gistfile1.txt

> make -f clouds/makefile upload
cat build/clouds/clouds.d build/clouds/cv_scaler.d build/clouds/resources.d build/clouds/settings.d build/clouds/ui.d build/clouds/adc.d build/clouds/codec.d build/clouds/debug_port.d build/clouds/gate_input.d build/clouds/leds.d build/clouds/switches.d build/clouds/system.d build/clouds/correlator.d build/clouds/granular_processor.d build/clouds/mu_law.d build/clouds/frame_transformation.d build/clouds/phase_vocoder.d build/clouds/stft.d build/clouds/atan.d build/clouds/units.d build/clouds/random.d build/clouds/bootloader_utils.d build/clouds/system_clock.d build/clouds/core_cm3.d build/clouds/system_stm32f4xx.d build/clouds/misc.d build/clouds/stm32f4xx_adc.d build/clouds/stm32f4xx_can.d build/clouds/stm32f4xx_crc.d build/clouds/stm32f4xx_cryp_aes.d build/clouds/stm32f4xx_cryp.d build/clouds/stm32f4xx_cryp_des.d build/clouds/stm32f4xx_cryp_tdes.d build/clouds/stm32f4xx_dac.d build/clouds/stm32f4xx_dbgmcu.d build/clouds/stm32f4xx_dcmi.d build/clouds/stm32f4xx_dma.d build/clouds/stm32f4xx_exti.d build/clouds/stm32f4xx_flash.d build/clouds/stm32f4xx_fsmc.d build/clouds/stm32f4xx_gpio.d build/clouds/stm32f4xx_hash.d build/clouds/stm32f4xx_hash_md5.d build/clouds/stm32f4xx_hash_sha1.d build/clouds/stm32f4xx_i2c.d build/clouds/stm32f4xx_iwdg.d build/clouds/stm32f4xx_pwr.d build/clouds/stm32f4xx_rcc.d build/clouds/stm32f4xx_rng.d build/clouds/stm32f4xx_rtc.d build/clouds/stm32f4xx_sdio.d build/clouds/stm32f4xx_spi.d build/clouds/stm32f4xx_syscfg.d build/clouds/stm32f4xx_tim.d build/clouds/stm32f4xx_usart.d build/clouds/stm32f4xx_wwdg.d build/clouds/startup_stm32f4xx.d > build/clouds/depends.mk
openocd -f stmlib/programming/jtag/interface_arm-usb-ocd-h.cfg -f stmlib/programming/jtag/stm32f4xx_jtag.cfg -f stmlib/programming/jtag/prelude_f4xx.cfg  -c "flash erase_address 0x08000000 16384" -c "reset" -c "flash write_image erase build/clouds/clouds_bootloader_combo.bin 0x08000000" -c "verify_image build/clouds/clouds_bootloader_combo.bin" -f stmlib/programming/jtag/postlude.cfg || openocd -f stmlib/programming/jtag/interface_arm-usb-ocd-h.cfg -f stmlib/programming/jtag/stm32f4xx_jtag.cfg -f stmlib/programming/jtag/prelude_f4xx.cfg  -c "flash erase_address 0x08000000 16384" -c "reset" -c "flash write_image erase build/clouds/clouds_bootloader_combo.bin 0x08000000" -c "verify_image build/clouds/clouds_bootloader_combo.bin" -f stmlib/programming/jtag/postlude.cfg
Open On-Chip Debugger 0.9.0 (2016-02-16-21:26)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain connect_deassert_srst
Warn : Using DEPRECATED interface driver 'ft2232'
Info : Consider using the 'ftdi' interface driver, with configuration files in interface/ftdi/...
Info : max TCK change to: 30000 kHz
Info : clock speed 2000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: stm32f4xxx.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Error: Target not examined yet

Open On-Chip Debugger 0.9.0 (2016-02-16-21:26)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 2000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain connect_deassert_srst
Warn : Using DEPRECATED interface driver 'ft2232'
Info : Consider using the 'ftdi' interface driver, with configuration files in interface/ftdi/...
Info : max TCK change to: 30000 kHz
Info : clock speed 2000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: stm32f4xxx.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Error: Target not examined yet

make: *** [upload_combo_jtag_erase_first] Error 1