chrisa · October 9, 2018 21:05
diff --git a/beebscsi-master-largeLUN.txt b/beebscsi-master-largeLUN.txt
 Oct 09 21:21:15.040100 SCSI State: Selected by host ID 1
 Oct 09 21:21:15.040352 SCSI State: Command phase
 Oct 09 21:21:15.073097 SCSI State: Information transfer phase: Command
 Oct 09 21:21:15.073337 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:15.093120 SCSI Commands: Received command operand bytes: 8 0 0 0 16 0
 Oct 09 21:21:15.093370 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:15.114095 SCSI Commands: Target LUN = 0, LBA = 0, Blocks = 16
 Oct 09 21:21:15.114335 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:15.114514 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:15.134095 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:15.134330 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:15.155115 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:15.155353 SCSI Commands: Read6 command successful
 Oct 09 21:21:15.155665 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:15.175092 SCSI State: Information transfer phase: Status
 Oct 09 21:21:15.175329 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:15.196094 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:15.196331 SCSI State: Bus Free
 Oct 09 21:21:15.196507 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:15.196664 SCSI State: Selected by host ID 1
 Oct 09 21:21:15.233094 SCSI State: Command phase
 Oct 09 21:21:15.233328 SCSI State: Information transfer phase: Command
 Oct 09 21:21:15.261080 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:15.261322 SCSI Commands: Received command operand bytes: 8 0 128 0 16 0
 Oct 09 21:21:15.282093 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:15.282330 SCSI Commands: Target LUN = 0, LBA = 32768, Blocks = 16
 Oct 09 21:21:15.302094 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:15.302331 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:15.323113 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:15.323345 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:15.323518 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:15.343087 SCSI Commands: Read6 command successful
 Oct 09 21:21:15.343317 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:15.343489 SCSI State: Information transfer phase: Status
 Oct 09 21:21:15.364099 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:15.364331 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:15.364508 SCSI State: Bus Free
 Oct 09 21:21:15.384118 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:15.384348 SCSI State: Selected by host ID 1
 Oct 09 21:21:15.384519 SCSI State: Command phase
 Oct 09 21:21:15.405092 SCSI State: Information transfer phase: Command
 Oct 09 21:21:15.405327 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:15.445098 SCSI Commands: Received command operand bytes: 8 1 0 0 16 0
 Oct 09 21:21:15.445334 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:15.470098 SCSI Commands: Target LUN = 0, LBA = 65536, Blocks = 16
 Oct 09 21:21:15.470334 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:15.491115 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:15.491349 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:15.511088 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:15.511324 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:15.511497 SCSI Commands: Read6 command successful
 Oct 09 21:21:15.532089 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:15.532318 SCSI State: Information transfer phase: Status
 Oct 09 21:21:15.532490 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:15.552114 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:15.552345 SCSI State: Bus Free
 Oct 09 21:21:15.552623 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:15.573091 SCSI State: Selected by host ID 1
 Oct 09 21:21:15.573326 SCSI State: Command phase
 Oct 09 21:21:15.573598 SCSI State: Information transfer phase: Command
 Oct 09 21:21:15.593093 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:15.593328 SCSI Commands: Received command operand bytes: 8 1 128 0 16 0
 Oct 09 21:21:15.614092 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:15.614326 SCSI Commands: Target LUN = 0, LBA = 98304, Blocks = 16
 Oct 09 21:21:15.658117 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:15.658350 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:15.679087 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:15.679320 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:15.700094 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:15.700329 SCSI Commands: Read6 command successful
 Oct 09 21:21:15.700603 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:15.720116 SCSI State: Information transfer phase: Status
 Oct 09 21:21:15.720350 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:15.740039 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:15.740211 SCSI State: Bus Free
 Oct 09 21:21:15.740336 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:15.740451 SCSI State: Selected by host ID 1
 Oct 09 21:21:15.761088 SCSI State: Command phase
 Oct 09 21:21:15.761320 SCSI State: Information transfer phase: Command
 Oct 09 21:21:15.781129 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:15.781363 SCSI Commands: Received command operand bytes: 8 2 0 0 16 0
 Oct 09 21:21:15.802099 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:15.802333 SCSI Commands: Target LUN = 0, LBA = 131072, Blocks = 16
 Oct 09 21:21:15.802511 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:15.863091 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:15.884101 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:15.884335 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:15.884503 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:15.904097 SCSI Commands: Read6 command successful
 Oct 09 21:21:15.904335 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:15.904510 SCSI State: Information transfer phase: Status
 Oct 09 21:21:15.925124 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:15.925357 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:15.925531 SCSI State: Bus Free
 Oct 09 21:21:15.945095 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:15.945324 SCSI State: Selected by host ID 1
 Oct 09 21:21:15.945501 SCSI State: Command phase
 Oct 09 21:21:15.966089 SCSI State: Information transfer phase: Command
 Oct 09 21:21:15.966319 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:15.986121 SCSI Commands: Received command operand bytes: 8 2 128 0 16 0
 Oct 09 21:21:15.986354 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:16.052092 SCSI Commands: Target LUN = 0, LBA = 163840, Blocks = 16
 Oct 09 21:21:16.052324 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:16.093099 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:16.093336 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:16.113118 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:16.113353 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:16.134094 SCSI Commands: Read6 command successful
 Oct 09 21:21:16.134330 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:16.134606 SCSI State: Information transfer phase: Status
 Oct 09 21:21:16.154093 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:16.154324 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:16.154597 SCSI State: Bus Free
 Oct 09 21:21:16.175090 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:16.175324 SCSI State: Selected by host ID 1
 Oct 09 21:21:16.175636 SCSI State: Command phase
 Oct 09 21:21:16.195116 SCSI State: Information transfer phase: Command
 Oct 09 21:21:16.195350 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:16.216097 SCSI Commands: Received command operand bytes: 8 3 0 0 16 0
 Oct 09 21:21:16.216328 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:16.216503 SCSI Commands: Target LUN = 0, LBA = 196608, Blocks = 16
 Oct 09 21:21:16.314097 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:16.314338 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:16.347114 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:16.347353 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:16.367092 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:16.367328 SCSI Commands: Read6 command successful
 Oct 09 21:21:16.388098 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:16.388334 SCSI State: Information transfer phase: Status
 Oct 09 21:21:16.388615 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:16.408121 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:16.408355 SCSI State: Bus Free
 Oct 09 21:21:16.408631 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:16.429097 SCSI State: Selected by host ID 1
 Oct 09 21:21:16.429329 SCSI State: Command phase
 Oct 09 21:21:16.429606 SCSI State: Information transfer phase: Command
 Oct 09 21:21:16.449095 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:16.449327 SCSI Commands: Received command operand bytes: 8 3 128 0 16 0
 Oct 09 21:21:16.470096 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:16.470335 SCSI Commands: Target LUN = 0, LBA = 229376, Blocks = 16
 Oct 09 21:21:16.600116 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:16.600346 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:16.625115 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:16.625349 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:16.646092 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:16.646329 SCSI Commands: Read6 command successful
 Oct 09 21:21:16.646604 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:16.666091 SCSI State: Information transfer phase: Status
 Oct 09 21:21:16.666324 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:16.666595 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:16.687091 SCSI State: Bus Free
