Created
July 2, 2014 01:57
-
-
Save cheecheeo/734244476e485eb27e02 to your computer and use it in GitHub Desktop.
Share Anything
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| (************************************) | |
| (* Never edit options files when *) | |
| (* the daemon is running *) | |
| (************************************) | |
| (* SECTION : Main *) | |
| (* Main options *) | |
| (************************************) | |
| (* small name of client *) | |
| client_name = nlgahe | |
| (************************************) | |
| (* SECTION : Interfaces *) | |
| (* Options to control ports used by mldonkey interfaces *) | |
| (************************************) | |
| (* list of IP address allowed to connect to the core via telnet/GUI/WEB | |
| for internal command set: list separated by spaces | |
| example for internal command: set allowed_ips "127.0.0.0/8 192.168.1.2" | |
| or for editing the ini-file: list separated by semi-colon | |
| example for ini-file: allowed_ips = [ "127.0.0.0/8"; "192.168.1.2";] | |
| CIDR and range notations are supported: ie use 192.168.0.0/24 | |
| or 192.168.0.0-192.168.0.255 for 192.168.0.* *) | |
| allowed_ips = [ | |
| "127.0.0.1";] | |
| (* port for Graphical Interfaces, 0 to deactivate GUI interface *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| gui_port = 4001 | |
| (* port for GiFT Graphical Interfaces interaction. It was 1213, but the default is | |
| now 0 for disabled, because it does not check for a password. *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| gift_port = 0 | |
| (* The port used to connect to your client with a web browser, 0 to deactivate web interface *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| http_port = 4080 | |
| (* port for user interaction, 0 to deactivate telnet interface *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| telnet_port = 4000 | |
| (* Aliases to commands. The alias (fist string) has to be | |
| whitespaceless, the outcome of the alias (second string) | |
| may have spaces (put it in quotation then). *) | |
| alias_commands = [ | |
| (quit, q); | |
| (exit, q);] | |
| (* upnp port forwarding *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| upnp_port_forwarding = false | |
| (* clear all upnp port forwarding before mldonkey exit *) | |
| clear_upnp_port_at_exit = true | |
| (************************************) | |
| (* SECTION : Bandwidth *) | |
| (* Bandwidth options *) | |
| (************************************) | |
| (* The maximal upload rate you can tolerate on your link in kBytes/s (0 = no limit) | |
| The limit will apply on all your connections (clients and servers) and both | |
| control and data messages. *) | |
| max_hard_upload_rate = 10 | |
| (* The maximal download rate you can tolerate on your link in kBytes/s (0 = no limit) | |
| The limit will apply on all your connections (clients and servers) and both | |
| control and data messages. Maximum value depends on max_hard_upload_rate: | |
| >= 10 -> unlimited download | |
| < 10 > 3 -> download limited to upload * 4 | |
| < 4 -> download limited to upload * 3 *) | |
| max_hard_download_rate = 50 | |
| (* Second maximal upload rate for easy toggling (use bw_toggle) *) | |
| max_hard_upload_rate_2 = 5 | |
| (* Second maximal download rate for easy toggling (use bw_toggle) *) | |
| max_hard_download_rate_2 = 20 | |
| (* Maximal number of opened connections *) | |
| max_opened_connections = 200 | |
| (* Second maximal number of opened connections for easy toggling (use bw_toggle) *) | |
| max_opened_connections_2 = 100 | |
| (* Amount of indirect connections in percent (min 30, max 70) of max_opened_connections *) | |
| max_indirect_connections = 30 | |
| (* How many slots can be used for upload, minimum 3 *) | |
| max_upload_slots = 5 | |
| (* How many percent of upload slots can be used for downloading files | |
| tagged as release, maximum 75% *) | |
| max_release_slots = 20 | |
| (* Set aside a single reserved slot to upload to friends *) | |
| friends_upload_slot = true | |
| (* Maximum file size to benefit from the reserved slot for small files (0 to disable) *) | |
| small_files_slot_limit = 10240 | |
| (* Set this to true if you want to have dynamic upload slot allocation (experimental) *) | |
| dynamic_slots = false | |
| (* Maximal number of connections that can be opened per second *) | |
| max_connections_per_second = 5 | |
| (* list of IP addresses allowed to connect to the core with no limit on | |
| upload/download and upload slots. List separated by spaces, wildcard=255 | |
