Download source, compile and install shadowsocks-libev and Cloak

shadowsocks-ck-build.sh

#!/usr/bin/env bash
PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/go/bin:/usr/local/sbin:~/bin
export PATH
#
# Auto compile install Shadowsocks Server with Cloak 
#
# Copyright (C) 2016-2018 Teddysun <[email protected]>
#
# Forked and modified by cbeuw from https://github.com/teddysun/shadowsocks_install/blob/master/shadowsocks-all.sh
#
# System Required:  CentOS 6+, Debian7+, Ubuntu12+
#
# Reference URL:
# https://github.com/shadowsocks/shadowsocks
# https://github.com/shadowsocks/shadowsocks-libev
# https://github.com/cbeuw/Cloak


red='\033[0;31m'
green='\033[0;32m'
yellow='\033[0;33m'
plain='\033[0m'

[[ $EUID -ne 0 ]] && echo -e "[${red}Error${plain}] This script must be run as root!" && exit 1

cur_dir=$( pwd )

libsodium_file="libsodium-1.0.16"
libsodium_url="https://github.com/jedisct1/libsodium/releases/download/1.0.16/libsodium-1.0.16.tar.gz"

mbedtls_file="mbedtls-2.12.0"
mbedtls_url="https://tls.mbed.org/download/mbedtls-2.12.0-gpl.tgz"

shadowsocks_libev_init="/etc/init.d/shadowsocks-libev"
shadowsocks_libev_config="/etc/shadowsocks-libev/config.json"
shadowsocks_libev_centos="https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocks-libev"
shadowsocks_libev_debian="https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocks-libev-debian"

# Stream Ciphers
common_ciphers=(
aes-256-gcm
aes-192-gcm
aes-128-gcm
aes-256-ctr
aes-192-ctr
aes-128-ctr
aes-256-cfb
aes-192-cfb
aes-128-cfb
camellia-128-cfb
camellia-192-cfb
camellia-256-cfb
xchacha20-ietf-poly1305
chacha20-ietf-poly1305
chacha20-ietf
chacha20
salsa20
rc4-md5
)


disable_selinux(){
	if [ -s /etc/selinux/config ] && grep 'SELINUX=enforcing' /etc/selinux/config; then
		sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
		setenforce 0
	fi
}

check_sys(){
	local checkType=$1
	local value=$2

	local release=''
	local systemPackage=''

	if [[ -f /etc/redhat-release ]]; then
		release="centos"
		systemPackage="yum"
	elif grep -Eqi "debian" /etc/issue; then
		release="debian"
		systemPackage="apt"
	elif grep -Eqi "ubuntu" /etc/issue; then
		release="ubuntu"
		systemPackage="apt"
	elif grep -Eqi "centos|red hat|redhat" /etc/issue; then
		release="centos"
		systemPackage="yum"
	elif grep -Eqi "debian|raspbian" /proc/version; then
		release="debian"
		systemPackage="apt"
	elif grep -Eqi "ubuntu" /proc/version; then
		release="ubuntu"
		systemPackage="apt"
	elif grep -Eqi "centos|red hat|redhat" /proc/version; then
		release="centos"
		systemPackage="yum"
	fi

	if [[ "${checkType}" == "sysRelease" ]]; then
		if [ "${value}" == "${release}" ]; then
			return 0
		else
			return 1
		fi
	elif [[ "${checkType}" == "packageManager" ]]; then
		if [ "${value}" == "${systemPackage}" ]; then
			return 0
		else
			return 1
		fi
	fi
}

version_ge(){
	test "$(echo "$@" | tr " " "\n" | sort -rV | head -n 1)" == "$1"
}

version_gt(){
	test "$(echo "$@" | tr " " "\n" | sort -V | head -n 1)" != "$1"
}

check_kernel_version(){
	local kernel_version=$(uname -r | cut -d- -f1)
	if version_gt ${kernel_version} 3.7.0; then
		return 0
	else
		return 1
	fi
}