 Oct 09 21:21:16.687325 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:16.687637 SCSI State: Selected by host ID 1
 Oct 09 21:21:16.707113 SCSI State: Command phase
 Oct 09 21:21:16.707346 SCSI State: Information transfer phase: Command
 Oct 09 21:21:16.728103 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:16.728343 SCSI Commands: Received command operand bytes: 8 4 0 0 16 0
 Oct 09 21:21:16.728520 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:16.863090 SCSI Commands: Target LUN = 0, LBA = 262144, Blocks = 16
 Oct 09 21:21:16.863325 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:16.908120 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:16.908358 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:16.928096 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:16.928332 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:16.949094 SCSI Commands: Read6 command successful
 Oct 09 21:21:16.949329 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:16.949605 SCSI State: Information transfer phase: Status
 Oct 09 21:21:16.969119 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:16.969352 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:16.969628 SCSI State: Bus Free
 Oct 09 21:21:16.990117 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:16.990351 SCSI State: Selected by host ID 1
 Oct 09 21:21:16.990626 SCSI State: Command phase
 Oct 09 21:21:17.010099 SCSI State: Information transfer phase: Command
 Oct 09 21:21:17.010330 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:17.031095 SCSI Commands: Received command operand bytes: 8 4 128 0 16 0
 Oct 09 21:21:17.031332 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:17.203125 SCSI Commands: Target LUN = 0, LBA = 294912, Blocks = 16
 Oct 09 21:21:17.203363 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:17.203537 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:17.235091 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:17.235335 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:17.256100 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:17.256336 SCSI Commands: Read6 command successful
 Oct 09 21:21:17.256488 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:17.276016 SCSI State: Information transfer phase: Status
 Oct 09 21:21:17.276250 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:17.297103 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:17.297336 SCSI State: Bus Free
 Oct 09 21:21:17.297481 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:17.317096 SCSI State: Selected by host ID 1
 Oct 09 21:21:17.317345 SCSI State: Command phase
 Oct 09 21:21:17.317505 SCSI State: Information transfer phase: Command
 Oct 09 21:21:17.338096 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:17.338327 SCSI Commands: Received command operand bytes: 8 5 0 0 16 0
 Oct 09 21:21:17.358134 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:17.358374 SCSI Commands: Target LUN = 0, LBA = 327680, Blocks = 16
 Oct 09 21:21:17.563090 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:17.563327 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:17.588092 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:17.588326 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:17.588485 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:17.608131 SCSI Commands: Read6 command successful
 Oct 09 21:21:17.608360 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:17.608515 SCSI State: Information transfer phase: Status
 Oct 09 21:21:17.629095 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:17.629324 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:17.629484 SCSI State: Bus Free
 Oct 09 21:21:17.648935 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:17.649114 SCSI State: Selected by host ID 1
 Oct 09 21:21:17.649202 SCSI State: Command phase
 Oct 09 21:21:17.670090 SCSI State: Information transfer phase: Command
 Oct 09 21:21:17.670322 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:17.690127 SCSI Commands: Received command operand bytes: 8 5 128 0 16 0
 Oct 09 21:21:17.690372 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:17.903112 SCSI Commands: Target LUN = 0, LBA = 360448, Blocks = 16
 Oct 09 21:21:17.903350 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:17.944100 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:17.944336 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:17.964123 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:17.964353 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:17.964508 SCSI Commands: Read6 command successful
 Oct 09 21:21:17.985091 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:17.985321 SCSI State: Information transfer phase: Status
 Oct 09 21:21:17.985478 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:18.005109 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:18.005340 SCSI State: Bus Free
 Oct 09 21:21:18.005493 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:18.026124 SCSI State: Selected by host ID 1
 Oct 09 21:21:18.026357 SCSI State: Command phase
 Oct 09 21:21:18.026514 SCSI State: Information transfer phase: Command
 Oct 09 21:21:18.046093 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:18.046326 SCSI Commands: Received command operand bytes: 8 6 0 0 16 0
 Oct 09 21:21:18.066935 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:18.067103 SCSI Commands: Target LUN = 0, LBA = 393216, Blocks = 16
 Oct 09 21:21:18.275698 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:18.325122 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:18.345100 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:18.345337 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:18.366093 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:18.366329 SCSI Commands: Read6 command successful
 Oct 09 21:21:18.366489 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:18.386095 SCSI State: Information transfer phase: Status
 Oct 09 21:21:18.386329 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:18.386487 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:18.407115 SCSI State: Bus Free
 Oct 09 21:21:18.407344 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:18.407500 SCSI State: Selected by host ID 1
 Oct 09 21:21:18.407702 SCSI State: Command phase
 Oct 09 21:21:18.427101 SCSI State: Information transfer phase: Command
 Oct 09 21:21:18.427328 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:18.448096 SCSI Commands: Received command operand bytes: 8 6 128 0 16 0
 Oct 09 21:21:18.448328 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:18.667869 SCSI Commands: Target LUN = 0, LBA = 425984, Blocks = 16
 Oct 09 21:21:18.668101 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:18.739093 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:18.763117 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:18.763351 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:18.763507 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:18.784095 SCSI Commands: Read6 command successful
 Oct 09 21:21:18.784328 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:18.784485 SCSI State: Information transfer phase: Status
 Oct 09 21:21:18.804094 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:18.804324 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:18.804477 SCSI State: Bus Free
 Oct 09 21:21:18.825097 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:18.825332 SCSI State: Selected by host ID 1
 Oct 09 21:21:18.825488 SCSI State: Command phase
 Oct 09 21:21:18.845132 SCSI State: Information transfer phase: Command
 Oct 09 21:21:18.845363 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:18.866096 SCSI Commands: Received command operand bytes: 8 7 0 0 16 0
 Oct 09 21:21:18.866327 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:19.083832 SCSI Commands: Target LUN = 0, LBA = 458752, Blocks = 16
 Oct 09 21:21:19.084071 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:19.181097 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:19.201121 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:19.201350 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:19.201504 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:19.222096 SCSI Commands: Read6 command successful
 Oct 09 21:21:19.222328 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:19.242101 SCSI State: Information transfer phase: Status
 Oct 09 21:21:19.242346 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:19.242503 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:19.263092 SCSI State: Bus Free
 Oct 09 21:21:19.263326 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:19.263482 SCSI State: Selected by host ID 1
 Oct 09 21:21:19.263934 SCSI State: Command phase
 Oct 09 21:21:19.283113 SCSI State: Information transfer phase: Command
 Oct 09 21:21:19.283352 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:19.304097 SCSI Commands: Received command operand bytes: 8 7 128 0 16 0
 Oct 09 21:21:19.304332 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:19.523831 SCSI Commands: Target LUN = 0, LBA = 491520, Blocks = 16
 Oct 09 21:21:19.524065 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:19.644107 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:19.664100 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:19.664334 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:19.685114 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:19.685344 SCSI Commands: Read6 command successful
 Oct 09 21:21:19.685499 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:19.705101 SCSI State: Information transfer phase: Status
 Oct 09 21:21:19.705333 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:19.705487 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:19.726088 SCSI State: Bus Free
 Oct 09 21:21:19.726319 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:19.726476 SCSI State: Selected by host ID 1
