Truenas uses incus on port 53 for internal dns resolution. This clashes with pihole.
From the truenas shell, run the following command to change the port used by incus.
sudo incus network set incusbr0 raw.dnsmasq="port=5354"Truenas uses incus on port 53 for internal dns resolution. This clashes with pihole.
From the truenas shell, run the following command to change the port used by incus.
sudo incus network set incusbr0 raw.dnsmasq="port=5354"Edit
/usr/share/X11/xkb/symbols/gb
and replace
key <BKSL> { [numbersign, asciitilde, dead_grave, dead_breve ] };
with
Main board
| ID | value | voltage | Orientation |
|---|---|---|---|
| c2 | 22uf | 16v | axial |
| c7 | 22uf | 16v | axial |
| c9 | axial | ||
| c11 | 100uf | 16v | axial |
| c12 | axial | ||
| c49 | 1000uf | 16v | axial |
| c70 | 100uf | 16v | axial |