check_kernel_headers(){
	if check_sys packageManager yum; then
		if rpm -qa | grep -q headers-$(uname -r); then
			return 0
		else
			return 1
		fi
	elif check_sys packageManager apt; then
		if dpkg -s linux-headers-$(uname -r) > /dev/null 2>&1; then
			return 0
		else
			return 1
		fi
	fi
	return 1
}

getversion(){
	if [[ -s /etc/redhat-release ]]; then
		grep -oE  "[0-9.]+" /etc/redhat-release
	else
		grep -oE  "[0-9.]+" /etc/issue
	fi
}

centosversion(){
	if check_sys sysRelease centos; then
		local code=$1
		local version="$(getversion)"
		local main_ver=${version%%.*}
		if [ "$main_ver" == "$code" ]; then
			return 0
		else
			return 1
		fi
	else
		return 1
	fi
}

autoconf_version(){
	if [ ! "$(command -v autoconf)" ]; then
		echo -e "[${green}Info${plain}] Starting install package autoconf"
		if check_sys packageManager yum; then
			yum install -y autoconf > /dev/null 2>&1 || echo -e "[${red}Error:${plain}] Failed to install autoconf"
		elif check_sys packageManager apt; then
			apt-get -y update > /dev/null 2>&1
			apt-get -y install autoconf > /dev/null 2>&1 || echo -e "[${red}Error:${plain}] Failed to install autoconf"
		fi
	fi
	local autoconf_ver=$(autoconf --version | grep autoconf | grep -oE "[0-9.]+")
	if version_ge ${autoconf_ver} 2.67; then
		return 0
	else
		return 1
	fi
}

get_ip(){
	[ -z ${IP} ] && IP=$( wget -qO- -t1 -T2 ipv4.icanhazip.com )
	[ -z ${IP} ] && IP=$( wget -qO- -t1 -T2 ipinfo.io/ip )
	[ -z ${IP} ] && IP=$( wget -qO- -t1 -T2 ip.42.pl/ip )
	echo ${IP}
}

get_ipv6(){
	local ipv6=$(wget -qO- -t1 -T2 ipv6.icanhazip.com)
	[ -z ${ipv6} ] && return 1 || return 0
}

get_libev_ver(){
	libev_ver=$(wget --no-check-certificate -qO- https://api.github.com/repos/shadowsocks/shadowsocks-libev/releases/latest | grep 'tag_name' | cut -d\" -f4)
	[ -z ${libev_ver} ] && echo -e "[${red}Error${plain}] Get shadowsocks-libev latest version failed" && exit 1
}

get_opsy(){
	[ -f /etc/redhat-release ] && awk '{print ($1,$3~/^[0-9]/?$3:$4)}' /etc/redhat-release && return
	[ -f /etc/os-release ] && awk -F'[= "]' '/PRETTY_NAME/{print $3,$4,$5}' /etc/os-release && return
	[ -f /etc/lsb-release ] && awk -F'[="]+' '/DESCRIPTION/{print $2}' /etc/lsb-release && return
}

is_64bit(){
	if [ `getconf WORD_BIT` = '32' ] && [ `getconf LONG_BIT` = '64' ] ; then
		return 0
	else
		return 1
	fi
}

debianversion(){
	if check_sys sysRelease debian;then
		local version=$( get_opsy )
		local code=${1}
		local main_ver=$( echo ${version} | sed 's/[^0-9]//g')
		if [ "${main_ver}" == "${code}" ];then
			return 0
		else
			return 1
		fi
	else
		return 1
	fi
}

download(){
	local filename=$(basename $1)
	if [ -f ${1} ]; then
		echo "${filename} [found]"
	else
		echo "${filename} not found, download now..."
		wget --no-check-certificate -c -t3 -T60 -O ${1} ${2}
		if [ $? -ne 0 ]; then
			echo -e "[${red}Error${plain}] Download ${filename} failed."
			exit 1
		fi
	fi
}