 Oct 09 21:21:19.726634 SCSI State: Command phase
 Oct 09 21:21:19.746093 SCSI State: Information transfer phase: Command
 Oct 09 21:21:19.746334 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:19.767114 SCSI Commands: Received command operand bytes: 8 8 0 0 16 0
 Oct 09 21:21:19.767349 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:19.983871 SCSI Commands: Target LUN = 0, LBA = 524288, Blocks = 16
 Oct 09 21:21:19.984106 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:20.131087 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:20.151931 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:20.152084 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:20.152145 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:20.172123 SCSI Commands: Read6 command successful
 Oct 09 21:21:20.172354 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:20.193097 SCSI State: Information transfer phase: Status
 Oct 09 21:21:20.193330 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:20.193500 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:20.213091 SCSI State: Bus Free
 Oct 09 21:21:20.213326 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:20.213504 SCSI State: Selected by host ID 1
 Oct 09 21:21:20.213664 SCSI State: Command phase
 Oct 09 21:21:20.234121 SCSI State: Information transfer phase: Command
 Oct 09 21:21:20.234356 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:20.254096 SCSI Commands: Received command operand bytes: 8 8 128 0 16 0
 Oct 09 21:21:20.254331 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:20.471871 SCSI Commands: Target LUN = 0, LBA = 557056, Blocks = 16
 Oct 09 21:21:20.472116 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:20.643111 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:20.664093 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:20.664324 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:20.664592 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:20.684098 SCSI Commands: Read6 command successful
 Oct 09 21:21:20.684331 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:20.705115 SCSI State: Information transfer phase: Status
 Oct 09 21:21:20.705348 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:20.705616 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:20.705735 SCSI State: Bus Free
 Oct 09 21:21:20.725097 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:20.725332 SCSI State: Selected by host ID 1
 Oct 09 21:21:20.725616 SCSI State: Command phase
 Oct 09 21:21:20.746042 SCSI State: Information transfer phase: Command
 Oct 09 21:21:20.746215 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:20.766085 SCSI Commands: Received command operand bytes: 8 9 0 0 16 0
 Oct 09 21:21:20.766325 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:20.983852 SCSI Commands: Target LUN = 0, LBA = 589824, Blocks = 16
 Oct 09 21:21:20.984089 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:21.180094 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:21.200096 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:21.200329 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:21.200484 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:21.221117 SCSI Commands: Read6 command successful
 Oct 09 21:21:21.221349 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:21.221503 SCSI State: Information transfer phase: Status
 Oct 09 21:21:21.241102 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:21.241333 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:21.241488 SCSI State: Bus Free
 Oct 09 21:21:21.262093 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:21.262326 SCSI State: Selected by host ID 1
 Oct 09 21:21:21.262482 SCSI State: Command phase
 Oct 09 21:21:21.282133 SCSI State: Information transfer phase: Command
 Oct 09 21:21:21.282368 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:21.303096 SCSI Commands: Received command operand bytes: 8 9 128 0 16 0
 Oct 09 21:21:21.303326 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:21.519831 SCSI Commands: Target LUN = 0, LBA = 622592, Blocks = 16
 Oct 09 21:21:21.520084 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:21.737087 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:21.757105 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:21.757340 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:21.778119 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:21.778353 SCSI Commands: Read6 command successful
 Oct 09 21:21:21.778508 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:21.798093 SCSI State: Information transfer phase: Status
 Oct 09 21:21:21.798329 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:21.798489 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:21.819101 SCSI State: Bus Free
 Oct 09 21:21:21.819331 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:21.819489 SCSI State: Selected by host ID 1
 Oct 09 21:21:21.820073 SCSI State: Command phase
 Oct 09 21:21:21.839091 SCSI State: Information transfer phase: Command
 Oct 09 21:21:21.839321 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:21.860101 SCSI Commands: Received command operand bytes: 8 10 0 0 16 0
 Oct 09 21:21:21.860335 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:22.079835 SCSI Commands: Target LUN = 0, LBA = 655360, Blocks = 16
 Oct 09 21:21:22.080072 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:22.322093 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:22.343093 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:22.343325 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:22.343485 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:22.363113 SCSI Commands: Read6 command successful
 Oct 09 21:21:22.363345 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:22.363502 SCSI State: Information transfer phase: Status
 Oct 09 21:21:22.384102 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:22.384348 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:22.384509 SCSI State: Bus Free
 Oct 09 21:21:22.404102 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:22.404335 SCSI State: Selected by host ID 1
 Oct 09 21:21:22.404494 SCSI State: Command phase
 Oct 09 21:21:22.425102 SCSI State: Information transfer phase: Command
 Oct 09 21:21:22.425338 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:22.445122 SCSI Commands: Received command operand bytes: 8 10 128 0 16 0
 Oct 09 21:21:22.445373 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:22.663866 SCSI Commands: Target LUN = 0, LBA = 688128, Blocks = 16
 Oct 09 21:21:22.664105 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:22.928098 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:22.949116 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:22.949351 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:22.949511 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:22.970095 SCSI Commands: Read6 command successful
 Oct 09 21:21:22.970330 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:22.990127 SCSI State: Information transfer phase: Status
 Oct 09 21:21:22.990355 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:22.990509 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:22.990661 SCSI State: Bus Free
 Oct 09 21:21:23.010098 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:23.010330 SCSI State: Selected by host ID 1
 Oct 09 21:21:23.010488 SCSI State: Command phase
 Oct 09 21:21:23.031092 SCSI State: Information transfer phase: Command
 Oct 09 21:21:23.031328 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:23.051127 SCSI Commands: Received command operand bytes: 8 11 0 0 16 0
 Oct 09 21:21:23.051374 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:23.271836 SCSI Commands: Target LUN = 0, LBA = 720896, Blocks = 16
 Oct 09 21:21:23.272068 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:23.559092 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:23.580102 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:23.580353 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:23.580513 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:23.600104 SCSI Commands: Read6 command successful
 Oct 09 21:21:23.600337 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:23.621097 SCSI State: Information transfer phase: Status
 Oct 09 21:21:23.621332 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:23.621487 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:23.641100 SCSI State: Bus Free
 Oct 09 21:21:23.641332 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:23.641485 SCSI State: Selected by host ID 1
 Oct 09 21:21:23.641641 SCSI State: Command phase
 Oct 09 21:21:23.662098 SCSI State: Information transfer phase: Command
 Oct 09 21:21:23.662341 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:23.682099 SCSI Commands: Received command operand bytes: 8 11 128 0 16 0
 Oct 09 21:21:23.682335 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:23.899888 SCSI Commands: Target LUN = 0, LBA = 753664, Blocks = 16
 Oct 09 21:21:23.900129 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:24.215092 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:24.235089 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:24.235323 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:24.256092 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:24.256325 SCSI Commands: Read6 command successful
 Oct 09 21:21:24.256484 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:24.276128 SCSI State: Information transfer phase: Status
 Oct 09 21:21:24.276354 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:24.276505 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:24.297037 SCSI State: Bus Free
 Oct 09 21:21:24.297205 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:24.297313 SCSI State: Selected by host ID 1
 Oct 09 21:21:24.297421 SCSI State: Command phase
