wg-easy port forward

compose.yaml

volumes:
  etc_wireguard:

networks:
  net_wireguard:
    driver: bridge
    ipam:
      config:
        - subnet: 172.18.0.0/16
          gateway: 172.18.0.1

services:
  wg-easy:
    environment:
      # Change Language:
      # (Supports: en, ua, ru, tr, no, pl, fr, de, ca, es, ko, vi, nl, is, pt, chs, cht, it, th, hi)
      LANG: en
      # ⚠ Required:
      # Change this to your host's public address
      WG_HOST: host_ip_or_domain
      PASSWORD_HASH: pw
      # Optional:
      # PORT: 51821
      # WG_PORT: 51820
      # WG_CONFIG_PORT: 92820
      # WG_DEFAULT_ADDRESS: 10.8.0.x
      WG_DEFAULT_DNS: internal_dns_server_ip
      # WG_PRE_UP: echo "Pre Up" > /etc/wireguard/pre-up.txt
      WG_POST_UP: >
        # iptables -A FORWARD -i wg0 -m iprange --src-range 10.8.0.2-10.8.0.10 -j ACCEPT;
        # iptables -A FORWARD -i wg0 -p tcp -d internal_dns_server_ip --dport 53 -j ACCEPT;
        # iptables -A FORWARD -i wg0 -p udp -d internal_dns_server_ip --dport 53 -j ACCEPT;
        # iptables -A FORWARD -i wg0 -d 10.8.0.0/24 -j DROP;
        # iptables -A FORWARD -i wg0 -d vps_ip -j DROP;
        iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE;
        iptables -t nat -A POSTROUTING -o wg+ -j MASQUERADE;

      # WG_PRE_DOWN: echo "Pre Down" > /etc/wireguard/pre-down.txt
      WG_POST_DOWN: >
        # iptables -D FORWARD -i wg0 -m iprange --src-range 10.8.0.2-10.8.0.10 -j ACCEPT;
        # iptables -D FORWARD -i wg0 -p tcp -d internal_dns_server_ip --dport 53 -j ACCEPT;
        # iptables -D FORWARD -i wg0 -p udp -d internal_dns_server_ip --dport 53 -j ACCEPT;
        # iptables -D FORWARD -i wg0 -d 10.8.0.0/24 -j DROP;
        # iptables -D FORWARD -i wg0 -d vps_ip -j DROP;
        iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE;
        iptables -t nat -D POSTROUTING -o wg+ -j MASQUERADE;

      # WG_MTU: 1420
      # WG_ALLOWED_IPS: 0.0.0.0/0, 10.0.10.0/24, 192.168.1.0/24
      # WG_PERSISTENT_KEEPALIVE: 25
      # WG_PRE_UP: echo "Pre Up" > /etc/wireguard/pre-up.txt
      # WG_POST_UP: echo "Post Up" > /etc/wireguard/post-up.txt
      # WG_PRE_DOWN: echo "Pre Down" > /etc/wireguard/pre-down.txt
      # WG_POST_DOWN: echo "Post Down" > /etc/wireguard/post-down.txt
      # UI_TRAFFIC_STATS: true
      # UI_CHART_TYPE: 1 # (0 Charts disabled, 1 # Line chart, 2 # Area chart, 3 # Bar chart)

    image: ghcr.io/wg-easy/wg-easy
    container_name: wg-easy
    volumes:
      - etc_wireguard:/etc/wireguard
    ports:
      - '51820:51820/udp'
      - '51821:51821/tcp'
    restart: unless-stopped
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
      # - NET_RAW # ⚠ Uncomment if using Podman
    sysctls:
      - net.ipv4.ip_forward=1
      - net.ipv4.conf.all.src_valid_mark=1
    networks:
      net_wireguard:
        ipv4_address: 172.18.0.2

Persist ip tables and ip route after reboot:

1. Persist IP tables:

   sudo netfilter-persistent save

2. Create IP route script:

   cd /usr/local/sbin
   sudo touch wireguard.sh
   sudo chmod u+x wireguard.sh
   sudo vim wireguard.sh

3. Copy paste below script to vim or nano:

   #!/bin/bash
   
   # Define the route details
   ROUTE="10.8.0.0/24"
   GATEWAY="172.18.0.2"
   
   # Check if the route already exists
   if ip route show $ROUTE | grep -q "via $GATEWAY"; then
       echo "Route $ROUTE via $GATEWAY already exists."
       exit 0
   else
       # Attempt to add the route
       if ip route add $ROUTE via $GATEWAY; then
           echo "Route $ROUTE via $GATEWAY added successfully."
           exit 0
       else
           echo "Wireguard container is not running yet. Restarting in 5 seconds."
           exit 1
       fi
   fi

4. Create systemctl service:

   sudo vim /etc/systemd/system/wireguard.service

5. Copy paste below service file:

   [Unit]
   Description=Expose wireguard peer to host
   After=network.target
   
   [Service]
   Type=oneshot
   ExecStart=/usr/local/sbin/wireguard.sh
   Restart=on-failure
   RestartSec=5
   RemainAfterExit=yes
   
   [Install]
   WantedBy=multi-user.target

6. Run service and make sure it is running:

   sudo systemctl daemon-reload
   sudo systemctl enable wireguard
   sudo systemctl start wireguard
   sudo systemctl status wireguard

7. All done, now you can reboot without issue.