| ie: use 192.168.0.255 for 192.168.0.* *) | |
| nolimit_ips = [ | |
| "127.0.0.1";] | |
| (* This option enables MLdonkey to always read as much data as possible | |
| from a channel, but use more CPU as it must then copy the data in the | |
| channel buffer. *) | |
| copy_read_buffer = true | |
| (************************************) | |
| (* SECTION : Networks *) | |
| (* Networks options *) | |
| (************************************) | |
| (* Set to true if you also want mldonkey to run as an overnet client | |
| (enable_donkey must be true) *) | |
| enable_overnet = false | |
| (* Set to true if you also want mldonkey to run as an kademlia client | |
| (enable_donkey must be true, and only experimental) *) | |
| enable_kademlia = false | |
| (* Set to true if you want mldonkey to connect to edonkey servers | |
| (enable_donkey must be true, and only experimental) *) | |
| enable_servers = true | |
| (* Set to true if you also want mldonkey to run as an Bittorrent client *) | |
| enable_bittorrent = true | |
| (* Set to true if you also want mldonkey to run as a donkey client *) | |
| enable_donkey = false | |
| (* Set to true if you also want mldonkey to run as a napster client (experimental) *) | |
| enable_opennap = false | |
| (* Set to true if you also want mldonkey to run as a soulseek client (experimental) *) | |
| enable_soulseek = false | |
| (* Set to true if you also want mldonkey to run as a gnutella1 sub node (experimental) *) | |
| enable_gnutella = false | |
| (* Set to true if you also want mldonkey to run as a gnutella2 sub node (experimental) *) | |
| enable_gnutella2 = false | |
| (* Set to true if you also want mldonkey to run as a Fasttrack sub node (experimental) *) | |
| enable_fasttrack = false | |
| (* Set to true if you also want mldonkey to run as a direct-connect node (experimental) *) | |
| enable_directconnect = false | |
| (* Set to true if you also want mldonkey to download HTTP files (experimental) *) | |
| enable_fileTP = false | |
| (************************************) | |
| (* SECTION : Network Config *) | |
| (* Network config options *) | |
| (************************************) | |
| (* The last IP address used for this client *) | |
| client_ip = "127.0.0.1" | |
| (* Use the IP specified by 'client_ip' instead of trying to determine it | |
| ourself. Don't set this option to true if you have dynamic IP. *) | |
| force_client_ip = false | |
| (* Use http://ip.discoveryvip.com/ip.asp to obtain WAN IP *) | |
| discover_ip = true | |
| (* User agent string (default = "default") *) | |
| user_agent = default | |
| (* A list of lines to download on the WEB: each line has | |
| the format: (kind, period, url), where kind is either | |
| 'server.met' for a server.met file (also in gz/bz2/zip format) | |
| containing ed2k server, or | |
| 'comments.met' for a file of comments, or | |
| 'guarding.p2p' for a blocklist file (also in gz/bz2/zip format), or | |
| 'ocl' for file in the ocl format containing overnet peers, or | |
| 'contact.dat' for an contact.dat file containing overnet peers, | |
| 'nodes.gzip' for a fasttrack nodes.gzip, | |
| 'hublist' for DirectConnect hubs list, | |
| and period is the period between updates (in hours), | |
| a period of zero means the file is only loaded once on startup, | |
| and url is the url of the file to download. | |
| IMPORTANT: Put the URL and the kind between quotes. | |
| EXAMPLE: | |
| web_infos = [ | |
| ("server.met", 0, "http://www.gruk.org/server.met.gz"); | |
| ("hublist", 0, "http://dchublist.com/hublist.xml.bz2"); | |
| ("guarding.p2p", 96, "http://www.bluetack.co.uk/config/level1.gz"); | |
| ("ocl", 24, "http://members.lycos.co.uk/appbyhp2/FlockHelpApp/contact-files/contact.ocl"); | |
| ("contact.dat", 168, "http://download.overnet.org/contact.dat"); | |
| ("geoip.dat", 168, "http://www.maxmind.com/download/geoip/database/GeoLiteCountry/GeoIP.dat.gz"); | |
| ] | |
| *) | |
| web_infos = [ | |
| ("geoip.dat", 0, "http://www.maxmind.com/download/geoip/database/GeoLiteCountry/GeoIP.dat.gz"); | |
| ("guarding.p2p", 96, "http://www.bluetack.co.uk/config/level1.gz"); | |
| ("server.met", 0, "http://www.gruk.org/server.met.gz"); | |
| (hublist, 0, "http://dchublist.com/hublist.config.bz2"); | |
| ("nodes.gzip", 0, "http://update.kceasy.com/update/fasttrack/nodes.gzip");] | |
| (* Cookies send with a http request (used for .torrent files and web_infos) *) | |
| referers = [ | |
| (".*suprnova.*", "http://www.suprnova.org/");] | |
| (* Cookies send with a http request (used for .torrent files and web_infos) *) | |
| cookies = [] | |
