buananetpbun

Default Password and Username For Modem ONT Telkom Indihome

username : admin
password : %0|F?H@f!berhO3e

username : telecomadmin
password : zep2kjzol

username : admin
password : Telkomdso123

buananetpbun

How Port Knocking Maker - Mikrotik Script RouterOS
In computer networking, port knocking is a method of externally opening ports on a firewall by generating a connection attempt on a set of prespecified closed ports. Once a correct sequence of connection attempts is received, the firewall rules are dynamically modified to allow the host which sent the connection attempts to connect over specific port(s). A variant called single packet authorization (SPA) exists, where only a single "knock" is needed, consisting of an encrypted packet.

The primary purpose of port knocking is to prevent an attacker from scanning a system for potentially exploitable services by doing a port scan, because unless the attacker sends the correct knock sequence, the protected ports will appear closed

###########################################################
# Mikrotik Port Knocking Generator with Icmp + Packet Size
# Date/Time: 2/14/2021, 12:14:10 PM
# https://fb.me/buananet.pbun
##################################################

buananetpbun

Load balance PCC 3 ISP on mikrotik is a technique for distributing traffic load on two or more connection lines in a balanced way, 
so that traffic can run optimally, maximize throughput, reduce response time and avoid overloading one of the connection lines.

################################################
# LOAD BALANCING (LB) PCC SCRIPT GENERATOR
# Date/Time: 2/13/2021, 9:19:38 PM
# https://fb.me/buananet.pbun
# Load Balancing Metode -> PCC
################################################

buananetpbun

Load balance PCC 2 ISP on mikrotik is a technique for distributing traffic load on two or more connection lines in a balanced way, 
so that traffic can run optimally, maximize throughput, reduce response time and avoid overloading one of the connection lines.

################################################
# LOAD BALANCING (LB) PCC SCRIPT GENERATOR
# Date/Time: 2/13/2021, 9:19:38 PM
# https://fb.me/buananet.pbun
# Load Balancing Metode -> PCC
################################################

buananetpbun

The way this script works is simple but smart, this script will monitor anyone who intends to activate the Mirotik Protected Bootloader, it will be detected immediately and the router will automatically shutdown immediately, when the router is turned on again, all the Protected Bootloader settings will be returned to the default setting, so any prank actions of malicious intruders before will be in vain

If after installing this script the router shuts down itself, don't panic yet, it could be that the script is working and it might mean that someone is trying to activate the bootloader on the router illegally, if it's true, this can be seen by changing the window caption or identity in Winbox to BOOTLOADER> Min: 00:00:20 - Max: 00:10:00

Why does this script have to change the identity or caption in Winbox? I am trying to think if the reset button and NetInstall don't work at least we know how much time for the "reformat hold button" it takes and how long it takes to press the reset button for it to work. Pl