-
-
Save buhman/7162560 to your computer and use it in GitHub Desktop.
| localhost ~ # cat <<EOF> /etc/wpa_supplicant.conf | |
| ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel | |
| update_config=1 | |
| EOF | |
| localhost ~ # wpa_supplicant -iwlp1s0 -Dnl80211 -c/etc/wpa_supplicant.conf -B | |
| Successfully initialized wpa_supplicant | |
| localhost ~ # wpa_cli | |
| wpa_cli v2.0 | |
| Copyright (c) 2004-2012, Jouni Malinen <[email protected]> and contributors | |
| This software may be distributed under the terms of the BSD license. | |
| See README for more details. | |
| Selected interface 'wlp1s0' | |
| Interactive mode | |
| > status | |
| wpa_state=DISCONNECTED | |
| p2p_device_address=00:15:6d:85:5b:1f | |
| address=00:15:6d:85:5b:1f | |
| > scan | |
| OK | |
| <3>CTRL-EVENT-SCAN-RESULTS | |
| > scan_results | |
| bssid / frequency / signal level / flags / ssid | |
| f8:1a:67:78:4b:af 2462 -34 [WPA2-PSK-CCMP][ESS] buhman | |
| > add_network | |
| 0 | |
| > list_network | |
| network id / ssid / bssid / flags | |
| 0 any [DISABLED] | |
| > set_network 0 ssid "buhman" | |
| OK | |
| > set_network 0 psk "world domination" | |
| OK | |
| > list_network | |
| network id / ssid / bssid / flags | |
| 0 buhman any [DISABLED] | |
| > enable_network 0 | |
| OK | |
| <3>CTRL-EVENT-SCAN-RESULTS | |
| <3>WPS-AP-AVAILABLE | |
| <3>SME: Trying to authenticate with f8:1a:67:78:4b:af (SSID='buhman' freq=2462 MHz) | |
| <3>Trying to associate with f8:1a:67:78:4b:af (SSID='buhman' freq=2462 MHz) | |
| <3>Associated with f8:1a:67:78:4b:af | |
| <3>WPA: Key negotiation completed with f8:1a:67:78:4b:af [PTK=CCMP GTK=CCMP] | |
| <3>CTRL-EVENT-CONNECTED - Connection to f8:1a:67:78:4b:af completed [id=0 id_str=] | |
| > status | |
| bssid=f8:1a:67:78:4b:af | |
| ssid=buhman | |
| id=0 | |
| mode=station | |
| pairwise_cipher=CCMP | |
| group_cipher=CCMP | |
| key_mgmt=WPA2-PSK | |
| wpa_state=COMPLETED | |
| p2p_device_address=00:15:6d:85:5b:1f | |
| address=00:15:6d:85:5b:1f | |
| > list_networks | |
| network id / ssid / bssid / flags | |
| 0 buhman any [CURRENT] | |
| > save_config | |
| OK | |
| > quit | |
| localhost ~ # cat /etc/wpa_supplicant.conf | |
| ctrl_interface=/run/wpa_supplicant | |
| update_config=1 | |
| network={ | |
| ssid="buhman" | |
| psk="world domination" | |
| } |
| localhost ~ # wpa_cli | |
| wpa_cli v2.0 | |
| Copyright (c) 2004-2012, Jouni Malinen <[email protected]> and contributors | |
| This software may be distributed under the terms of the BSD license. | |
| See README for more details. | |
| Selected interface 'wlp1s0' | |
| Interactive mode | |
| > add_network | |
| 1 | |
| > set_network 1 ssid "starbucks" | |
| OK | |
| > set_network 1 key_mgmt NONE | |
| OK | |
| > list_networks | |
| network id / ssid / bssid / flags | |
| 0 buhman any | |
| 1 starbucks any [DISABLED] | |
| > enable_network 1 | |
| OK | |
| <3>CTRL-EVENT-SCAN-RESULTS | |
| <3>WPS-AP-AVAILABLE | |
| <3>SME: Trying to authenticate with 3e:20:1d:c6:0e:d2 (SSID='starbucks' freq=2412 MHz) | |
| <3>Trying to associate with 3e:20:1d:c6:0e:d2 (SSID='starbucks' freq=2412 MHz) | |
| <3>Associated with 3e:20:1d:c6:0e:d2 | |
| <3>CTRL-EVENT-CONNECTED - Connection to 3e:20:1d:c6:0e:d2 completed [id=0 id_str=] | |
| > save_config | |
| OK | |
| > quit |
@buhman I have been using wpa_cli for a while, and it's working great! But now I have hundreds of networks, and I have a hard time finding the network number associated with the ssid that I want to connect to. Is there any way that I can search for a network, or select a network, based on its ssid?
For example, imagine the following:
> list_networks
network id / ssid / bssid / flags
0 jumjee any [DISABLED]
1 TG any [DISABLED]
2 AlphaBeta any [DISABLED]
3 the wand any [DISABLED]
4 DRINK ALL CITY COFFEE any [DISABLED]
5 StellarPizza any [DISABLED]
6 HUB any [DISABLED]
<many more networks...>
125 Tullys Free Wi-Fi any [DISABLED]
> select_network 75
OKwhere network 75 is a network called "foo" (where the ssid is "foo"). It's very hard to find the network number, especially when list_networks seems to limit its output to 125 networks. Is there a command, or script, that I can run that will do something like select_network foo? Or even something like find_network_by_ssid foo and will return "75"?
Beia
@Lukeswart That 125 limit sounds awful, have you reported these issues to hostap yet? That surely sounds like a bug, and moreover I agree that the requirement for associated numbers instead of SSID seems like very poor UI design.
My wireless interface does not get assigned an IPv6 link local address (which I am guessing should never be the case). I get to see the correct link-local once in a while but it vanishes after a reboot or network restart. I am using wpa_supplicant with nl80211 driver. I can connect two devices using p2p (wifi direct) and I wish to be able to ping one from another using the link-local IPv6 address.
@modulitos To find the number of a given ssid, you can grep for it in non-interactive mode like so wpa_cli list_networks | grep ssid.
Do you have a wpa_cli and p2p_cli that work (compiled) for Android 5.0 and later? Binaries that work on 4.4 return: "only position independent executables (PIE) are supported."