download_files(){
	cd ${cur_dir}

	get_libev_ver
	shadowsocks_libev_file="shadowsocks-libev-$(echo ${libev_ver} | sed -e 's/^[a-zA-Z]//g')"
	shadowsocks_libev_url="https://github.com/shadowsocks/shadowsocks-libev/releases/download/${libev_ver}/${shadowsocks_libev_file}.tar.gz"

	download "${shadowsocks_libev_file}.tar.gz" "${shadowsocks_libev_url}"
	if check_sys packageManager yum; then
		download "${shadowsocks_libev_init}" "${shadowsocks_libev_centos}"
	elif check_sys packageManager apt; then
		download "${shadowsocks_libev_init}" "${shadowsocks_libev_debian}"
	fi


}

get_char(){
	SAVEDSTTY=$(stty -g)
	stty -echo
	stty cbreak
	dd if=/dev/tty bs=1 count=1 2> /dev/null
	stty -raw
	stty echo
	stty $SAVEDSTTY
}

error_detect_depends(){
	local command=$1
	local depend=`echo "${command}" | awk '{print $4}'`
	echo -e "[${green}Info${plain}] Starting to install package ${depend}"
	${command} > /dev/null 2>&1
	if [ $? -ne 0 ]; then
		echo -e "[${red}Error${plain}] Failed to install ${red}${depend}${plain}"
		exit 1
	fi
}

config_firewall(){
	if centosversion 6; then
		/etc/init.d/iptables status > /dev/null 2>&1
		if [ $? -eq 0 ]; then
			iptables -L -n | grep -i ${shadowsocksport} > /dev/null 2>&1
			if [ $? -ne 0 ]; then
				iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport ${shadowsocksport} -j ACCEPT
				iptables -I INPUT -m state --state NEW -m udp -p udp --dport ${shadowsocksport} -j ACCEPT
				/etc/init.d/iptables save
				/etc/init.d/iptables restart
			else
				echo -e "[${green}Info${plain}] port ${green}${shadowsocksport}${plain} already be enabled."
			fi
		else
			echo -e "[${yellow}Warning${plain}] iptables looks like not running or not installed, please enable port ${shadowsocksport} manually if necessary."
		fi
	elif centosversion 7; then
		systemctl status firewalld > /dev/null 2>&1
		if [ $? -eq 0 ]; then
			firewall-cmd --permanent --zone=public --add-port=${shadowsocksport}/tcp
			firewall-cmd --permanent --zone=public --add-port=${shadowsocksport}/udp
			firewall-cmd --reload
		else
			echo -e "[${yellow}Warning${plain}] firewalld looks like not running or not installed, please enable port ${shadowsocksport} manually if necessary."
		fi
	fi
}

generate_credentials(){

	if [ "${cloak}" == "y" ] || [ "${cloak}" == "Y" ]; then
		ck-server -u | read ckauid
		ck-server -k | read -d, ckpub ckpv
	fi
}

config_shadowsocks(){
	local server_value="\"0.0.0.0\""
	if get_ipv6; then
		server_value="[\"[::0]\",\"0.0.0.0\"]"
	fi

	if [ ! -d "$(dirname ${shadowsocks_libev_config})" ]; then
		mkdir -p $(dirname ${shadowsocks_libev_config})
	fi

	if [ "${cloak}" == "y" ] || [ "${cloak}" == "Y" ]; then
		cat > ${shadowsocks_libev_config}<<-EOF
{
    "server":${server_value},
    "server_port":${shadowsocksport},
    "password":"${shadowsockspwd}",
    "timeout":300,
    "user":"nobody",
    "method":"${shadowsockscipher}",
    "fast_open":false,
    "nameserver":"8.8.8.8",
    "mode":"tcp_and_udp",
    "plugin":"ck-server",
    "plugin_opts":"WebServerAddr=${ckwebaddr};PrivateKey=${ckpv};AdminUID=${ckauid}"
}
EOF

