Skip to content

Instantly share code, notes, and snippets.

@ceremcem

ceremcem/stdin

Created August 28, 2018 00:51
Show Gist options
  • Save ceremcem/5ea2dfaac096e3107a4086864a21b832 to your computer and use it in GitHub Desktop.
Save ceremcem/5ea2dfaac096e3107a4086864a21b832 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
stdin
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-7-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA (AF)
Device Model: WDC WD5000BPVT-22HXZT1
Serial Number: WD-WXM1AC027188
LU WWN Device Id: 5 0014ee 2b01ee098
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Aug 28 03:50:37 2018 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM level is: 96 (intermediate level with standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 136) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 164 149 021 - 2800
4 Start_Stop_Count -O--CK 001 001 000 - 199637
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 081 081 000 - 14361
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 368
191 G-Sense_Error_Rate -O--CK 001 001 000 - 6491
192 Power-Off_Retract_Count -O--CK 200 200 000 - 306
193 Load_Cycle_Count -O--CK 001 001 000 - 3065360
194 Temperature_Celsius -O---K 108 092 000 - 39
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Stand-by (1)
Current Temperature: 39 Celsius
Power Cycle Min/Max Temperature: 38/40 Celsius
Lifetime Min/Max Temperature: 24/55 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (55)
Index Estimated Time Temperature Celsius
56 2018-08-28 01:43 38 *******************
... ..( 6 skipped). .. *******************
63 2018-08-28 01:50 38 *******************
64 2018-08-28 01:51 39 ********************
65 2018-08-28 01:52 38 *******************
... ..( 3 skipped). .. *******************
69 2018-08-28 01:56 38 *******************
70 2018-08-28 01:57 39 ********************
71 2018-08-28 01:58 38 *******************
... ..( 22 skipped). .. *******************
94 2018-08-28 02:21 38 *******************
95 2018-08-28 02:22 39 ********************
96 2018-08-28 02:23 38 *******************
... ..( 6 skipped). .. *******************
103 2018-08-28 02:30 38 *******************
104 2018-08-28 02:31 39 ********************
105 2018-08-28 02:32 38 *******************
... ..( 3 skipped). .. *******************
109 2018-08-28 02:36 38 *******************
110 2018-08-28 02:37 ? -
111 2018-08-28 02:38 38 *******************
112 2018-08-28 02:39 38 *******************
113 2018-08-28 02:40 39 ********************
114 2018-08-28 02:41 38 *******************
115 2018-08-28 02:42 39 ********************
116 2018-08-28 02:43 38 *******************
117 2018-08-28 02:44 39 ********************
... ..( 5 skipped). .. ********************
123 2018-08-28 02:50 39 ********************
124 2018-08-28 02:51 38 *******************
125 2018-08-28 02:52 39 ********************
126 2018-08-28 02:53 39 ********************
127 2018-08-28 02:54 38 *******************
0 2018-08-28 02:55 38 *******************
1 2018-08-28 02:56 39 ********************
2 2018-08-28 02:57 39 ********************
3 2018-08-28 02:58 39 ********************
4 2018-08-28 02:59 38 *******************
5 2018-08-28 03:00 38 *******************
6 2018-08-28 03:01 39 ********************
7 2018-08-28 03:02 38 *******************
8 2018-08-28 03:03 38 *******************
9 2018-08-28 03:04 39 ********************
... ..( 8 skipped). .. ********************
18 2018-08-28 03:13 39 ********************
19 2018-08-28 03:14 40 *********************
20 2018-08-28 03:15 39 ********************
21 2018-08-28 03:16 39 ********************
22 2018-08-28 03:17 39 ********************
23 2018-08-28 03:18 40 *********************
24 2018-08-28 03:19 39 ********************
25 2018-08-28 03:20 39 ********************
26 2018-08-28 03:21 40 *********************
27 2018-08-28 03:22 39 ********************
28 2018-08-28 03:23 40 *********************
... ..( 5 skipped). .. *********************
34 2018-08-28 03:29 40 *********************
35 2018-08-28 03:30 39 ********************
36 2018-08-28 03:31 40 *********************
... ..( 15 skipped). .. *********************
52 2018-08-28 03:47 40 *********************
53 2018-08-28 03:48 39 ********************
54 2018-08-28 03:49 40 *********************
55 2018-08-28 03:50 40 *********************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 11504 Vendor specific
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment