cdenneen

require 'rspec'
require 'facter'

describe 'facter_value' do
  context 'when stubbing Facter::Util::Collection#fact' do
    before(:each) do
      stub_fact = instance_double(Facter::Util::Fact, :value => 'foo')
      allow(Facter.collection).to receive(:fact).with(:test_fact).and_return(stub_fact)
    end

cdenneen

---
.cache_bundler: &cache_bundler
  cache:
    untracked: true
    key: "$CI_BUILD_REF_NAME"
    paths:
      - '.vendor'
      - 'vendor'

.setup_bundler_env: &setup_bundler_env

cdenneen

How to automatically start ssh server on boot on Windows Subsystem for Linux

Microsoft partnered with Canonical to create Bash on Ubuntu on Windows, running through a technology called the Windows Subsystem for Linux. Below are instructions on how to set up the ssh server to run automatically at boot.

1. Uninstall and reinstall the ssh server using the following commands:
   1. sudo apt remove openssh-server
   2. sudo apt install openssh-server
2. Edit the /etc/ssh/sshd_config file by running the command sudo vi /etc/ssh/sshd_config and do the following
   1. Change Port to 2222 (or any other port above 1000)
3. Change UsePrivilegeSeparation to no

cdenneen

## Please set the ROOT to the folder your nxlog was installed into,
## otherwise it will not start.
  
#define ROOT C:\Program Files\nxlog
define ROOT C:\Program Files (x86)\nxlog
define ROOT_STRING C:\Program Files (x86)\\nxlog
  
Moduledir %ROOT%\modules
CacheDir %ROOT%\data
Pidfile %ROOT%\data\nxlog.pid