     else
	     cat > ${shadowsocks_libev_config}<<-EOF
{
    "server":${server_value},
    "server_port":${shadowsocksport},
    "password":"${shadowsockspwd}",
    "timeout":300,
    "user":"nobody",
    "method":"${shadowsockscipher}",
    "fast_open":false,
    "nameserver":"8.8.8.8",
    "mode":"tcp_and_udp"
}
EOF

fi
}

install_dependencies(){
	if check_sys packageManager yum; then
		echo -e "[${green}Info${plain}] Checking the EPEL repository..."
		if [ ! -f /etc/yum.repos.d/epel.repo ]; then
			yum install -y epel-release > /dev/null 2>&1
		fi
		[ ! -f /etc/yum.repos.d/epel.repo ] && echo -e "[${red}Error${plain}] Install EPEL repository failed, please check it." && exit 1
		[ ! "$(command -v yum-config-manager)" ] && yum install -y yum-utils > /dev/null 2>&1
		[ x"$(yum-config-manager epel | grep -w enabled | awk '{print $3}')" != x"True" ] && yum-config-manager --enable epel > /dev/null 2>&1
		echo -e "[${green}Info${plain}] Checking the EPEL repository complete..."

		yum_depends=(
		unzip gzip openssl openssl-devel gcc pcre pcre-devel libtool libevent
		autoconf automake make curl curl-devel zlib-devel cpio expat-devel gettext-devel
		libev-devel c-ares-devel git qrencode
		)
		for depend in ${yum_depends[@]}; do
			error_detect_depends "yum -y install ${depend}"
		done
	elif check_sys packageManager apt; then
		apt_depends=(
		gettext build-essential unzip gzip curl openssl libssl-dev
		autoconf automake libtool gcc make cpio libpcre3 libpcre3-dev zlib1g-dev libev-dev libc-ares-dev git qrencode
		)

		apt-get -y update
		for depend in ${apt_depends[@]}; do
			error_detect_depends "apt-get -y install ${depend}"
		done
	fi

}


install_check(){
	if check_sys packageManager yum || check_sys packageManager apt; then
		if centosversion 5; then
			return 1
		fi
		return 0
	else
		return 1
	fi
}

install_select(){
	if ! install_check; then
		echo -e "[${red}Error${plain}] Your OS is not supported to run it!"
		echo "Please change to CentOS 6+/Debian 7+/Ubuntu 12+ and try again."
		exit 1
	fi

	clear
}

install_prepare_password(){
	echo "Please enter password for shadowsocks-libev:"
	read -p "(Default password: teddysun.com):" shadowsockspwd
	[ -z "${shadowsockspwd}" ] && shadowsockspwd="teddysun.com"
	echo
	echo "password = ${shadowsockspwd}"
	echo
}

install_prepare_port() {
	while true
	do
		dport=443
		echo -e "Please enter a port for shadowsocks-libev [1-65535]"
		read -p "(Default port: ${dport}):" shadowsocksport
		[ -z "${shadowsocksport}" ] && shadowsocksport=${dport}
		expr ${shadowsocksport} + 1 &>/dev/null
		if [ $? -eq 0 ]; then
			if [ ${shadowsocksport} -ge 1 ] && [ ${shadowsocksport} -le 65535 ] && [ ${shadowsocksport:0:1} != 0 ]; then
				echo
				echo "port = ${shadowsocksport}"
				echo
				break
			fi
		fi
		echo -e "[${red}Error${plain}] Please enter a correct number [1-65535]"
	done
}

install_prepare_cipher(){
	while true
	do
		echo -e "Please select stream cipher for shadowsocks-libev:"