 Oct 09 21:21:24.317096 SCSI State: Information transfer phase: Command
 Oct 09 21:21:24.317329 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:24.338118 SCSI Commands: Received command operand bytes: 8 12 0 0 16 0
 Oct 09 21:21:24.338352 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:24.555885 SCSI Commands: Target LUN = 0, LBA = 786432, Blocks = 16
 Oct 09 21:21:24.556117 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:24.894100 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:24.915096 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:24.915332 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:24.915488 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:24.935118 SCSI Commands: Read6 command successful
 Oct 09 21:21:24.935348 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:24.956092 SCSI State: Information transfer phase: Status
 Oct 09 21:21:24.956325 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:24.956482 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:24.956638 SCSI State: Bus Free
 Oct 09 21:21:24.976117 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:24.976371 SCSI State: Selected by host ID 1
 Oct 09 21:21:24.976536 SCSI State: Command phase
 Oct 09 21:21:24.997120 SCSI State: Information transfer phase: Command
 Oct 09 21:21:24.997368 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:25.017098 SCSI Commands: Received command operand bytes: 8 12 128 0 16 0
 Oct 09 21:21:25.017330 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:25.235884 SCSI Commands: Target LUN = 0, LBA = 819200, Blocks = 16
 Oct 09 21:21:25.236118 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:25.599088 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:25.619091 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:25.619324 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:25.619480 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:25.640124 SCSI Commands: Read6 command successful
 Oct 09 21:21:25.640353 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:25.640510 SCSI State: Information transfer phase: Status
 Oct 09 21:21:25.659895 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:25.660125 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:25.660282 SCSI State: Bus Free
 Oct 09 21:21:25.681096 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:25.681328 SCSI State: Selected by host ID 1
 Oct 09 21:21:25.681484 SCSI State: Command phase
 Oct 09 21:21:25.701120 SCSI State: Information transfer phase: Command
 Oct 09 21:21:25.701350 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:25.722103 SCSI Commands: Received command operand bytes: 8 13 0 0 16 0
 Oct 09 21:21:25.722335 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:25.939830 SCSI Commands: Target LUN = 0, LBA = 851968, Blocks = 16
 Oct 09 21:21:25.940073 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:26.324094 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:26.344121 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:26.344354 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:26.344510 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:26.365098 SCSI Commands: Read6 command successful
 Oct 09 21:21:26.365334 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:26.385103 SCSI State: Information transfer phase: Status
 Oct 09 21:21:26.385333 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:26.385490 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:26.385648 SCSI State: Bus Free
 Oct 09 21:21:26.406120 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:26.406290 SCSI State: Selected by host ID 1
 Oct 09 21:21:26.406401 SCSI State: Command phase
 Oct 09 21:21:26.426098 SCSI State: Information transfer phase: Command
 Oct 09 21:21:26.426336 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:26.447092 SCSI Commands: Received command operand bytes: 8 13 128 0 16 0
 Oct 09 21:21:26.447325 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:26.663881 SCSI Commands: Target LUN = 0, LBA = 884736, Blocks = 16
 Oct 09 21:21:26.664116 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:27.073094 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:27.098093 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:27.098327 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:27.098486 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:27.119118 SCSI Commands: Read6 command successful
 Oct 09 21:21:27.119351 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:27.119508 SCSI State: Information transfer phase: Status
 Oct 09 21:21:27.139103 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:27.139334 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:27.139491 SCSI State: Bus Free
 Oct 09 21:21:27.159089 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:27.159323 SCSI State: Selected by host ID 1
 Oct 09 21:21:27.159482 SCSI State: Command phase
 Oct 09 21:21:27.180118 SCSI State: Information transfer phase: Command
 Oct 09 21:21:27.180349 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:27.200110 SCSI Commands: Received command operand bytes: 8 14 0 0 16 0
 Oct 09 21:21:27.200357 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:27.415871 SCSI Commands: Target LUN = 0, LBA = 917504, Blocks = 16
 Oct 09 21:21:27.416111 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:27.848102 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:27.871992 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:27.872222 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:27.872330 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:27.893094 SCSI Commands: Read6 command successful
 Oct 09 21:21:27.893328 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:27.893483 SCSI State: Information transfer phase: Status
 Oct 09 21:21:27.913102 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:27.913333 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:27.913490 SCSI State: Bus Free
 Oct 09 21:21:27.934095 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:27.934326 SCSI State: Selected by host ID 1
 Oct 09 21:21:27.934484 SCSI State: Command phase
 Oct 09 21:21:27.954121 SCSI State: Information transfer phase: Command
 Oct 09 21:21:27.954353 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:27.975096 SCSI Commands: Received command operand bytes: 8 14 128 0 16 0
 Oct 09 21:21:27.975331 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:28.187867 SCSI Commands: Target LUN = 0, LBA = 950272, Blocks = 16
 Oct 09 21:21:28.188100 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:28.646101 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:28.671096 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:28.671332 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:28.671487 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:28.691113 SCSI Commands: Read6 command successful
 Oct 09 21:21:28.691349 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:28.692070 SCSI State: Information transfer phase: Status
 Oct 09 21:21:28.712104 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:28.712341 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:28.713344 SCSI State: Bus Free
 Oct 09 21:21:28.732125 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:28.732355 SCSI State: Selected by host ID 1
 Oct 09 21:21:28.733037 SCSI State: Command phase
 Oct 09 21:21:28.753120 SCSI State: Information transfer phase: Command
 Oct 09 21:21:28.753354 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:28.773097 SCSI Commands: Received command operand bytes: 8 15 0 0 16 0
 Oct 09 21:21:28.773340 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:28.987848 SCSI Commands: Target LUN = 0, LBA = 983040, Blocks = 16
 Oct 09 21:21:28.988087 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:29.469102 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:29.490119 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:29.490351 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:29.510097 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:29.510329 SCSI Commands: Read6 command successful
 Oct 09 21:21:29.510482 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:29.531091 SCSI State: Information transfer phase: Status
 Oct 09 21:21:29.531322 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:29.531477 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:29.551123 SCSI State: Bus Free
 Oct 09 21:21:29.551354 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:29.551505 SCSI State: Selected by host ID 1
 Oct 09 21:21:29.551710 SCSI State: Command phase
 Oct 09 21:21:29.572098 SCSI State: Information transfer phase: Command
 Oct 09 21:21:29.572327 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:29.592099 SCSI Commands: Received command operand bytes: 8 15 128 0 16 0
 Oct 09 21:21:29.592330 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:29.811873 SCSI Commands: Target LUN = 0, LBA = 1015808, Blocks = 16
 Oct 09 21:21:29.812114 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:30.316972 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:30.337898 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:30.338017 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:30.357917 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:30.358011 SCSI Commands: Read6 command successful
 Oct 09 21:21:30.358069 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:30.379006 SCSI State: Information transfer phase: Status
 Oct 09 21:21:30.379184 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:30.379666 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:30.399046 SCSI State: Bus Free
 Oct 09 21:21:30.399210 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:30.399316 SCSI State: Selected by host ID 1
 Oct 09 21:21:30.399423 SCSI State: Command phase
 Oct 09 21:21:30.420109 SCSI State: Information transfer phase: Command
