Skip to content

Instantly share code, notes, and snippets.

@ceremcem

ceremcem/stdin

Created August 27, 2018 23:40
Show Gist options
  • Save ceremcem/55a219f4c46781c1d4d58e0659500c96 to your computer and use it in GitHub Desktop.
Save ceremcem/55a219f4c46781c1d4d58e0659500c96 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
stdin
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-7-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: S240K8R7
LU WWN Device Id: 5 000c50 051c9630e
Firmware Version: CC9F
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Aug 28 02:40:12 2018 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 238) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3081) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 092 085 006 - 230723283
3 Spin_Up_Time PO---- 093 092 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 315
5 Reallocated_Sector_Ct PO--CK 070 051 036 - 40472
7 Seek_Error_Rate POSR-- 081 060 030 - 129804110
9 Power_On_Hours -O--CK 084 084 000 - 14674
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 291
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 4548
188 Command_Timeout -O--CK 100 098 000 - 8 13 14
189 High_Fly_Writes -O-RCK 001 001 000 - 359
190 Airflow_Temperature_Cel -O---K 059 034 045 Past 41 (Min/Max 40/42 #2196)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 259
193 Load_Cycle_Count -O--CK 095 095 000 - 11698
194 Temperature_Celsius -O---K 041 066 000 - 41 (0 14 0 0 0)
197 Current_Pending_Sector -O--C- 070 069 000 - 5000
198 Offline_Uncorrectable ----C- 070 069 000 - 5000
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 5731h+12m+47.031s
241 Total_LBAs_Written ------ 100 253 000 - 4319033854268
242 Total_LBAs_Read ------ 100 253 000 - 63966471364566
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5067 Device vendor specific log
0xbd GPL VS 512 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 489 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 489 [8] occurred at disk power-on lifetime: 14670 hours (611 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 71 00 04 00 00 00 32 00 91 e0 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 03 c0 45 8f a0 00 3d+01:55:22.880 FLUSH CACHE EXT
ca 00 00 00 a0 00 00 03 7b ae 00 e3 00 3d+01:55:22.879 WRITE DMA
ca 00 00 00 20 00 00 03 5b ae 80 e3 00 3d+01:55:22.879 WRITE DMA
ca 00 00 00 80 00 00 03 5b ae 00 e3 00 3d+01:55:22.879 WRITE DMA
ca 00 00 00 80 00 00 03 5b ad 80 e3 00 3d+01:55:22.878 WRITE DMA
Error 488 [7] occurred at disk power-on lifetime: 14626 hours (609 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 03 bb 9c 80 00 00 Error: UNC at LBA = 0x03bb9c80 = 62626944
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 03 bb 9c 80 e3 00 1d+05:46:33.823 READ DMA
ca 00 00 00 08 00 00 01 e7 c8 00 e1 00 1d+05:46:30.933 WRITE DMA
ea 00 00 00 00 00 00 22 2a 5e f7 a0 00 1d+05:46:30.906 FLUSH CACHE EXT
35 00 00 00 08 00 00 21 e5 c8 00 e0 00 1d+05:46:30.906 WRITE DMA EXT
ca 00 00 00 08 00 00 01 e5 c8 80 e1 00 1d+05:46:30.905 WRITE DMA
Error 487 [6] occurred at disk power-on lifetime: 14626 hours (609 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 03 bb 9c 80 00 00 Error: UNC at LBA = 0x03bb9c80 = 62626944
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 03 bb 9c 80 e3 00 1d+05:45:01.439 READ DMA
c8 00 00 00 08 00 00 03 ba a5 98 e3 00 1d+05:45:01.439 READ DMA
c8 00 00 00 08 00 00 03 ba 9e c0 e3 00 1d+05:45:01.436 READ DMA
c8 00 00 00 08 00 00 03 bc 31 b8 e3 00 1d+05:45:01.432 READ DMA
c8 00 00 00 08 00 00 03 bc 2c 90 e3 00 1d+05:45:01.430 READ DMA
Error 486 [5] occurred at disk power-on lifetime: 14626 hours (609 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 03 bb 9c 80 00 00 Error: UNC at LBA = 0x03bb9c80 = 62626944
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 03 bb 9c 80 e3 00 1d+05:44:58.506 READ DMA
c8 00 00 00 08 00 00 03 bb 86 d0 e3 00 1d+05:44:58.506 READ DMA
c8 00 00 00 08 00 00 03 bb 33 08 e3 00 1d+05:44:58.506 READ DMA
c8 00 00 00 08 00 00 03 ba de d8 e3 00 1d+05:44:58.501 READ DMA
c8 00 00 00 08 00 00 03 ba d8 80 e3 00 1d+05:44:58.494 READ DMA
Error 485 [4] occurred at disk power-on lifetime: 14358 hours (598 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 47 65 28 00 00 Error: UNC at LBA = 0x02476528 = 38233384
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 02 47 65 28 e2 00 7d+02:26:15.834 READ DMA
c8 00 00 00 20 00 00 01 fa 04 20 e1 00 7d+02:26:15.820 READ DMA
ca 00 00 00 20 00 00 03 42 49 30 e3 00 7d+02:26:15.819 WRITE DMA
ca 00 00 00 08 00 00 03 42 37 a8 e3 00 7d+02:26:15.819 WRITE DMA
ca 00 00 00 08 00 00 03 42 33 98 e3 00 7d+02:26:15.819 WRITE DMA
Error 484 [3] occurred at disk power-on lifetime: 14358 hours (598 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 47 65 28 00 00 Error: UNC at LBA = 0x02476528 = 38233384
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 02 47 65 28 e2 00 7d+02:26:12.815 READ DMA
c8 00 00 00 08 00 00 02 47 65 20 e2 00 7d+02:26:12.814 READ DMA
c8 00 00 00 08 00 00 02 47 65 08 e2 00 7d+02:26:12.811 READ DMA
c8 00 00 00 08 00 00 02 47 65 00 e2 00 7d+02:26:12.788 READ DMA
c8 00 00 00 08 00 00 03 15 82 80 e3 00 7d+02:26:12.788 READ DMA
Error 483 [2] occurred at disk power-on lifetime: 14358 hours (598 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 02 47 65 28 00 00 Error: UNC at LBA = 0x02476528 = 38233384
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 04 00 00 00 02 47 64 00 e0 00 7d+02:26:09.586 READ DMA EXT
c8 00 00 00 10 00 00 03 15 82 70 e3 00 7d+02:26:09.583 READ DMA
25 00 00 04 00 00 00 02 47 60 00 e0 00 7d+02:26:09.577 READ DMA EXT
c8 00 00 00 08 00 00 03 15 7e 20 e3 00 7d+02:26:09.576 READ DMA
25 00 00 04 00 00 00 02 47 5c 00 e0 00 7d+02:26:09.574 READ DMA EXT
Error 482 [1] occurred at disk power-on lifetime: 14345 hours (597 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 03 15 c3 58 00 00 Error: UNC at LBA = 0x0315c358 = 51757912
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 03 15 c3 58 e3 00 6d+13:31:24.909 READ DMA
c8 00 00 00 08 00 00 03 1b d0 c8 e3 00 6d+13:31:24.907 READ DMA
c8 00 00 00 08 00 00 03 1b d0 60 e3 00 6d+13:31:24.900 READ DMA
c8 00 00 00 08 00 00 03 1b d0 28 e3 00 6d+13:31:24.900 READ DMA
c8 00 00 00 08 00 00 03 1b d0 00 e3 00 6d+13:31:24.900 READ DMA
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 40/42 Celsius
Lifetime Min/Max Temperature: 14/66 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment