_re2.h\"" >> /arrow/re2_patch.diff \ && echo " #include \"re2/pod_array.h\"" >> /arrow/re2_patch.diff \ && echo " #include \"re2/stringpiece.h\"" >> /arrow/re2_patch.diff \ && echo "+#include <cstdint>" >> /arrow/re2_patch.diff # Configure the build using CMake RUN cd /arrow/cpp \ && cmake --preset ninja-release-python # Pre-fetch dependencies without building RUN cd /arrow/cpp \ && cmake --build . --target re2_ep -- -j1 || true # Apply the patch to re2 after the dependencies are fetched but before the build RUN cd /arrow/cpp/re2_ep-prefix/src/re2_ep \ && patch -p1 < /arrow/re2_patch.diff # Continue with the build and install Apache Arrow RUN cd /arrow/cpp \ && cmake --build . --target install \ && rm -rf /arrow /tmp/apache-arrow.tar.gz COPY Pipfile . COPY Pipfile.lock . RUN PIPENV_VENV_IN_PROJECT=1 pipenv install --deploy # Final Stage FROM base AS runtime COPY --from=base /.venv /.venv ENV PATH="/.venv/bin:$PATH" WORKDIR /app COPY src . CMD ["python3", "main.py"]I use pipenv to build dependencies, so you can customize the image for your needs. or just add
RUN pip install pyarrowor update these lines from original Dockerfile above like:RUN cd /arrow/cpp \ && cmake --build . --target install \ && cd /arrow/python \ && python setup.py build_ext --build-type=$ARROW_BUILD_TYPE --with-parquet \ && python setup.py install \ && rm -rf /arrow /tmp/apache-arrow.tar.gzthere is also a bug with pcre.h in apache arrow source code, so I applied patch within the Dockerimage. maybe it's not bug though, but I reported it here: #43350
I think necessary reply here, because that docker help me so much. Thanks
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I've managed to build pyarrow with apache arrow finally, but the resulted image is 3,5GB
And building lasts about 30 min. Here is the confirmed docker file:
I use pipenv to build dependencies, so you can customize the image for your needs.
or just add
RUN pip install pyarrowor update these lines from original Dockerfile above like:RUN cd /arrow/cpp \ && cmake --build . --target install \ && cd /arrow/python \ && python setup.py build_ext --build-type=$ARROW_BUILD_TYPE --with-parquet \ && python setup.py install \ && rm -rf /arrow /tmp/apache-arrow.tar.gzthere is also a bug with pcre.h in apache arrow source code, so I applied patch within the Dockerimage. maybe it's not bug though, but I reported it here: #43350