Calico + Bootkube Example

kube-flannel-cfg.yaml

# This ConfigMap is used to configure a self-hosted Calico installation.
kind: ConfigMap
apiVersion: v1
metadata:
  name: calico-config
  namespace: kube-system
data:
  # Configure this with the location of your etcd cluster.
  etcd_endpoints: "http://kube-etcd:2379"

  # Configure the Calico backend to use.
  calico_backend: "bird"

  # The CNI network configuration to install on each node.
  cni_network_config: |-
    {
        "name": "k8s-pod-network",
        "type": "calico",
        "etcd_endpoints": "__ETCD_ENDPOINTS__",
        "etcd_key_file": "__ETCD_KEY_FILE__",
        "etcd_cert_file": "__ETCD_CERT_FILE__",
        "etcd_ca_cert_file": "__ETCD_CA_CERT_FILE__",
        "log_level": "info",
        "ipam": {
            "type": "calico-ipam"
        },
        "policy": {
            "type": "k8s",
            "k8s_api_root": "https://__KUBERNETES_SERVICE_HOST__:__KUBERNETES_SERVICE_PORT__",
            "k8s_auth_token": "__SERVICEACCOUNT_TOKEN__"
        },
        "kubernetes": {
            "kubeconfig": "__KUBECONFIG_FILEPATH__"
        }
    }

  # The default IP Pool to be created for the cluster.
  # Pod IP addresses will be assigned from this pool.
  ippool.yaml: |
      apiVersion: v1
      kind: ipPool
      metadata:
        cidr: 10.2.0.0/16
      spec:
        nat-outgoing: true

  # If you're using TLS enabled etcd uncomment the following.
  # You must also populate the Secret below with these files.
  etcd_ca: ""   # "/calico-secrets/etcd-ca"
  etcd_cert: "" # "/calico-secrets/etcd-cert"
  etcd_key: ""  # "/calico-secrets/etcd-key"

kube-flannel.yaml

# This manifest installs the calico/node container, as well
# as the Calico CNI plugins and network config on
# each master and worker node in a Kubernetes cluster.
kind: DaemonSet
apiVersion: extensions/v1beta1
metadata:
  name: calico-node
  namespace: kube-system
  labels:
    k8s-app: calico-node
spec:
  selector:
    matchLabels:
      k8s-app: calico-node
  template:
    metadata:
      labels:
        k8s-app: calico-node
      annotations:
        scheduler.alpha.kubernetes.io/critical-pod: ''
        scheduler.alpha.kubernetes.io/tolerations: |
          [{"key": "dedicated", "value": "master", "effect": "NoSchedule" },
           {"key":"CriticalAddonsOnly", "operator":"Exists"}]
    spec:
      hostNetwork: true
      containers:
        # Runs calico/node container on each Kubernetes node.  This
        # container programs network policy and routes on each
        # host.
        - name: calico-node
          image: quay.io/calico/node:v1.1.1
          env:
            # The location of the Calico etcd cluster.
            - name: ETCD_ENDPOINTS
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_endpoints
            # Choose the backend to use.
            - name: CALICO_NETWORKING_BACKEND
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: calico_backend
            # Disable file logging so `kubectl logs` works.
            - name: CALICO_DISABLE_FILE_LOGGING
              value: "true"
            # Set Felix endpoint to host default action to ACCEPT.
            - name: FELIX_DEFAULTENDPOINTTOHOSTACTION
              value: "ACCEPT"
            # Don't configure a default pool.  This is done by the Job
            # below.
            - name: NO_DEFAULT_POOLS
              value: "true"
            - name: FELIX_LOGSEVERITYSCREEN
              value: "info"
            # Location of the CA certificate for etcd.
            - name: ETCD_CA_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_ca
            # Location of the client key for etcd.
            - name: ETCD_KEY_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_key
            # Location of the client certificate for etcd.
            - name: ETCD_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_cert
            # Auto-detect the BGP IP address.
            - name: IP
              value: ""
          securityContext:
            privileged: true
          volumeMounts:
            - mountPath: /lib/modules
              name: lib-modules
              readOnly: true
            - mountPath: /var/run/calico
              name: var-run-calico
              readOnly: false
            # - mountPath: /calico-secrets
            #   name: etcd-certs
        # This container installs the Calico CNI binaries
        # and CNI network config file on each node.
        - name: install-cni
          image: quay.io/calico/cni:v1.6.2
          command: ["/install-cni.sh"]
          env:
            # The location of the Calico etcd cluster.
            - name: ETCD_ENDPOINTS
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_endpoints
            # The CNI network config to install on each node.
            - name: CNI_NETWORK_CONFIG
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: cni_network_config
          volumeMounts:
            - mountPath: /host/opt/cni/bin
              name: cni-bin-dir
            - mountPath: /host/etc/cni/net.d
              name: cni-net-dir
            # - mountPath: /calico-secrets
            #   name: etcd-certs
      volumes:
        # Used by calico/node.
        - name: lib-modules
          hostPath:
            path: /lib/modules
        - name: var-run-calico
          hostPath:
            path: /var/run/calico
        # Used to install CNI.
        - name: cni-bin-dir
          hostPath:
            path: /opt/cni/bin
        - name: cni-net-dir
          hostPath:
            path: /etc/cni/net.d
        # Mount in the etcd TLS secrets.
        # - name: etcd-certs
        #   secret:
        #     secretName: calico-etcd-secrets