		for ((i=1;i<=${#common_ciphers[@]};i++ )); do
			hint="${common_ciphers[$i-1]}"
			echo -e "${green}${i}${plain}) ${hint}"
		done
		read -p "Which cipher you'd select(Default: ${common_ciphers[0]}):" pick
		[ -z "$pick" ] && pick=1
		expr ${pick} + 1 &>/dev/null
		if [ $? -ne 0 ]; then
			echo -e "[${red}Error${plain}] Please enter a number"
			continue
		fi
		if [[ "$pick" -lt 1 || "$pick" -gt ${#common_ciphers[@]} ]]; then
			echo -e "[${red}Error${plain}] Please enter a number between 1 and ${#common_ciphers[@]}"
			continue
		fi
		shadowsockscipher=${common_ciphers[$pick-1]}
		echo
		echo "cipher = ${shadowsockscipher}"
		echo
		break
	done
}

install_prepare_libev_cloak(){
	while true
	do
		echo -e "Do you want install Cloak for shadowsocks-libev? [y/n]"
		read -p "(default: y):" cloak 
		[ -z "$cloak" ] && cloak=y
		case "${cloak}" in
			y|Y|n|N)
				echo
				echo "You choose = ${cloak}"
				echo
				break
				;;
			*)
				echo -e "[${red}Error${plain}] Please only enter [y/n]"
				;;
		esac
	done

	if [ "${cloak}" == "y" ] || [ "${cloak}" == "Y" ]; then
		echo -e "Please enter a redirection IP for Cloak (leave blank to set it to 204.79.197.200:443 of bing.com):"
		read -p "" ckwebaddr
		[ -z "$ckwebaddr" ] && ckwebaddr="204.79.197.200:443"
	fi
}

install_prepare(){

	install_prepare_password
	install_prepare_port
	install_prepare_cipher
	install_prepare_libev_cloak

	echo
	echo "Press any key to start...or Press Ctrl+C to cancel"
	char=`get_char`

}

install_libsodium(){
	if [ ! -f /usr/lib/libsodium.a ]; then
		cd ${cur_dir}
		download "${libsodium_file}.tar.gz" "${libsodium_url}"
		tar zxf ${libsodium_file}.tar.gz
		cd ${libsodium_file}
		./configure --prefix=/usr && make && make install
		if [ $? -ne 0 ]; then
			echo -e "[${red}Error${plain}] ${libsodium_file} install failed."
			install_cleanup
			exit 1
		fi
	else
		echo -e "[${green}Info${plain}] ${libsodium_file} already installed."
	fi
}

install_mbedtls(){
	if [ ! -f /usr/lib/libmbedtls.a ]; then
		cd ${cur_dir}
		download "${mbedtls_file}-gpl.tgz" "${mbedtls_url}"
		tar xf ${mbedtls_file}-gpl.tgz
		cd ${mbedtls_file}
		make SHARED=1 CFLAGS=-fPIC
		make DESTDIR=/usr install
		if [ $? -ne 0 ]; then
			echo -e "[${red}Error${plain}] ${mbedtls_file} install failed."
			install_cleanup
			exit 1
		fi
	else
		echo -e "[${green}Info${plain}] ${mbedtls_file} already installed."
	fi
}



install_shadowsocks_libev(){
	cd ${cur_dir}
	tar zxf ${shadowsocks_libev_file}.tar.gz
	cd ${shadowsocks_libev_file}
	./configure --disable-documentation && make && make install
	if [ $? -eq 0 ]; then
		chmod +x ${shadowsocks_libev_init}
		local service_name=$(basename ${shadowsocks_libev_init})
		if check_sys packageManager yum; then
			chkconfig --add ${service_name}
			chkconfig ${service_name} on
		elif check_sys packageManager apt; then
			update-rc.d -f ${service_name} defaults
		fi
	else
		echo
		echo -e "[${red}Error${plain}] shadowsocks-libev install failed."
		install_cleanup
		exit 1
	fi
}