 Oct 09 21:21:30.420346 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:30.440106 SCSI Commands: Received command operand bytes: 8 16 0 0 16 0
 Oct 09 21:21:30.440340 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:30.659838 SCSI Commands: Target LUN = 0, LBA = 1048576, Blocks = 16
 Oct 09 21:21:30.660079 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:31.190100 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:31.210097 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:31.210342 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:31.210500 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:31.231099 SCSI Commands: Read6 command successful
 Oct 09 21:21:31.231342 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:31.231503 SCSI State: Information transfer phase: Status
 Oct 09 21:21:31.251093 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:31.251337 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:31.251496 SCSI State: Bus Free
 Oct 09 21:21:31.272122 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:31.272352 SCSI State: Selected by host ID 1
 Oct 09 21:21:31.272506 SCSI State: Command phase
 Oct 09 21:21:31.292101 SCSI State: Information transfer phase: Command
 Oct 09 21:21:31.292329 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:31.313097 SCSI Commands: Received command operand bytes: 8 16 128 0 16 0
 Oct 09 21:21:31.313333 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:31.531876 SCSI Commands: Target LUN = 0, LBA = 1081344, Blocks = 16
 Oct 09 21:21:31.532120 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:32.082096 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:32.103117 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:32.103352 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:32.103509 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:32.124097 SCSI Commands: Read6 command successful
 Oct 09 21:21:32.124330 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:32.144098 SCSI State: Information transfer phase: Status
 Oct 09 21:21:32.144332 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:32.144486 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:32.144638 SCSI State: Bus Free
 Oct 09 21:21:32.165095 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:32.165326 SCSI State: Selected by host ID 1
 Oct 09 21:21:32.165480 SCSI State: Command phase
 Oct 09 21:21:32.185132 SCSI State: Information transfer phase: Command
 Oct 09 21:21:32.185361 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:32.205094 SCSI Commands: Received command operand bytes: 8 17 0 0 16 0
 Oct 09 21:21:32.205329 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:32.423870 SCSI Commands: Target LUN = 0, LBA = 1114112, Blocks = 16
 Oct 09 21:21:32.424111 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:33.000101 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:33.021123 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:33.021355 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:33.041096 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:33.041333 SCSI Commands: Read6 command successful
 Oct 09 21:21:33.041488 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:33.061110 SCSI State: Information transfer phase: Status
 Oct 09 21:21:33.061341 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:33.061503 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:33.082124 SCSI State: Bus Free
 Oct 09 21:21:33.082357 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:33.082514 SCSI State: Selected by host ID 1
 Oct 09 21:21:33.082670 SCSI State: Command phase
 Oct 09 21:21:33.102096 SCSI State: Information transfer phase: Command
 Oct 09 21:21:33.102329 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:33.123091 SCSI Commands: Received command operand bytes: 8 17 128 0 16 0
 Oct 09 21:21:33.123328 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:33.339861 SCSI Commands: Target LUN = 0, LBA = 1146880, Blocks = 16
 Oct 09 21:21:33.340097 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:33.942100 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:33.963123 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:33.963356 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:33.983098 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:33.983336 SCSI Commands: Read6 command successful
 Oct 09 21:21:33.983492 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:34.004102 SCSI State: Information transfer phase: Status
 Oct 09 21:21:34.004335 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:34.004494 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:34.024126 SCSI State: Bus Free
 Oct 09 21:21:34.024356 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:34.024516 SCSI State: Selected by host ID 1
 Oct 09 21:21:34.044095 SCSI State: Command phase
 Oct 09 21:21:34.044328 SCSI State: Information transfer phase: Command
 Oct 09 21:21:34.044485 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:34.065099 SCSI Commands: Received command operand bytes: 8 18 0 0 16 0
 Oct 09 21:21:34.065328 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:34.283833 SCSI Commands: Target LUN = 0, LBA = 1179648, Blocks = 16
 Oct 09 21:21:34.284067 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:34.913096 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:34.933100 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:34.933333 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:34.933492 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:34.954127 SCSI Commands: Read6 command successful
 Oct 09 21:21:34.954366 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:34.954525 SCSI State: Information transfer phase: Status
 Oct 09 21:21:34.974097 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:34.974329 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:34.974484 SCSI State: Bus Free
 Oct 09 21:21:34.995093 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:34.995324 SCSI State: Selected by host ID 1
 Oct 09 21:21:34.995479 SCSI State: Command phase
 Oct 09 21:21:35.015128 SCSI State: Information transfer phase: Command
 Oct 09 21:21:35.015358 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:35.036096 SCSI Commands: Received command operand bytes: 8 18 128 0 16 0
 Oct 09 21:21:35.036327 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:35.255831 SCSI Commands: Target LUN = 0, LBA = 1212416, Blocks = 16
 Oct 09 21:21:35.256068 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:35.904095 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:35.923911 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:35.924040 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:35.924085 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:35.945123 SCSI Commands: Read6 command successful
 Oct 09 21:21:35.945359 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:35.945517 SCSI State: Information transfer phase: Status
 Oct 09 21:21:35.965100 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:35.965329 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:35.965485 SCSI State: Bus Free
 Oct 09 21:21:35.985935 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:35.986097 SCSI State: Selected by host ID 1
 Oct 09 21:21:35.986185 SCSI State: Command phase
 Oct 09 21:21:36.006139 SCSI State: Information transfer phase: Command
 Oct 09 21:21:36.006371 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:36.027098 SCSI Commands: Received command operand bytes: 8 19 0 0 16 0
 Oct 09 21:21:36.027329 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:36.239869 SCSI Commands: Target LUN = 0, LBA = 1245184, Blocks = 16
 Oct 09 21:21:36.240101 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:36.916101 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:36.936129 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:36.936359 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:36.957098 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:36.957335 SCSI Commands: Read6 command successful
 Oct 09 21:21:36.957495 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:36.977106 SCSI State: Information transfer phase: Status
 Oct 09 21:21:36.977341 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:36.977497 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:36.998099 SCSI State: Bus Free
 Oct 09 21:21:36.998334 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:36.998489 SCSI State: Selected by host ID 1
 Oct 09 21:21:36.998643 SCSI State: Command phase
 Oct 09 21:21:37.018119 SCSI State: Information transfer phase: Command
 Oct 09 21:21:37.018352 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:37.038111 SCSI Commands: Received command operand bytes: 8 19 128 0 16 0
 Oct 09 21:21:37.038350 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:37.255834 SCSI Commands: Target LUN = 0, LBA = 1277952, Blocks = 16
 Oct 09 21:21:37.256067 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:37.956100 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:37.976123 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:37.976356 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:37.976513 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:37.997098 SCSI Commands: Read6 command successful
 Oct 09 21:21:37.997334 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:38.017116 SCSI State: Information transfer phase: Status
 Oct 09 21:21:38.017352 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:38.017508 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:38.038123 SCSI State: Bus Free
 Oct 09 21:21:38.038353 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:38.038508 SCSI State: Selected by host ID 1
 Oct 09 21:21:38.038666 SCSI State: Command phase
 Oct 09 21:21:38.058103 SCSI State: Information transfer phase: Command