---

# This manifest deploys the Calico policy controller on Kubernetes.
# See https://github.com/projectcalico/k8s-policy
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: calico-policy-controller
  namespace: kube-system
  labels:
    k8s-app: calico-policy
  annotations:
    scheduler.alpha.kubernetes.io/critical-pod: ''
    scheduler.alpha.kubernetes.io/tolerations: |
      [{"key": "dedicated", "value": "master", "effect": "NoSchedule" },
       {"key":"CriticalAddonsOnly", "operator":"Exists"}]
spec:
  # The policy controller can only have a single active instance.
  replicas: 1
  strategy:
    type: Recreate
  template:
    metadata:
      name: calico-policy-controller
      namespace: kube-system
      labels:
        k8s-app: calico-policy
    spec:
      # The policy controller must run in the host network namespace so that
      # it isn't governed by policy that would prevent it from working.
      hostNetwork: true
      containers:
        - name: calico-policy-controller
          image: quay.io/calico/kube-policy-controller:v0.5.4
          env:
            # The location of the Calico etcd cluster.
            - name: ETCD_ENDPOINTS
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_endpoints
            # Location of the CA certificate for etcd.
            - name: ETCD_CA_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_ca
            # Location of the client key for etcd.
            - name: ETCD_KEY_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_key
            # Location of the client certificate for etcd.
            - name: ETCD_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_cert
            # The location of the Kubernetes API.  Use the default Kubernetes
            # service for API access.
            - name: K8S_API
              value: "https://kubernetes.default:443"
            # Since we're running in the host namespace and might not have KubeDNS
            # access, configure the container's /etc/hosts to resolve
            # kubernetes.default to the correct service clusterIP.
            - name: CONFIGURE_ETC_HOSTS
              value: "true"
          # volumeMounts:
          #   # Mount in the etcd TLS secrets.
          #   - mountPath: /calico-secrets
          #     name: etcd-certs
      # volumes:
        # Mount in the etcd TLS secrets.
        # - name: etcd-certs
        #   secret:
        #     secretName: calico-etcd-secrets

---

## This manifest deploys a Job which performs one time
# configuration of Calico
apiVersion: batch/v1
kind: Job
metadata:
  name: configure-calico
  namespace: kube-system
  labels:
    k8s-app: calico
spec:
  template:
    metadata:
      name: configure-calico
      annotations:
        scheduler.alpha.kubernetes.io/critical-pod: ''
        scheduler.alpha.kubernetes.io/tolerations: |
          [{"key": "dedicated", "value": "master", "effect": "NoSchedule" },
           {"key":"CriticalAddonsOnly", "operator":"Exists"}]
    spec:
      hostNetwork: true
      restartPolicy: OnFailure
      containers:
        # Writes basic configuration to datastore.
        - name: configure-calico
          image: calico/ctl:v1.1.1
          args:
          - apply
          - -f
          - /etc/config/calico/ippool.yaml
          volumeMounts:
            - name: config-volume
              mountPath: /etc/config
            # Mount in the etcd TLS secrets.
            # - mountPath: /calico-secrets
            #   name: etcd-certs
          env:
            # The location of the etcd cluster.
            - name: ETCD_ENDPOINTS
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_endpoints
            # Location of the CA certificate for etcd.
            - name: ETCD_CA_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_ca
            # Location of the client key for etcd.
            - name: ETCD_KEY_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_key
            # Location of the client certificate for etcd.
            - name: ETCD_CERT_FILE
              valueFrom:
                configMapKeyRef:
                  name: calico-config
                  key: etcd_cert
      volumes:
        - name: config-volume
          configMap:
            name: calico-config
            items:
            - key: ippool.yaml
              path: calico/ippool.yaml
        # Mount in the etcd TLS secrets.
        # - name: etcd-certs
        #   secret:
        #     secretName: calico-etcd-secrets