| (* Direct HTTP queries to HTTP proxy *) | |
| http_proxy_server = "" | |
| (* Port of HTTP proxy *) | |
| http_proxy_port = 8080 | |
| (* HTTP proxy login (leave empty if proxy doesn't require authentication) *) | |
| http_proxy_login = "" | |
| (* HTTP proxy password *) | |
| http_proxy_password = "" | |
| (* Direct TCP connections to HTTP proxy (the proxy should support CONNECT) *) | |
| http_proxy_tcp = false | |
| (************************************) | |
| (* SECTION : HTML mods *) | |
| (* Options to configure HTML mode *) | |
| (************************************) | |
| (* bw_stats refresh delay (seconds) *) | |
| html_mods_bw_refresh_delay = 11 | |
| (* html_mods_theme to use (located in relative html_themes/<theme_name> directory | |
| leave blank to use internal theme *) | |
| html_mods_theme = "" | |
| (************************************) | |
| (* SECTION : Download *) | |
| (* Download options *) | |
| (************************************) | |
| (* Set to false if you don't want mldonkey to automatically put completed files | |
| in incoming directory *) | |
| auto_commit = true | |
| (* Set to true if you want all new downloads be paused immediatly | |
| will be set to false on core start. *) | |
| pause_new_downloads = false | |
| (* Set to true if you want to activate the release slot feature for all new downloads. *) | |
| release_new_downloads = false | |
| (* The maximal number of files in Downloading state (other ones are Queued) *) | |
| max_concurrent_downloads = 50 | |
| (* The maximal length of zero bytes between non-zero bytes in a file that | |
| should be interpreted as downloaded during a recovery *) | |
| max_recover_zeroes_gap = 16 | |
| (* A command that is called when a file is committed, does not work on MinGW. | |
| Arguments are (kept for compatibility): | |
| $1 - temp file name, without path | |
| $2 - file size | |
| $3 - filename of the committed file | |
| Also these environment variables can be used (preferred way): | |
| $TEMPNAME - temp file name, including path | |
| $FILEID - same as $1 | |
| $FILESIZE - same as $2 | |
| $FILENAME - same as $3 | |
| $FILEHASH - internal hash | |
| $DURATION - download duration | |
| $INCOMING - directory used for commit | |
| $NETWORK - network used for downloading | |
| $ED2K_HASH - ed2k hash if MD4 is known | |
| $FILE_OWNER - user who started the download | |
| $FILE_GROUP - group the file belongs to | |
| $USER_MAIL - mail address of file_owner | |
| *) | |
| file_completed_cmd = "" | |
| (* The command which is called when a download is started. Arguments | |
| are '-file <num>' | |
| Also these environment variables can be used (preferred way): | |
| $TEMPNAME - temp file name, including path | |
| $FILEID - same as $1 | |
| $FILESIZE - same as $2 | |
| $FILENAME - same as $3 | |
| $FILEHASH - internal hash | |
| $NETWORK - network used for downloading | |
| $ED2K_HASH - ed2k hash if MD4 is known | |
| $FILE_OWNER - user who started the download | |
| $FILE_GROUP - group the file belongs to | |
| $USER_MAIL - mail address of file_owner | |
| *) | |
| file_started_cmd = "" | |
| (************************************) | |
| (* SECTION : Startup *) | |
| (* Startup options *) | |
| (************************************) | |
| (* The login of the user you want mldonkey to run as, after the ports | |
| have been bound (can be used not to run with root privileges when | |
| a port < 1024 is needed) *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| run_as_user = "" | |
| (* The UID of the user (0=disabled) you want mldonkey to run as, after the ports | |
| have been bound (can be used not to run with root privileges when | |
| a port < 1024 is needed) *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| run_as_useruid = 0 | |
| (* The group of run_as_user user to be used *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| run_as_group = "" | |
| (* The group of run_as_user user to be used *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| run_as_groupgid = 0 | |
| (* Ask for GUI start *) | |
| ask_for_gui = false | |
| (* Automatically Start the GUI *) | |
| start_gui = false | |
| (* Should MLdonkey try to recover downloads of files in temp/ at startup *) | |
| recover_temp_on_startup = true | |
| (************************************) | |
| (* SECTION : Mail *) | |
| (* Mail options *) | |
| (************************************) | |
| (* The mail server you want to use (must be SMTP). Use hostname or IP address *) | |
| smtp_server = "127.0.0.1" | |
| (* The port to use on the mail server (default 25) *) | |