 Oct 09 21:21:38.058333 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:38.079126 SCSI Commands: Received command operand bytes: 8 20 0 0 16 0
 Oct 09 21:21:38.079357 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:38.295836 SCSI Commands: Target LUN = 0, LBA = 1310720, Blocks = 16
 Oct 09 21:21:38.296069 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:39.021099 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:39.041099 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:39.041329 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:39.041488 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:39.062097 SCSI Commands: Read6 command successful
 Oct 09 21:21:39.062334 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:39.062492 SCSI State: Information transfer phase: Status
 Oct 09 21:21:39.082118 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:39.082364 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:39.082524 SCSI State: Bus Free
 Oct 09 21:21:39.103096 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:39.103328 SCSI State: Selected by host ID 1
 Oct 09 21:21:39.103482 SCSI State: Command phase
 Oct 09 21:21:39.123095 SCSI State: Information transfer phase: Command
 Oct 09 21:21:39.123330 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:39.144129 SCSI Commands: Received command operand bytes: 8 20 128 0 16 0
 Oct 09 21:21:39.144364 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:39.363857 SCSI Commands: Target LUN = 0, LBA = 1343488, Blocks = 16
 Oct 09 21:21:39.364095 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:40.106104 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:40.127117 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:40.127349 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:40.147094 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:40.147333 SCSI Commands: Read6 command successful
 Oct 09 21:21:40.147492 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:40.168097 SCSI State: Information transfer phase: Status
 Oct 09 21:21:40.168329 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:40.168484 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:40.187956 SCSI State: Bus Free
 Oct 09 21:21:40.188131 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:40.188219 SCSI State: Selected by host ID 1
 Oct 09 21:21:40.188304 SCSI State: Command phase
 Oct 09 21:21:40.209093 SCSI State: Information transfer phase: Command
 Oct 09 21:21:40.209323 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:40.229115 SCSI Commands: Received command operand bytes: 8 21 0 0 16 0
 Oct 09 21:21:40.229356 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:40.447874 SCSI Commands: Target LUN = 0, LBA = 1376256, Blocks = 16
 Oct 09 21:21:40.448114 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:41.220104 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:41.240940 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:41.241059 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:41.241096 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:41.261099 SCSI Commands: Read6 command successful
 Oct 09 21:21:41.261333 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:41.261489 SCSI State: Information transfer phase: Status
 Oct 09 21:21:41.282111 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:41.282342 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:41.282498 SCSI State: Bus Free
 Oct 09 21:21:41.302099 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:41.302329 SCSI State: Selected by host ID 1
 Oct 09 21:21:41.302485 SCSI State: Command phase
 Oct 09 21:21:41.323113 SCSI State: Information transfer phase: Command
 Oct 09 21:21:41.323353 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:41.343107 SCSI Commands: Received command operand bytes: 8 21 128 0 16 0
 Oct 09 21:21:41.343339 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:41.559831 SCSI Commands: Target LUN = 0, LBA = 1409024, Blocks = 16
 Oct 09 21:21:41.560082 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:42.355099 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:42.375116 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:42.375356 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:42.375514 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:42.396107 SCSI Commands: Read6 command successful
 Oct 09 21:21:42.396341 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:42.396499 SCSI State: Information transfer phase: Status
 Oct 09 21:21:42.416102 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:42.416339 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:42.416497 SCSI State: Bus Free
 Oct 09 21:21:42.437128 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:42.437357 SCSI State: Selected by host ID 1
 Oct 09 21:21:42.437510 SCSI State: Command phase
 Oct 09 21:21:42.456938 SCSI State: Information transfer phase: Command
 Oct 09 21:21:42.457112 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:42.478101 SCSI Commands: Received command operand bytes: 8 22 0 0 16 0
 Oct 09 21:21:42.478335 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:42.695834 SCSI Commands: Target LUN = 0, LBA = 1441792, Blocks = 16
 Oct 09 21:21:42.696070 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:43.514102 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:43.534128 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:43.534360 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:43.534515 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:43.555095 SCSI Commands: Read6 command successful
 Oct 09 21:21:43.555329 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:43.575111 SCSI State: Information transfer phase: Status
 Oct 09 21:21:43.575355 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:43.575510 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:43.575716 SCSI State: Bus Free
 Oct 09 21:21:43.596127 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:43.596357 SCSI State: Selected by host ID 1
 Oct 09 21:21:43.596513 SCSI State: Command phase
 Oct 09 21:21:43.616103 SCSI State: Information transfer phase: Command
 Oct 09 21:21:43.616334 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:43.637102 SCSI Commands: Received command operand bytes: 8 22 128 0 16 0
 Oct 09 21:21:43.637338 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:43.855880 SCSI Commands: Target LUN = 0, LBA = 1474560, Blocks = 16
 Oct 09 21:21:43.856121 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:44.697106 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:44.718127 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:44.718356 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:44.718511 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:44.739102 SCSI Commands: Read6 command successful
 Oct 09 21:21:44.739340 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:44.739496 SCSI State: Information transfer phase: Status
 Oct 09 21:21:44.759104 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:44.759329 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:44.759487 SCSI State: Bus Free
 Oct 09 21:21:44.779097 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:44.779330 SCSI State: Selected by host ID 1
 Oct 09 21:21:44.779486 SCSI State: Command phase
 Oct 09 21:21:44.799942 SCSI State: Information transfer phase: Command
 Oct 09 21:21:44.800111 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:44.820112 SCSI Commands: Received command operand bytes: 8 23 0 0 16 0
 Oct 09 21:21:44.820354 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:45.039873 SCSI Commands: Target LUN = 0, LBA = 1507328, Blocks = 16
 Oct 09 21:21:45.040116 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:45.906098 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:45.926101 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:45.926334 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:45.926492 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:45.947122 SCSI Commands: Read6 command successful
 Oct 09 21:21:45.947360 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:45.947519 SCSI State: Information transfer phase: Status
 Oct 09 21:21:45.967093 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:45.967324 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:45.967481 SCSI State: Bus Free
 Oct 09 21:21:45.987935 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:45.988091 SCSI State: Selected by host ID 1
 Oct 09 21:21:45.988179 SCSI State: Command phase
 Oct 09 21:21:46.008135 SCSI State: Information transfer phase: Command
 Oct 09 21:21:46.008366 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:46.029097 SCSI Commands: Received command operand bytes: 8 23 128 0 16 0
 Oct 09 21:21:46.029330 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:46.247837 SCSI Commands: Target LUN = 0, LBA = 1540096, Blocks = 16
 Oct 09 21:21:46.248074 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:47.134103 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:47.155120 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:47.155354 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:47.175095 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:47.175331 SCSI Commands: Read6 command successful
 Oct 09 21:21:47.175488 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:47.196099 SCSI State: Information transfer phase: Status
 Oct 09 21:21:47.196331 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:47.196488 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:47.216152 SCSI State: Bus Free
 Oct 09 21:21:47.216402 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:47.216961 SCSI State: Selected by host ID 1
 Oct 09 21:21:47.217540 SCSI State: Command phase
 Oct 09 21:21:47.237094 SCSI State: Information transfer phase: Command
 Oct 09 21:21:47.237323 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:47.257105 SCSI Commands: Received command operand bytes: 8 24 0 0 16 0