install_shadowsocks_libev_cloak(){
	if [ "${cloak}" == "y" ] || [ "${cloak}" == "Y" ]; then
		cd ${cur_dir}
		mkdir tempgo
		GOPATH=${cur_dir}/tempgo
		go get github.com/cbeuw/Cloak
		go get github.com/juju/ratelimit
		go get github.com/boltdb/bolt
		go get github.com/cbeuw/go-ecdh
		[ -d ./tempgo/src/github.com/cbeuw/Cloak ] && cd tempgo/src/github.com/cbeuw/Cloak || echo -e "[${red}Error:${plain}] Failed to git clone Cloak."
		make server
		make install
		if [ ! "$(command -v ck-server)" ]; then
			echo -e "[${red}Error${plain}] Cloak for shadowsocks-libev install failed."
			install_cleanup
			exit 1
		fi
	fi
}



install_completed_libev(){
	clear
	ldconfig
	${shadowsocks_libev_init} start
	echo
	echo -e "Congratulations, ${green}shadowsocks-libev${plain} server install completed!"
	echo -e "Your Server IP        : ${red} $(get_ip) ${plain}"
	echo -e "Your Server Port      : ${red} ${shadowsocksport} ${plain}"
	echo -e "Your Password         : ${red} ${shadowsockspwd} ${plain}"
	echo -e "Your Encryption Method: ${red} ${shadowsockscipher} ${plain}"
	echo -e "Your Cloak's Public Key: ${red} ${ckpub} ${plain}"
	echo -e "Your Cloak's Private Key: ${red} ${ckpv} ${plain}"
	echo -e "Your Cloak's AdminUID: ${red} ${ckauid} ${plain}"
}



qr_generate_libev(){
	if [ "$(command -v qrencode)" ]; then
		local tmp=$(echo -n "${shadowsockscipher}:${shadowsockspwd}@$(get_ip):${shadowsocksport}" | base64 -w0)
		local qr_code="ss://${tmp}"
		echo
		echo "Your QR Code: (For Shadowsocks Windows, OSX, Android and iOS clients)"
		echo -e "${green} ${qr_code} ${plain}"
		echo -n "${qr_code}" | qrencode -s8 -o ${cur_dir}/shadowsocks_libev_qr.png
		echo "Your QR Code has been saved as a PNG file path:"
		echo -e "${green} ${cur_dir}/shadowsocks_libev_qr.png ${plain}"
	fi
}

install_main(){
	install_libsodium
	if ! ldconfig -p | grep -wq "/usr/lib"; then
		echo "/usr/lib" > /etc/ld.so.conf.d/lib.conf
	fi
	ldconfig

	install_mbedtls
	install_shadowsocks_libev
	install_shadowsocks_libev_cloak
	install_completed_libev
	qr_generate_libev

	echo
	echo "Enjoy it!"
	echo
}

install_cleanup(){
	cd ${cur_dir}
	rm -rf tempgo 
	rm -rf ${libsodium_file} ${libsodium_file}.tar.gz
	rm -rf ${mbedtls_file} ${mbedtls_file}-gpl.tgz
	rm -rf ${shadowsocks_libev_file} ${shadowsocks_libev_file}.tar.gz
}

install_shadowsocks(){
	disable_selinux
	install_select
	install_prepare
	install_dependencies
	download_files
	if check_sys packageManager yum; then
		config_firewall
	fi
	install_main
	generate_credentials
	config_shadowsocks
	install_cleanup
}