| smtp_port = 25 | |
| (* Login to use for SMTP authentication (leave empty to disable). LOGIN, PLAIN and CRAM-MD5 methods are supported *) | |
| smtp_login = "" | |
| (* Password to use for SMTP authentication *) | |
| smtp_password = "" | |
| (* Email address to receive notifications when downloads are completed or disk is full (leave empty to disable, separate multiple addresses with space) *) | |
| mail = "" | |
| (* Set to false if your mail server cannot handle angle-brackets around addresses (RFC 5321) *) | |
| add_mail_brackets = true | |
| (* Send filename in mail subject *) | |
| filename_in_subject = true | |
| (* Put a prefix for the filename here which shows up in the notification mail *) | |
| url_in_mail = "" | |
| (************************************) | |
| (* SECTION : Paths *) | |
| (* Paths options *) | |
| (************************************) | |
| (* The directory where temporary files should be put *) | |
| temp_directory = temp | |
| (* How often (in minutes) should MLDonkey scan all shared directories for new/removed files. | |
| Minimum 5, 0 to disable. Use command reshare to manually scan shares. | |
| When core starts, shared directories are scanned once, independent of this option. *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| share_scan_interval = 30 | |
| (* New download files are created with these rights (in octal) *) | |
| create_file_mode = 664 | |
| (* New directories in incoming_directories are created with these rights (in octal) *) | |
| create_dir_mode = 755 | |
| (* Create new files as sparse (not supported on FAT volumes) *) | |
| create_file_sparse = true | |
| (* Mininum free space in MB on temp_directory, minimum 50 *) | |
| hdd_temp_minfree = 50 | |
| (* If true core shuts down when free space on temp dir is below hdd_temp_minfree, | |
| otherwise all downloads are paused and a warning email is sent. *) | |
| hdd_temp_stop_core = false | |
| (* Mininum free space in MB on core directory, minimum 20 *) | |
| hdd_coredir_minfree = 50 | |
| (* If true core shuts down when free space on core dir is below hdd_coredir_minfree, | |
| otherwise all downloads are paused and a warning email is sent. *) | |
| hdd_coredir_stop_core = true | |
| (* Send a warning mail each <interval> hours for each directory, 0 to deactivate mail warnings. *) | |
| hdd_send_warning_interval = 1 | |
| (* Use UTF-8 for filenames (instead of automatic locale detection). *) | |
| filenames_utf8 = false | |
| (* Incoming and shared directories. | |
| At least two entries have to be present here, one with strategy | |
| incoming_files and one with strategy incoming_directories. | |
| Both entries can point to the same directory. | |
| If one of the two strategies is missing, MLDonkey will create a default | |
| directory with its entry here. | |
| Finished BT multifile downloads are committed to the first directory | |
| with strategy incoming_directories. Other downloads are committed | |
| to the first directory with the strategy incoming_files. | |
| MLdonkey searches all shared_directories with incoming_* strategies | |
| on commit and uses the first one with enough free diskspace. | |
| Other strategies can be found in searches.ini, section customized_sharing. *) | |
| shared_directories = [ | |
| { dirname = shared | |
| strategy = all_files | |
| priority = 0 | |
| }; | |
| { dirname = "incoming/files" | |
| strategy = incoming_files | |
| priority = 0 | |
| }; | |
| { dirname = "incoming/directories" | |
| strategy = incoming_directories | |
| priority = 0 | |
| };] | |
| (************************************) | |
| (* SECTION : Security *) | |
| (* Security options *) | |
| (************************************) | |
| (* Commands that you are allowed to be call from the interface. These | |
| commands should short, so that the core is not blocked more than necessary. *) | |
| allowed_commands = [ | |
| (df, df); | |
| (ls, "ls incoming");] | |
| (* Allow you to use any command with ! in the interface instead of only the | |
| ones in allowed_commands *) | |
| allow_any_command = false | |
| (* Allow others to browse our share list (0: none, 1: friends only, 2: everyone *) | |
| allow_browse_share = 1 | |
| (* Regexp of messages to filter out, example: string1|string2|string3 *) | |
| messages_filter = "DI-Emule|ZamBoR|Ketamine|eMule FX|AUTOMATED MESSAGE|Hi Honey!|Do you live in my area|download HyperMule" | |
| (* Regexp of comments to filter out, example: string1|string2|string3 *) | |
| comments_filter = "http://|https://|www\\." | |
| (************************************) | |
