Building a complete GNU toolchain, comprised of binutils + gcc + glibc

gnu-toolchain.md

Building a complete GNU toolchain

Things required:

• Linux headers: https://cdn.kernel.org/pub/linux/kernel/
• Binutils: https://www.gnu.org/software/binutils/
• GCC: https://www.gnu.org/software/gcc/
• glibc: https://www.gnu.org/software/libc/

Environment variables

These variables control the target architecture, and installation directory.

export TARGET=x86_64-pc-linux-gnu
export PREFIX=$HOME/gcc/x.x.x
export TARGET_PREFIX=$PREFIX/$TARGET
export PATH=$PREFIX/bin:$PATH

Linux headers

cd linux-x.x.x
make ARCH=$(echo $TARGET | cut -d '-' -f 1) INSTALL_HDR_PATH=$TARGET_PREFIX headers_install

Binutils

mkdir binutils-build
cd binutils-build
../binutils-x.x.x/configure --target=$TARGET --prefix=$PREFIX --disable-nls -v
make -j$(nproc) all install

GCC (first-stage)

May need the additional configure flag --disable-multilib if there are no 32-bit system libraries installed on the system. Note that --with-newlib does not refer to the newlib C library.

cd gcc-x.x.x
./contrib/download_prerequisites
cd ..
mkdir gcc-build
cd gcc-build
../gcc-x.x.x/configure --target=$TARGET --prefix=/tmp/gcc-first-stage --without-headers --with-newlib -v
make -j$(nproc) all-gcc all-target-libgcc install-gcc install-target-libgcc

glibc

cd glibc-x.x
CC=/tmp/gcc-first-stage/bin/gcc ../glibc-x.x/configure --target=$TARGET --prefix=$PREFIX --with-headers=${TARGET_PREFIX}/include --without-selinux
make -j$(nproc) all install

GCC (final)

May need again --disable-multilib.

cd gcc-build
rm -rf *
../gcc-x.x.x/configure --target=$TARGET --prefix=$PREFIX --enable-languages=c,c++
make -j$(nproc) all install

Using the new toolchain

In order to use the new compiler together with the new glibc, call gcc/g++ with the following linking flags:

-L$PREFIX/lib -L$PREFIX/lib64 -L$TARGET_PREFIX/lib -I$PREFIX/include -I$TARGET_PREFIX/include -Wl,--rpath=$PREFIX/lib -Wl,--rpath=$PREFIX/lib64 -Wl,--rpath=$TARGET_PREFIX/lib -Wl,--dynamic-linker=$PREFIX/lib/ld-linux-x86-64.so.2

References

1. https://www6.software.ibm.com/developerworks/education/l-cross/l-cross-ltr.pdf
2. https://stackoverflow.com/questions/62651270/glibc-configure-doesnt-recognize-linux-header-files
3. https://stackoverflow.com/questions/22707265/how-to-build-libgcc-of-gcc-compiler
4. https://gcc.gnu.org/install/configure.html

Hi! thanks for your guide.
I have a problem. I have a structure like this:
.
├── bin
├── build
│   ├── binutils-build
│   ├── gcc-build
│   ├── gdb-build
│   └── glibc-build
└── sources
├── binutils-2.30
├── gcc-8.5.0
└── glibc-2.2.4

From glibc-build i launch:
CC=/tmp/gcc-first-stage/bin/gcc ../../sources/glibc-2.2.4/configure --target=$TARGET --prefix=$PREFIX --with-headers=${TARGET_PREFIX}/include --without-selinux

So when i configure glibc i obtain this error:

checking sysdep dirs... configure: error: The x86_64 is not supported.

Hi! thanks for your guide. I have a problem. I have a structure like this: . ├── bin ├── build │ ├── binutils-build │ ├── gcc-build │ ├── gdb-build │ └── glibc-build └── sources ├── binutils-2.30 ├── gcc-8.5.0 └── glibc-2.2.4

From glibc-build i launch: CC=/tmp/gcc-first-stage/bin/gcc ../../sources/glibc-2.2.4/configure --target=$TARGET --prefix=$PREFIX --with-headers=${TARGET_PREFIX}/include --without-selinux

So when i configure glibc i obtain this error:

checking sysdep dirs... configure: error: The x86_64 is not supported.

Hi Stantonparish,

Unfortunately, building the gnu toolchain from scratch is complicated, and the procedure sometimes differs from version to version. Since I wrote this gist, I've given up on building it manually and I usually resort to crosstool-ng. Although it's intended for building a cross-compiling toolchain, you can also use it to build a toolchain for the host platform.

Best of luck with it!

Take a look at the Linux From Scratch project. They have a very good system for building a full toolchain from scratch.
https://www.linuxfromscratch.org/lfs/

Seems this one

make -j$(nproc) all-gcc all-target-libgcc install-gcc install-target-libgcc

needs to be split to 2 sequential makes for gcc and libgcc.
(Had an error with libgcc configure failing to use xgcc which isn't built yet).