gistfile1.txt

root@IPCam_HI35xx:/tmp# dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.4.35 (root@0923079cdeb5) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #4 Mon Oct 22 18:14:25 UTC 2018
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: hi3518ev200
[    0.000000] Ignoring unrecognised tag 0x54410010
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 9472
[    0.000000] free_area_init_node: node 0, pgdat c0d62784, node_mem_map c0da1000
[    0.000000]   Normal zone: 74 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 9398 pages, LIFO batch:1
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 9398
[    0.000000] Kernel command line: mem=37M console=ttyAMA0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 37MB = 37MB total
[    0.000000] Memory: 23516k/23516k available, 14372k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc2800000 - 0xff000000   ( 968 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc2500000   (  37 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0476000   (4536 kB)
[    0.000000]       .init : 0xc0476000 - 0xc0d3006c   (8937 kB)
[    0.000000]       .data : 0xc0d32000 - 0xc0d62ea0   ( 196 kB)
[    0.000000]        .bss : 0xc0d62ec4 - 0xc0da04b0   ( 246 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:104
[    0.000000] VIC @fe0d0000: id 0x00641190, vendor 0x41
[    0.000000] sched_clock: 32 bits at 49MHz, resolution 20ns, wraps every 86767ms
[    0.000000] Console: colour dummy device 80x30
[    0.000467] Calibrating delay loop... 269.10 BogoMIPS (lpj=1345536)
[    0.070055] pid_max: default: 32768 minimum: 301
[    0.070393] Mount-cache hash table entries: 512
[    0.071614] CPU: Testing write buffer coherency: ok
[    0.072192] Setting up static identity map for 0x803907b0 - 0x80390808
[    0.076307] dummy: 
[    0.077138] NET: Registered protocol family 16
[    0.088441] Serial: AMBA PL011 UART driver
[    0.088651] uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 5) is a PL011 rev2
[    0.301521] console [ttyAMA0] enabled
[    0.305931] uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 30) is a PL011 rev2
[    0.313492] uart:2: ttyAMA2 at MMIO 0x200a0000 (irq = 25) is a PL011 rev2
[    0.369217] bio: create slab <bio-0> at 0
[    0.375127] gpiochip_add: registered GPIOs 0 to 7 on device: dev:gpio0
[    0.382440] gpiochip_add: registered GPIOs 8 to 15 on device: dev:gpio1
[    0.389783] gpiochip_add: registered GPIOs 16 to 23 on device: dev:gpio2
[    0.397321] gpiochip_add: registered GPIOs 24 to 31 on device: dev:gpio3
[    0.404794] gpiochip_add: registered GPIOs 32 to 39 on device: dev:gpio4
[    0.412277] gpiochip_add: registered GPIOs 40 to 47 on device: dev:gpio5
[    0.419682] gpiochip_add: registered GPIOs 48 to 55 on device: dev:gpio6
[    0.427181] gpiochip_add: registered GPIOs 56 to 63 on device: dev:gpio7
[    0.434645] gpiochip_add: registered GPIOs 64 to 71 on device: dev:gpio8
[    0.444668] SCSI subsystem initialized
[    0.450228] hi-spi-master hi-spi-master.0: with 1 chip select slaves attached
[    0.458760] hi-spi-master hi-spi-master.1: with 2 chip select slaves attached
[    0.468439] usbcore: registered new interface driver usbfs
[    0.474984] usbcore: registered new interface driver hub
[    0.481025] usbcore: registered new device driver usb
[    0.490971] Switching to clocksource timer0
[    0.537011] NET: Registered protocol family 2
[    0.541885] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.549678] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.557053] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.563554] TCP: Hash tables configured (established 2048 bind 2048)
[    0.569914] TCP: reno registered
[    0.573180] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.579084] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.585936] NET: Registered protocol family 1
[    0.590873] RPC: Registered named UNIX socket transport module.
[    0.596817] RPC: Registered udp transport module.
[    0.601581] RPC: Registered tcp transport module.
[    0.606293] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.880724] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.888117] NFS: Registering the id_resolver key type
[    0.896388] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.904987] fuse init (API version 7.18)
[    0.912282] msgmni has been set to 45
[    0.917633] io scheduler noop registered
[    0.921653] io scheduler deadline registered (default)
[    0.926907] io scheduler cfq registered
[    0.957362] brd: module loaded
[    0.966861] Check Flash Memory Controller v100 ...  Found.