| (* SECTION : Other *) | |
| (* Other options *) | |
| (************************************) | |
| (* (experimental) *) | |
| save_results = 0 | |
| (* Buffer writes and flush after buffer_writes_delay seconds (experimental) *) | |
| buffer_writes = false | |
| (* build statistics about eMule mods *) | |
| emule_mods_count = false | |
| (* show all eMule mods in statistics *) | |
| emule_mods_showall = false | |
| (* How often (in hours) should a backup of the ini files be written into old_config. | |
| A value of zero means that a backup is written only when the core shuts down. *) | |
| backup_options_delay = 0 | |
| (* Define the total number of options archives in old_config. *) | |
| backup_options_generations = 10 | |
| (* Define the format of the archive, zip or tar.gz are valid. *) | |
| backup_options_format = "tar.gz" | |
| (* The maximum time in seconds to wait for networks to cleanly shutdown. *) | |
| shutdown_timeout = 3 | |
| (* The IP address used to bind the p2p clients *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| client_bind_addr = "0.0.0.0" | |
| (*****************************************************************) | |
| (* *) | |
| (* ADVANCED OPTIONS *) | |
| (* *) | |
| (* All the options after this line are for the expert *) | |
| (* user. Do not modify them if you are not sure. *) | |
| (* *) | |
| (*****************************************************************) | |
| (************************************) | |
| (* SECTION : Interfaces FOR EXPERTS *) | |
| (* Options to control ports used by mldonkey interfaces *) | |
| (************************************) | |
| (* The IP address used to bind the http server *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| http_bind_addr = "0.0.0.0" | |
| (* The IP address used to bind the gui server *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| gui_bind_addr = "0.0.0.0" | |
| (* The IP address used to bind the telnet server *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| telnet_bind_addr = "0.0.0.0" | |
| (* Should *all* sources for a file be shown on HTML/telnet vd <num> *) | |
| print_all_sources = true | |
| (* Improved telnet interface *) | |
| improved_telnet = true | |
| (* A space-separated list of keywords. Each keyword triggers | |
| printing information on the corresponding messages: | |
| verb : verbose mode (interesting not only for coders) | |
| mc : debug client messages | |
| mr|raw : debug raw messages | |
| mct : debug emule clients tags | |
| ms : debug server messages | |
| sm : debug source management | |
| net : debug net | |
| gui : debug gui | |
| no-login : disable login messages | |
| file : debug file handling | |
| do : some download warnings | |
| up : some upload warnings | |
| unk : unknown messages | |
| ov : overnet | |
| loc : debug source research/master servers | |
| share: debug sharing | |
| md4 : md4 computation | |
| connect : debug connections | |
| udp : udp messages | |
| ultra|super : debug supernode | |
| swarming : debug swarming | |
| hc : http_client messages | |
| hs : http_server messages | |
| com : commands by non-admin users | |
| act : debug activity | |
| bw : debug bandwidth | |
| geo : debug GeoIP | |
| unexp : debug unexpected messages | |
| dht : debug DHT *) | |
| verbosity = "" | |
| (************************************) | |
| (* SECTION : Bandwidth FOR EXPERTS *) | |
| (* Bandwidth options *) | |
| (************************************) | |
| (* The delay in milliseconds to wait in the event loop. Can be decreased to | |
| increase the bandwidth usage, or increased to lower the CPU usage. *) | |
| loop_delay = 5 | |
| (************************************) | |
| (* SECTION : Networks FOR EXPERTS *) | |
| (* Networks options *) | |
| (************************************) | |
| (* Set to true if you also want mldonkey to run as a OpenFT sub node (experimental) *) | |
| enable_openft = false | |
| (************************************) | |
| (* SECTION : Network Config FOR EXPERTS *) | |
| (* Network config options *) | |
| (************************************) | |
| (* URLs of RSS feeds *) | |
| rss_feeds = [] | |
| (* If MLDonkey can not read broken RSS feeds, use this program to preprocess them *) | |
| rss_preprocessor = xmllint | |
| (* Keep IP blocking ranges descriptions in memory *) | |
| ip_blocking_descriptions = false | |
| (* IP blocking list filename (peerguardian format), can also be in gz/bz2/zip format | |
| Zip files must contain either a file named guarding.p2p or guarding_full.p2p. *) | |
| ip_blocking = "" | |