 Oct 09 21:21:47.257345 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:47.475880 SCSI Commands: Target LUN = 0, LBA = 1572864, Blocks = 16
 Oct 09 21:21:47.476126 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:48.391984 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:48.412104 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:48.412347 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:48.412523 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:48.433127 SCSI Commands: Read6 command successful
 Oct 09 21:21:48.433360 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:48.433535 SCSI State: Information transfer phase: Status
 Oct 09 21:21:48.453101 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:48.453336 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:48.453507 SCSI State: Bus Free
 Oct 09 21:21:48.474103 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:48.474341 SCSI State: Selected by host ID 1
 Oct 09 21:21:48.474517 SCSI State: Command phase
 Oct 09 21:21:48.494126 SCSI State: Information transfer phase: Command
 Oct 09 21:21:48.494362 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:48.515099 SCSI Commands: Received command operand bytes: 8 24 128 0 16 0
 Oct 09 21:21:48.515332 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:48.731868 SCSI Commands: Target LUN = 0, LBA = 1605632, Blocks = 16
 Oct 09 21:21:48.732110 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:49.670105 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:49.690121 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:49.690351 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:49.690526 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:49.711101 SCSI Commands: Read6 command successful
 Oct 09 21:21:49.711344 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:49.731102 SCSI State: Information transfer phase: Status
 Oct 09 21:21:49.731341 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:49.731495 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:49.752110 SCSI State: Bus Free
 Oct 09 21:21:49.752347 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:49.752504 SCSI State: Selected by host ID 1
 Oct 09 21:21:49.752664 SCSI State: Command phase
 Oct 09 21:21:49.772103 SCSI State: Information transfer phase: Command
 Oct 09 21:21:49.772345 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:49.793106 SCSI Commands: Received command operand bytes: 8 25 0 0 16 0
 Oct 09 21:21:49.793345 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:50.011868 SCSI Commands: Target LUN = 0, LBA = 1638400, Blocks = 16
 Oct 09 21:21:50.012110 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:50.972104 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:50.993122 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:50.993357 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:51.013108 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:51.013353 SCSI Commands: Read6 command successful
 Oct 09 21:21:51.013533 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:51.034121 SCSI State: Information transfer phase: Status
 Oct 09 21:21:51.034362 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:51.034558 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:51.054101 SCSI State: Bus Free
 Oct 09 21:21:51.054336 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:51.054523 SCSI State: Selected by host ID 1
 Oct 09 21:21:51.054640 SCSI State: Command phase
 Oct 09 21:21:51.075098 SCSI State: Information transfer phase: Command
 Oct 09 21:21:51.075336 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:51.095117 SCSI Commands: Received command operand bytes: 8 25 128 0 16 0
 Oct 09 21:21:51.095356 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:51.315835 SCSI Commands: Target LUN = 0, LBA = 1671168, Blocks = 16
 Oct 09 21:21:51.316073 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:52.303098 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:52.324102 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:52.324333 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:52.324508 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:52.344127 SCSI Commands: Read6 command successful
 Oct 09 21:21:52.344362 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:52.344534 SCSI State: Information transfer phase: Status
 Oct 09 21:21:52.365100 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:52.365333 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:52.365503 SCSI State: Bus Free
 Oct 09 21:21:52.385102 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:52.385335 SCSI State: Selected by host ID 1
 Oct 09 21:21:52.385510 SCSI State: Command phase
 Oct 09 21:21:52.406126 SCSI State: Information transfer phase: Command
 Oct 09 21:21:52.406362 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:52.426091 SCSI Commands: Received command operand bytes: 8 26 0 0 16 0
 Oct 09 21:21:52.426335 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:52.643868 SCSI Commands: Target LUN = 0, LBA = 1703936, Blocks = 16
 Oct 09 21:21:52.644106 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:53.655098 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:53.675096 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:53.675327 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:53.675501 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:53.696122 SCSI Commands: Read6 command successful
 Oct 09 21:21:53.696351 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:53.696524 SCSI State: Information transfer phase: Status
 Oct 09 21:21:53.716105 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:53.716336 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:53.716513 SCSI State: Bus Free
 Oct 09 21:21:53.737105 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:53.737338 SCSI State: Selected by host ID 1
 Oct 09 21:21:53.737516 SCSI State: Command phase
 Oct 09 21:21:53.757127 SCSI State: Information transfer phase: Command
 Oct 09 21:21:53.757362 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:53.778102 SCSI Commands: Received command operand bytes: 8 26 128 0 16 0
 Oct 09 21:21:53.778337 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:53.995862 SCSI Commands: Target LUN = 0, LBA = 1736704, Blocks = 16
 Oct 09 21:21:53.996104 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:55.043095 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:55.064101 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:55.064333 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:55.064508 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:55.084126 SCSI Commands: Read6 command successful
 Oct 09 21:21:55.084360 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:55.084535 SCSI State: Information transfer phase: Status
 Oct 09 21:21:55.105097 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:55.105330 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:55.105503 SCSI State: Bus Free
 Oct 09 21:21:55.125106 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:55.125334 SCSI State: Selected by host ID 1
 Oct 09 21:21:55.125506 SCSI State: Command phase
 Oct 09 21:21:55.146130 SCSI State: Information transfer phase: Command
 Oct 09 21:21:55.146361 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:55.166105 SCSI Commands: Received command operand bytes: 8 27 0 0 16 0
 Oct 09 21:21:55.166339 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:55.383875 SCSI Commands: Target LUN = 0, LBA = 1769472, Blocks = 16
 Oct 09 21:21:55.384111 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:56.444027 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:56.465105 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:56.465342 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:56.465519 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:56.485127 SCSI Commands: Read6 command successful
 Oct 09 21:21:56.485361 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:56.485537 SCSI State: Information transfer phase: Status
 Oct 09 21:21:56.506105 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:56.506339 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:56.506508 SCSI State: Bus Free
 Oct 09 21:21:56.526106 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:56.526341 SCSI State: Selected by host ID 1
 Oct 09 21:21:56.526516 SCSI State: Command phase
 Oct 09 21:21:56.547119 SCSI State: Information transfer phase: Command
 Oct 09 21:21:56.547352 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:56.567101 SCSI Commands: Received command operand bytes: 8 27 128 0 16 0
 Oct 09 21:21:56.567338 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:56.783835 SCSI Commands: Target LUN = 0, LBA = 1802240, Blocks = 16
 Oct 09 21:21:56.784073 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:57.865127 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:57.886087 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:57.886334 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:57.906109 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:57.906348 SCSI Commands: Read6 command successful
 Oct 09 21:21:57.906522 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:57.927103 SCSI State: Information transfer phase: Status
 Oct 09 21:21:57.927349 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:57.927508 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:57.947096 SCSI State: Bus Free
 Oct 09 21:21:57.947333 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:57.947934 SCSI State: Selected by host ID 1
 Oct 09 21:21:57.948375 SCSI State: Command phase
 Oct 09 21:21:57.968120 SCSI State: Information transfer phase: Command
 Oct 09 21:21:57.968369 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:57.988107 SCSI Commands: Received command operand bytes: 8 28 0 0 16 0