uninstall_shadowsocks_libev(){
	printf "Are you sure uninstall ${red}shadowsocks-libev and Cloak${plain}? [y/n]\n"
	read -p "(default: n):" answer
	[ -z ${answer} ] && answer="n"
	if [ "${answer}" == "y" ] || [ "${answer}" == "Y" ]; then
		${shadowsocks_libev_init} status > /dev/null 2>&1
		if [ $? -eq 0 ]; then
			${shadowsocks_libev_init} stop
		fi
		local service_name=$(basename ${shadowsocks_libev_init})
		if check_sys packageManager yum; then
			chkconfig --del ${service_name}
		elif check_sys packageManager apt; then
			update-rc.d -f ${service_name} remove
		fi
		rm -fr $(dirname ${shadowsocks_libev_config})
		rm -f /usr/local/bin/ss-local
		rm -f /usr/local/bin/ss-tunnel
		rm -f /usr/local/bin/ss-server
		rm -f /usr/local/bin/ss-manager
		rm -f /usr/local/bin/ss-redir
		rm -f /usr/local/bin/ss-nat
		rm -f /usr/local/bin/ck-client
		rm -f /usr/local/bin/ck-server
		rm -f /usr/local/lib/libshadowsocks-libev.a
		rm -f /usr/local/lib/libshadowsocks-libev.la
		rm -f /usr/local/include/shadowsocks.h
		rm -f /usr/local/lib/pkgconfig/shadowsocks-libev.pc
		rm -f /usr/local/share/man/man1/ss-local.1
		rm -f /usr/local/share/man/man1/ss-tunnel.1
		rm -f /usr/local/share/man/man1/ss-server.1
		rm -f /usr/local/share/man/man1/ss-manager.1
		rm -f /usr/local/share/man/man1/ss-redir.1
		rm -f /usr/local/share/man/man1/ss-nat.1
		rm -f /usr/local/share/man/man8/shadowsocks-libev.8
		rm -fr /usr/local/share/doc/shadowsocks-libev
		rm -f ${shadowsocks_libev_init}
		echo -e "[${green}Info${plain}] shadowsocks-libev uninstall success"
	else
		echo
		echo -e "[${green}Info${plain}] shadowsocks-libev uninstall cancelled, nothing to do..."
		echo
	fi
}

uninstall_shadowsocks(){

	if [ -f ${shadowsocks_libev_init} ]; then
		uninstall_shadowsocks_libev
	else
		echo -e "[${red}Error${plain}] shadowsocks-libev not installed, please check it and try again."
		echo
		exit 1
	fi
}

# Initialization step
action=$1
[ -z $1 ] && action=install
case "${action}" in
	install|uninstall)
		${action}_shadowsocks
		;;
	*)
		echo "Arguments error! [${action}]"
		echo "Usage: $(basename $0) [install|uninstall]"
		;;
esac

sudo apt-get install software-properties-common -y
sudo add-apt-repository ppa:longsleep/golang-backports
sudo apt-get update
sudo apt-get install golang-go

If you're using Ubuntu 16.04 LTS, 18.04 LTS or 18.10, then you can use the longsleep/golang-backports PPA and install Go 1.11