| (* List of countries to block connections from/to (requires Geoip). | |
| Names are in ISO 3166 format, see http://www.maxmind.com/app/iso3166 | |
| You can also at your own risk use "Unknown" for IPs Geoip won't recognize. *) | |
| ip_blocking_countries = [] | |
| (* false: use ip_blocking_countries as block list, all other countries are allowed | |
| true: use ip_blocking_countries as allow list, all other countries are blocked *) | |
| ip_blocking_countries_block = false | |
| (* Location of GeoIP.dat (Get one from http://www.maxmind.com/download/geoip/database/) *) | |
| geoip_dat = "" | |
| (* The size of the header of a TCP/IP packet on your connection (ppp adds | |
| 14 bytes sometimes, so modify to take that into account) *) | |
| tcpip_packet_size = 40 | |
| (* The size of the MTU of a TCP/IP packet on your connection *) | |
| mtu_packet_size = 1500 | |
| (* The size of the minimal packet you want mldonkey to send when data is | |
| available on the connection *) | |
| minimal_packet_size = 600 | |
| (* Should a connection check if the peer we are connected to is still alive? | |
| This implies some bandwidth-cost (with 200 connections ~10-20%) *) | |
| socket_keepalive = false | |
| (************************************) | |
| (* SECTION : HTML mods FOR EXPERTS *) | |
| (* Options to configure HTML mode *) | |
| (************************************) | |
| (* Whether to use the modified WEB interface *) | |
| html_mods = true | |
| (* Which html_mods style to use (set with html_mods_style command) *) | |
| html_mods_style = 0 | |
| (* Whether to use human readable GMk number format *) | |
| html_mods_human_readable = true | |
| (* Whether to use relative availability in the WEB interface *) | |
| html_mods_use_relative_availability = true | |
| (* Whether to display the Net column in vd output *) | |
| html_mods_vd_network = true | |
| (* Whether to display the Comments column in vd output *) | |
| html_mods_vd_comments = true | |
| (* Whether to display the User column in vd output *) | |
| html_mods_vd_user = false | |
| (* Whether to display the Group column in vd output *) | |
| html_mods_vd_group = false | |
| (* Whether to display the Active Sources column in vd output *) | |
| html_mods_vd_active_sources = true | |
| (* Whether to display the Age column in vd output *) | |
| html_mods_vd_age = true | |
| (* Whether to display flags instead of country codes *) | |
| html_flags = true | |
| (* Show graph in vd output *) | |
| html_mods_vd_gfx = true | |
| (* Remove graph files on core shutdown *) | |
| html_mods_vd_gfx_remove = false | |
| (* Fill graph in vd output *) | |
| html_mods_vd_gfx_fill = true | |
| (* Split download and upload graph in vd output *) | |
| html_mods_vd_gfx_split = false | |
| (* Stacked download and upload graph *) | |
| html_mods_vd_gfx_stack = true | |
| (* Flip up/side graph position in vd output *) | |
| html_mods_vd_gfx_flip = true | |
| (* Show mean line on graph in vd output *) | |
| html_mods_vd_gfx_mean = true | |
| (* Show transparent graph in vd output (only for png) *) | |
| html_mods_vd_gfx_transparent = true | |
| (* Draw graph as png if true, else draw as jpg in vd output *) | |
| html_mods_vd_gfx_png = true | |
| (* Show hourly graph in vd output *) | |
| html_mods_vd_gfx_h = true | |
| (* Graph x size in vd output ( 365 < x < 3665 ) *) | |
| html_mods_vd_gfx_x_size = 795 | |
| (* Graph y size in vd output ( 200 < y < 1200 ) *) | |
| html_mods_vd_gfx_y_size = 200 | |
| (* compute values for hourly graph every 1,2,3,4,5,10,15,20,30,60 min | |
| Changes to this option require a core restart. *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| html_mods_vd_gfx_h_intervall = 60 | |
| (* Dynamic grid width, start with 1 h/grid, maximum html_mods_vd_gfx_h_grid_time h/grid *) | |
| html_mods_vd_gfx_h_dymamic = true | |
| (* Max hours on time scale per grid (0 = no limit) *) | |
| html_mods_vd_gfx_h_grid_time = 0 | |
| (* Number of shown subgrids on graph (0 = no subgrids) *) | |
| html_mods_vd_gfx_subgrid = 0 | |
| (* Draw tag graph *) | |
| html_mods_vd_gfx_tag = false | |
| (* Use tag source image *) | |
| html_mods_vd_gfx_tag_use_source = false | |
| (* Tag source image name *) | |
| html_mods_vd_gfx_tag_source = image | |
| (* Draw tag as png if true, else draw as jpg in vd output *) | |
| html_mods_vd_gfx_tag_png = true | |
| (* Enable tag graph title *) | |
| html_mods_vd_gfx_tag_enable_title = true | |
| (* Tag graph title *) | |
| html_mods_vd_gfx_tag_title = "MLNet traffic" | |
| (* Tag graph title x pos in vd output *) | |
| html_mods_vd_gfx_tag_title_x_pos = 4 | |