[    0.973372] SPI Nor(cs 0) ID: 0xc2 0x20 0x17
[    0.977693] Block:64KB Chip:8MB Name:"MX25L6436F"
[    0.982484] SPI Nor total size: 8MB
[    0.988042] SPI Nand ID Table Version 2.2
[    0.993154] Cannot found a valid SPI Nand Device
[    1.223397] himii: probed
[    1.340085] CONFIG_HIETH_PHYID_U 1
[    1.348903] CONFIG_HIETH_PHYID_U 1
[    1.352750] CONFIG_HIETH_PHYID_D 3
[    1.357719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.384934] hiusb-ehci hiusb-ehci.0: HIUSB EHCI
[    1.389541] hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
[    1.397405] hiusb-ehci hiusb-ehci.0: irq 15, io mem 0x100b0000
[    1.420091] hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
[    1.428075] hub 1-0:1.0: USB hub found
[    1.431947] hub 1-0:1.0: 1 port detected
[    1.437370] Initializing USB Mass Storage driver...
[    1.443047] usbcore: registered new interface driver usb-storage
[    1.449073] USB Mass Storage support registered.
[    1.454919] mousedev: PS/2 mouse device common for all mice
[    1.462518] i2c /dev entries driver
[    1.469422] hisi_i2c hisi_i2c.0: Hisilicon [i2c-0] probed!
[    1.476254] hisi_i2c hisi_i2c.1: Hisilicon [i2c-1] probed!
[    1.483108] hisi_i2c hisi_i2c.2: Hisilicon [i2c-2] probed!
[    1.669750] usbcore: registered new interface driver usbhid
[    1.675417] usbhid: USB HID core driver
[    1.685655] TCP: cubic registered
[    1.688991] Initializing XFRM netlink socket
[    1.693376] NET: Registered protocol family 17
[    1.697892] NET: Registered protocol family 15
[    1.702637] 8021q: 802.1Q VLAN Support v1.8
[    1.706896] lib80211: common routines for IEEE802.11 drivers
[    1.712614] lib80211_crypt: registered algorithm 'NULL'
[    1.712639] Registering the dns_resolver key type
[    1.866780] Freeing init memory: 8936K
[    1.913287] init: Console is alive
[    2.930602] init: - preinit -
[    6.231780] procd: - early -
[    7.305799] procd: - ubus -
[    8.325374] procd: - init -
[   10.281221] tun: Universal TUN/TAP device driver, 1.6
[   10.286301] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   10.297695] usbcore: registered new interface driver i2c-tiny-usb
[   10.309914] usbcore: registered new interface driver cdc_acm
[   10.315669] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   10.336658] usbcore: registered new interface driver usbserial
[   10.343606] usbcore: registered new interface driver usbserial_generic
[   10.351286] USB Serial support registered for generic
[   10.356387] usbserial: USB Serial Driver core
[   10.364422] usbcore: registered new interface driver cdc_ether
[   10.374139] usbcore: registered new interface driver ch341
[   10.380762] USB Serial support registered for ch341-uart
[   10.390579] usbcore: registered new interface driver cp210x
[   10.397221] USB Serial support registered for cp210x
[   10.406438] usbcore: registered new interface driver dm9601
[   10.422573] usbcore: registered new interface driver ftdi_sio
[   10.429400] USB Serial support registered for FTDI USB Serial Device
[   10.436032] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[   10.446437] usbcore: registered new interface driver pl2303
[   10.453153] USB Serial support registered for pl2303
[   10.462199] PPP generic driver version 2.4.2
[   14.434601] device eth0.490 entered promiscuous mode
[   14.439596] device eth0 entered promiscuous mode
[  101.351040] PHY: himii:01 - Link is Up - 10/Half
[  101.358308] br-vlan: port 1(eth0.490) entered forwarding state
[  101.364299] br-vlan: port 1(eth0.490) entered forwarding state
[  103.360297] br-vlan: port 1(eth0.490) entered forwarding state
[  141.225048] Hisilicon Media Memory Zone Manager
[  141.247582] Module himedia: init ok
[  141.265830] hi3518e_base: module license 'Proprietary' taints kernel.
[  141.272404] Disabling lock debugging due to kernel taint
[  141.313680] load sys.ko for Hi3518EV200...OK!
[  141.346707] load tde.ko ...OK!
[  141.373274] load region.ko ....OK!
[  141.408001] load vgs.ko for Hi3518EV200...OK!
[  141.437009] ISP Mod init!
[  141.480999] load viu.ko for Hi3518EV200...OK!
[  141.525094] load vpss.ko ....OK!
[  141.551737] load rc.ko for Hi3518EV200...OK!
[  141.588576] load venc.ko for Hi3518EV200...OK!
[  141.614031] load chnl.ko for Hi3518EV200...OK!
[  141.651305] load h264e.ko for Hi3518EV200...OK!
[  141.678759] load jpege.ko for Hi3518EV200...OK!
[  141.709624] load ive.ko for Hi3518EV200...OK!
[  141.883878] acodec inited!
[  142.010785] mipi_init
[  142.030521] init phy power successful!
[  142.034304] load hi_mipi driver successful!