maybe add this to the script, it auto installs go 1.11

// Backports always has the most up to date go language

/bin/bash ../libtool   --mode=install /usr/bin/install -c ss-local ss-tunnel ss-server ss-manager ss-redir '/usr/local/bin'
libtool: install: /usr/bin/install -c ss-local /usr/local/bin/ss-local
libtool: install: /usr/bin/install -c ss-tunnel /usr/local/bin/ss-tunnel
libtool: install: /usr/bin/install -c ss-server /usr/local/bin/ss-server
libtool: install: /usr/bin/install -c ss-manager /usr/local/bin/ss-manager
libtool: install: /usr/bin/install -c ss-redir /usr/local/bin/ss-redir
 /bin/mkdir -p '/usr/local/bin'
 /usr/bin/install -c ss-nat '/usr/local/bin'
 /bin/mkdir -p '/usr/local/include'
 /usr/bin/install -c -m 644 shadowsocks.h '/usr/local/include'
make[2]: Leaving directory '/shadowsocks-libev-3.2.3/src'
make[1]: Leaving directory '/shadowsocks-libev-3.2.3/src'
make[1]: Entering directory '/shadowsocks-libev-3.2.3'
make[2]: Entering directory '/shadowsocks-libev-3.2.3'
make[2]: Nothing to be done for 'install-exec-am'.
 /bin/mkdir -p '/usr/local/lib/pkgconfig'
 /usr/bin/install -c -m 644 shadowsocks-libev.pc '/usr/local/lib/pkgconfig'
make[2]: Leaving directory '/shadowsocks-libev-3.2.3'
make[1]: Leaving directory '/shadowsocks-libev-3.2.3'
Cloning into 'Cloak'...
remote: Enumerating objects: 447, done.
remote: Counting objects: 100% (447/447), done.
remote: Compressing objects: 100% (233/233), done.
remote: Total 447 (delta 204), reused 426 (delta 190), pack-reused 0
Receiving objects: 100% (447/447), 85.97 KiB | 10.75 MiB/s, done.
Resolving deltas: 100% (204/204), done.
go build -ldflags "-X main.version=master(6fbd39e)" -o ./build/ck-server ./cmd/ck-server
cmd/ck-server/ck-server.go:17:2: cannot find package "github.com/cbeuw/Cloak/internal/multiplex" in any of:
        /usr/lib/go-1.11/src/github.com/cbeuw/Cloak/internal/multiplex (from $GOROOT)
        /root/go/src/github.com/cbeuw/Cloak/internal/multiplex (from $GOPATH)
cmd/ck-server/ck-server.go:18:2: cannot find package "github.com/cbeuw/Cloak/internal/server" in any of:
        /usr/lib/go-1.11/src/github.com/cbeuw/Cloak/internal/server (from $GOROOT)
        /root/go/src/github.com/cbeuw/Cloak/internal/server (from $GOPATH)
cmd/ck-server/ck-server.go:19:2: cannot find package "github.com/cbeuw/Cloak/internal/server/usermanager" in any of:
        /usr/lib/go-1.11/src/github.com/cbeuw/Cloak/internal/server/usermanager (from $GOROOT)
        /root/go/src/github.com/cbeuw/Cloak/internal/server/usermanager (from $GOPATH)
cmd/ck-server/ck-server.go:20:2: cannot find package "github.com/cbeuw/Cloak/internal/util" in any of:
        /usr/lib/go-1.11/src/github.com/cbeuw/Cloak/internal/util (from $GOROOT)
        /root/go/src/github.com/cbeuw/Cloak/internal/util (from $GOPATH)
cmd/ck-server/keygen.go:6:2: cannot find package "github.com/cbeuw/go-ecdh" in any of:
        /usr/lib/go-1.11/src/github.com/cbeuw/go-ecdh (from $GOROOT)
        /root/go/src/github.com/cbeuw/go-ecdh (from $GOPATH)
Makefile:13: recipe for target 'server' failed
make: *** [server] Error 1
mv build/ck-* /usr/local/bin
mv: cannot stat 'build/ck-*': No such file or directory
Makefile:16: recipe for target 'install' failed
make: *** [install] Error 1
[Error] Cloak for shadowsocks-libev install failed.

Change it to
github.com/cbeuw/Cloak/tree/master/internal/util

and so on...

you forgot tree/master

I'll look into the ppa part.

As for the cannot find package issue, I think it's because I used git clone instead of go get, so that the source has not been download to GOPATH. I'll edit it tomorrow

sounds good, looking forward to using this script on my own raspberry pi 3

// please update here once u fix it and ill try the script again, really excited for this

Sorry for the delay, my XPS 15 broke so I had to move to my old desktop :(

So because of how GOPATH works, it's all a bit awkward. What I did is that I made a temp GOPATH folder under the working directory of the script called tempgo and use go get to download all Cloak's dependency here, and in the end that temp folder gets deleted.

Regarding adding a ppa to apt in this script to install an up-to-date version of golang, I don't think that is a good idea because adding a ppa has global effect to the system which is not something everyone wants. Now realistically if the user wants to build both shadowsocks-libev and Cloak from source on their machine, they should be able to figure out how to install golang manually. Most users should just use the released binary instead (which I will produce once I finish most of the TODOs).