| (* Tag graph title y pos in vd output *) | |
| html_mods_vd_gfx_tag_title_y_pos = 1 | |
| (* Tag graph download x pos in vd output *) | |
| html_mods_vd_gfx_tag_dl_x_pos = 4 | |
| (* Tag graph download y pos in vd output *) | |
| html_mods_vd_gfx_tag_dl_y_pos = 17 | |
| (* Tag graph upload x pos in vd output *) | |
| html_mods_vd_gfx_tag_ul_x_pos = 4 | |
| (* Tag graph upload y pos in vd output *) | |
| html_mods_vd_gfx_tag_ul_y_pos = 33 | |
| (* Tag graph x size in vd output ( 130 < x < 3600 ) *) | |
| html_mods_vd_gfx_tag_x_size = 80 | |
| (* Tag graph y size in vd output ( 50 < x < 1200 ) *) | |
| html_mods_vd_gfx_tag_y_size = 50 | |
| (* Whether to display the Last column in vd output *) | |
| html_mods_vd_last = true | |
| (* Whether to display the Priority column in vd output *) | |
| html_mods_vd_prio = true | |
| (* Change height of download indicator bar in vd output *) | |
| html_vd_barheight = 2 | |
| (* Whether to display chunks list as graph or text in vd output *) | |
| html_vd_chunk_graph = true | |
| (* Change style of chunk graph *) | |
| html_vd_chunk_graph_style = 0 | |
| (* Change max width of chunk graph *) | |
| html_vd_chunk_graph_max_width = 200 | |
| (* Whether to display the pending slots in uploaders command *) | |
| html_mods_show_pending = true | |
| (* Whether to load the mldonkey_messages.ini file (false=use internal settings) *) | |
| html_mods_load_message_file = false | |
| (* Maximum chat messages to log in memory *) | |
| html_mods_max_messages = 50 | |
| (* Whether to use checkboxes in the WEB interface for download list *) | |
| html_checkbox_vd_file_list = true | |
| (* Whether to use checkboxes in the WEB interface for search result list *) | |
| html_checkbox_search_file_list = false | |
| (* Use gzip compression on web pages *) | |
| html_use_gzip = false | |
| (* Whether to use the fancy javascript tooltips or plain html-title *) | |
| html_mods_use_js_tooltips = true | |
| (* How long to wait before displaying the tooltips *) | |
| html_mods_js_tooltips_wait = 0 | |
| (* How long to display the tooltips *) | |
| html_mods_js_tooltips_timeout = 100000 | |
| (* Use javascript to display option help text as js popup (true=use js, false=use html tables) *) | |
| html_mods_use_js_helptext = true | |
| (************************************) | |
| (* SECTION : Debug FOR EXPERTS *) | |
| (* Debug options *) | |
| (************************************) | |
| (* If this option is set, IP addresses on the local network are allowed *) | |
| allow_local_network = false | |
| (* size of log in number of records *) | |
| log_size = 300 | |
| (* Maximum size of log_file in MB, this value is only checked on startup, | |
| log_file will be deleted if its bigger than log_file_size. *) | |
| log_file_size = 2 | |
| (* The file in which you want mldonkey to log its debug messages. If you | |
| set this option, mldonkey will log this info in the file until you use the | |
| 'close_log' command. The log file may become very large. You can | |
| also enable logging in a file after startup using the 'log_file' command. *) | |
| log_file = "mlnet.log" | |
| (* Post log messages to syslog. This setting is independent of log_file | |
| and its associated commands, therefore close_log does not stop log to syslog. | |
| Its therefore possible to log to syslog and log_file at the same time. *) | |
| log_to_syslog = false | |
| (* number of lines for GUI console messages *) | |
| gui_log_size = 30 | |
| (************************************) | |
| (* SECTION : Download FOR EXPERTS *) | |
| (* Download options *) | |
| (************************************) | |
| (* How many sources to use to download each chunk *) | |
| sources_per_chunk = 3 | |
| (************************************) | |
| (* SECTION : Startup FOR EXPERTS *) | |
| (* Startup options *) | |
| (************************************) | |
| (* How many megabytes should MLdonkey keep for saving configuration files. *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| config_files_security_space = 10 | |
| (************************************) | |
| (* SECTION : Paths FOR EXPERTS *) | |
| (* Paths options *) | |
| (************************************) | |
| (* Name of program used for preview (first arg is local filename, second arg | |
| is name of file as searched on eDonkey *) | |
| previewer = "/usr/bin/see" | |
| (* Directory where mldonkey binaries are installed *) | |
| mldonkey_bin = "." | |
| (* Name of GUI to start *) | |
| mldonkey_gui = "./mlgui" | |
| (************************************) | |
| (* SECTION : Other FOR EXPERTS *) | |