 Oct 09 21:21:57.988335 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:58.207835 SCSI Commands: Target LUN = 0, LBA = 1835008, Blocks = 16
 Oct 09 21:21:58.208069 SCSI State: Information transfer phase: Data in
 Oct 09 21:21:59.315099 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:21:59.336130 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:21:59.336367 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:21:59.336538 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:21:59.356104 SCSI Commands: Read6 command successful
 Oct 09 21:21:59.356337 SCSI State: Status.  Status byte = 0
 Oct 09 21:21:59.356515 SCSI State: Information transfer phase: Status
 Oct 09 21:21:59.377106 SCSI State: Message In.  Message byte = 0
 Oct 09 21:21:59.377347 SCSI State: Information transfer phase: Message in
 Oct 09 21:21:59.377518 SCSI State: Bus Free
 Oct 09 21:21:59.397147 SCSI State: Information transfer phase: Data out
 Oct 09 21:21:59.397398 SCSI State: Selected by host ID 1
 Oct 09 21:21:59.397582 SCSI State: Command phase
 Oct 09 21:21:59.418106 SCSI State: Information transfer phase: Command
 Oct 09 21:21:59.418347 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:21:59.438101 SCSI Commands: Received command operand bytes: 8 28 128 0 16 0
 Oct 09 21:21:59.438337 SCSI Commands: READ command (0x08) received
 Oct 09 21:21:59.655868 SCSI Commands: Target LUN = 0, LBA = 1867776, Blocks = 16
 Oct 09 21:21:59.656105 SCSI State: Information transfer phase: Data in
 Oct 09 21:22:00.794104 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:22:00.814106 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:22:00.814342 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:22:00.814515 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:22:00.835128 SCSI Commands: Read6 command successful
 Oct 09 21:22:00.835362 SCSI State: Status.  Status byte = 0
 Oct 09 21:22:00.835687 SCSI State: Information transfer phase: Status
 Oct 09 21:22:00.855097 SCSI State: Message In.  Message byte = 0
 Oct 09 21:22:00.855329 SCSI State: Information transfer phase: Message in
 Oct 09 21:22:00.855656 SCSI State: Bus Free
 Oct 09 21:22:00.875953 SCSI State: Information transfer phase: Data out
 Oct 09 21:22:00.876189 SCSI State: Selected by host ID 1
 Oct 09 21:22:00.876298 SCSI State: Command phase
 Oct 09 21:22:00.896009 SCSI State: Information transfer phase: Command
 Oct 09 21:22:00.896246 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:22:00.917044 SCSI Commands: Received command operand bytes: 8 29 0 0 16 0
 Oct 09 21:22:00.917216 SCSI Commands: READ command (0x08) received
 Oct 09 21:22:01.131863 SCSI Commands: Target LUN = 0, LBA = 1900544, Blocks = 16
 Oct 09 21:22:01.132103 SCSI State: Information transfer phase: Data in
 Oct 09 21:22:02.289105 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:22:02.309132 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:22:02.309364 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:22:02.309537 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:22:02.330102 SCSI Commands: Read6 command successful
 Oct 09 21:22:02.330338 SCSI State: Status.  Status byte = 0
 Oct 09 21:22:02.330513 SCSI State: Information transfer phase: Status
 Oct 09 21:22:02.350108 SCSI State: Message In.  Message byte = 0
 Oct 09 21:22:02.350342 SCSI State: Information transfer phase: Message in
 Oct 09 21:22:02.350515 SCSI State: Bus Free
 Oct 09 21:22:02.371120 SCSI State: Information transfer phase: Data out
 Oct 09 21:22:02.371353 SCSI State: Selected by host ID 1
 Oct 09 21:22:02.371669 SCSI State: Command phase
 Oct 09 21:22:02.391100 SCSI State: Information transfer phase: Command
 Oct 09 21:22:02.391336 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:22:02.412104 SCSI Commands: Received command operand bytes: 8 29 128 0 16 0
 Oct 09 21:22:02.412345 SCSI Commands: READ command (0x08) received
 Oct 09 21:22:02.631874 SCSI Commands: Target LUN = 0, LBA = 1933312, Blocks = 16
 Oct 09 21:22:02.632116 SCSI State: Information transfer phase: Data in
 Oct 09 21:22:03.808106 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:22:03.829110 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:22:03.829345 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:22:03.829521 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:22:03.849127 SCSI Commands: Read6 command successful
 Oct 09 21:22:03.849359 SCSI State: Status.  Status byte = 0
 Oct 09 21:22:03.849535 SCSI State: Information transfer phase: Status
 Oct 09 21:22:03.870102 SCSI State: Message In.  Message byte = 0
 Oct 09 21:22:03.870334 SCSI State: Information transfer phase: Message in
 Oct 09 21:22:03.870506 SCSI State: Bus Free
 Oct 09 21:22:03.890102 SCSI State: Information transfer phase: Data out
 Oct 09 21:22:03.890336 SCSI State: Selected by host ID 1
 Oct 09 21:22:03.890511 SCSI State: Command phase
 Oct 09 21:22:03.911117 SCSI State: Information transfer phase: Command
 Oct 09 21:22:03.911357 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:22:03.931131 SCSI Commands: Received command operand bytes: 8 30 0 0 16 0
 Oct 09 21:22:03.931362 SCSI Commands: READ command (0x08) received
 Oct 09 21:22:04.147875 SCSI Commands: Target LUN = 0, LBA = 1966080, Blocks = 16
 Oct 09 21:22:04.148113 SCSI State: Information transfer phase: Data in
 Oct 09 21:22:05.348112 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:22:05.369109 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:22:05.369354 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:22:05.389107 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:22:05.389347 SCSI Commands: Read6 command successful
 Oct 09 21:22:05.389506 SCSI State: Status.  Status byte = 0
 Oct 09 21:22:05.410105 SCSI State: Information transfer phase: Status
 Oct 09 21:22:05.410334 SCSI State: Message In.  Message byte = 0
 Oct 09 21:22:05.410489 SCSI State: Information transfer phase: Message in
 Oct 09 21:22:05.430106 SCSI State: Bus Free
 Oct 09 21:22:05.430345 SCSI State: Information transfer phase: Data out
 Oct 09 21:22:05.430884 SCSI State: Selected by host ID 1
 Oct 09 21:22:05.431556 SCSI State: Command phase
 Oct 09 21:22:05.451099 SCSI State: Information transfer phase: Command
 Oct 09 21:22:05.451333 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:22:05.471113 SCSI Commands: Received command operand bytes: 8 30 128 0 16 0
 Oct 09 21:22:05.471354 SCSI Commands: READ command (0x08) received
 Oct 09 21:22:05.691836 SCSI Commands: Target LUN = 0, LBA = 1998848, Blocks = 16
 Oct 09 21:22:05.692074 SCSI State: Information transfer phase: Data in
 Oct 09 21:22:06.917057 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:22:06.938066 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:22:06.938243 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:22:06.938369 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:22:06.958129 SCSI Commands: Read6 command successful
 Oct 09 21:22:06.958361 SCSI State: Status.  Status byte = 0
 Oct 09 21:22:06.958536 SCSI State: Information transfer phase: Status
 Oct 09 21:22:06.979117 SCSI State: Message In.  Message byte = 0
 Oct 09 21:22:06.979356 SCSI State: Information transfer phase: Message in
 Oct 09 21:22:06.979511 SCSI State: Bus Free
 Oct 09 21:22:06.999100 SCSI State: Information transfer phase: Data out
 Oct 09 21:22:06.999337 SCSI State: Selected by host ID 1
 Oct 09 21:22:06.999987 SCSI State: Command phase
 Oct 09 21:22:07.019105 SCSI State: Information transfer phase: Command
 Oct 09 21:22:07.019345 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:22:07.040016 SCSI Commands: Received command operand bytes: 8 31 0 0 16 0
 Oct 09 21:22:07.040254 SCSI Commands: READ command (0x08) received
 Oct 09 21:22:07.259881 SCSI Commands: Target LUN = 0, LBA = 2031616, Blocks = 16
 Oct 09 21:22:07.260114 SCSI State: Information transfer phase: Data in
 Oct 09 21:22:08.506103 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:22:08.527098 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:22:08.527327 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:22:08.547122 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:22:08.547354 SCSI Commands: Read6 command successful
 Oct 09 21:22:08.547540 SCSI State: Status.  Status byte = 0
 Oct 09 21:22:08.568108 SCSI State: Information transfer phase: Status
 Oct 09 21:22:08.568342 SCSI State: Message In.  Message byte = 0
 Oct 09 21:22:08.568514 SCSI State: Information transfer phase: Message in
 Oct 09 21:22:08.588105 SCSI State: Bus Free
 Oct 09 21:22:08.588340 SCSI State: Information transfer phase: Data out
 Oct 09 21:22:08.588591 SCSI State: Selected by host ID 1
 Oct 09 21:22:08.589273 SCSI State: Command phase
 Oct 09 21:22:08.609101 SCSI State: Information transfer phase: Command
 Oct 09 21:22:08.609339 SCSI Commands: CDB byte 0 decode: Command group 0 (6 bytes) opcode 8
 Oct 09 21:22:08.629139 SCSI Commands: Received command operand bytes: 8 31 128 0 16 0
 Oct 09 21:22:08.629367 SCSI Commands: READ command (0x08) received
 Oct 09 21:22:08.847838 SCSI Commands: Target LUN = 0, LBA = 2064384, Blocks = 16
 Oct 09 21:22:08.848078 SCSI State: Information transfer phase: Data in
 Oct 09 21:22:10.124104 File system: filesystemOpenLunForRead(): Successful
 Oct 09 21:22:10.145103 SCSI Commands: Transferring requested blocks to the host...
 Oct 09 21:22:10.145335 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 
 Oct 09 21:22:10.145929 File system: filesystemCloseLunForRead(): Completed
 Oct 09 21:22:10.165130 SCSI Commands: Read6 command successful
 Oct 09 21:22:10.165361 SCSI State: Status.  Status byte = 0
 Oct 09 21:22:10.165912 SCSI State: Information transfer phase: Status
 Oct 09 21:22:10.186107 SCSI State: Message In.  Message byte = 0
 Oct 09 21:22:10.186340 SCSI State: Information transfer phase: Message in
 Oct 09 21:22:10.186879 SCSI State: Bus Free
 Oct 09 21:22:10.395882 SCSI State: Information transfer phase: Data out