| (* Other options *) | |
| (************************************) | |
| (* Buffer writes and flush after buffer_writes_delay seconds (experimental) *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| buffer_writes_delay = 30. | |
| (* Flush buffers if buffers exceed buffer_writes_threshold kB (experimental) *) | |
| buffer_writes_threshold = 1024 | |
| (* The conversions to apply on Unicode characters *) | |
| utf8_filename_conversions = [] | |
| (* The size of the buffer between the client and its GUI. Can be useful | |
| to increase when the connection between them has a small bandwith *) | |
| interface_buffer = 1000000 | |
| (* The size long names will be shortened to in the interface *) | |
| max_name_len = 50 | |
| (* The size filenames will be shortened to in search results *) | |
| max_result_name_len = 50 | |
| (* The maximum number of different filenames used by MLDonkey *) | |
| max_filenames = 50 | |
| (* The size long client names will be shortened to in the interface *) | |
| max_client_name_len = 25 | |
| (* Is the default terminal an ANSI terminal (escape sequences can be used) *) | |
| term_ansi = true | |
| (* Delay between updates to the GUI *) | |
| update_gui_delay = 1. | |
| (* The realm shown when connecting with a WEB browser *) | |
| http_realm = MLdonkey | |
| (* This option controls whether the WEB interface should show frame borders or not *) | |
| html_frame_border = true | |
| (* The height of the command frame in pixel (depends on your screen and browser sizes) *) | |
| commands_frame_height = 46 | |
| (* Message printed at startup additional to welcome text *) | |
| motd_html = "" | |
| (* Force compaction every <n> hours (in [1..24]) *) | |
| compaction_delay = 2 | |
| (* The delay between reloads of the vd output in the WEB interface *) | |
| vd_reload_delay = 120 | |
| (* Should the MLSUBMIT.REG file be created *) | |
| create_mlsubmit = true | |
| (* Size of the minor heap in kB *) | |
| minor_heap_size = 32 | |
| (* The source queues to display in source lists (see 'sources' command) *) | |
| relevant_queues = [ | |
| 0; | |
| 1; | |
| 2; | |
| 3; | |
| 4; | |
| 5; | |
| 6; | |
| 8; | |
| 9; | |
| 10;] | |
| (* The minimal delay between two connections to the same client (in seconds) *) | |
| min_reask_delay = 600 | |
| (* Whether to display results already downloaded *) | |
| display_downloaded_results = true | |
| (* Minimal number of results for filter form to appear *) | |
| filter_table_threshold = 50 | |
| (* Maximal size in byte of the buffers of a client, minimum 50.000 byte. | |
| For high-volume links raise this value to 1.000.000 or higher. *) | |
| client_buffer_size = 500000 | |
| (* The delay between two saves of the 'downloads.ini' file (default is 15 minutes). | |
| Changes to this option require a core restart. *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| save_options_delay = 900. | |
| (* timeout when connecting to a server *) | |
| server_connection_timeout = 30. | |
| (* The delay between one glance at a file and another *) | |
| (* changing this option requires restart of MLDonkey core *) | |
| download_sample_rate = 1. | |
| (* How many samples go into an estimate of transfer rates *) | |
| download_sample_size = 100 | |
| (* This option defines a set of date at which some commands have to be executed. | |
| For each tuple, the first argument is a list of week days (from 0 to 6), | |
| the second is a list of hours (from 0 to 23) and the last one a command to | |
| execute. Can be used with 'pause all' and 'resume all' for example to | |
| resume and pause downloads automatically for the night. *) | |
| calendar = [] | |
| (* The percentage of free memory before a compaction is triggered *) | |
| compaction_overhead = 25 | |
| (* The major GC speed is computed from this parameter. This is the memory | |
| that will be "wasted" because the GC does not immediatly collect | |
| unreachable blocks. It is expressed as a percentage of the memory used | |
| for live data. The GC will work more (use more CPU time and collect | |
| blocks more eagerly) if space_overhead is smaller. *) | |
| space_overhead = 80 | |
| (* Maximal number of results displayed for a search *) | |
| max_displayed_results = 1000 | |
| (* (internal option) *) | |
| (* Do not change this option, internal use only! *) | |
| options_version = 22 | |
| (* Maximum number of comments per file *) | |
| max_comments_per_file = 100 | |
| (* Maximum length of file comments *) | |
| max_comment_length = 256 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment