Skip to content

Instantly share code, notes, and snippets.

@chrstphrchvz

chrstphrchvz/lsblk.out

Last active January 21, 2017 09:58
Show Gist options
  • Save chrstphrchvz/a229c595423eff0e8b07627caa01ec43 to your computer and use it in GitHub Desktop.
Save chrstphrchvz/a229c595423eff0e8b07627caa01ec43 to your computer and use it in GitHub Desktop.
Download ZIP
smartdumps
Raw
lsblk.out
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 931.5G 0 disk
sr0 11:0 1 1024M 0 rom
fd0 2:0 1 4K 0 disk
sdc 8:32 1 14.9G 0 disk
├─sdc2 8:34 1 1.5G 0 part [SWAP]
├─sdc3 8:35 1 13G 0 part /mnt2/rockstor_rockstor
└─sdc1 8:33 1 500M 0 part /boot
sda 8:0 0 931.5G 0 disk /mnt2/data
Raw
smart--info.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.8.7-1.el7.elrepo.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: XXXXXXXX
LU WWN Device Id: 5 000c50 000000000
Firmware Version: HP34
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Jan 15 18:13:36 2017 CST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Raw
smart-a.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.8.7-1.el7.elrepo.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: XXXXXXXX
LU WWN Device Id: 5 000c50 000000000
Firmware Version: HP34
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Jan 15 18:13:35 2017 CST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 104) minutes.
SCT capabilities: (0x303b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 119 093 006 Pre-fail Always - 233673552
3 Spin_Up_Time 0x0023 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 218
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002f 071 060 030 Pre-fail Always - 12705352
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1240
10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 214
180 Unknown_HDD_Attribute 0x002a 100 100 000 Old_age Always - 5419160
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 230
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 064 045 Old_age Always - 31 (Min/Max 22/32)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 157
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3879
194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 16 0 0 0)
196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 230 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 230 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:37.257 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:36.370 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:36.350 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:36.261 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:32.647 READ FPDMA QUEUED
Error 229 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:32.647 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:31.769 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:31.741 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:31.660 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:28.038 READ FPDMA QUEUED
Error 228 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:28.038 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:27.159 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:27.132 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:27.051 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:23.444 READ FPDMA QUEUED
Error 227 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:23.444 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:22.507 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:22.507 SET FEATURES [Enable write cache]
ef 90 03 00 00 00 a0 00 00:16:22.507 SET FEATURES [Disable SATA feature]
00 00 00 00 00 00 00 ff 00:16:22.458 NOP [Abort queued commands]
Error 226 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:18.850 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:16:18.819 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:18.741 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:15.132 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:14.249 SET FEATURES [Disable SATA feature]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1240 -
# 2 Short offline Completed without error 00% 1240 -
# 3 Extended offline Completed without error 00% 1154 -
# 4 Short offline Completed without error 00% 1152 -
# 5 Extended offline Completed without error 00% 1008 -
# 6 Extended offline Interrupted (host reset) 00% 1007 -
# 7 Extended offline Interrupted (host reset) 90% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Raw
smart-c.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.8.7-1.el7.elrepo.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 104) minutes.
SCT capabilities: (0x303b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
Raw
smart-H--info.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.8.7-1.el7.elrepo.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: XXXXXXXX
LU WWN Device Id: 5 000c50 000000000
Firmware Version: HP34
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Jan 15 18:13:36 2017 CST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Raw
smart-l-error.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.8.7-1.el7.elrepo.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 230 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 230 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:37.257 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:36.370 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:36.350 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:36.261 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:32.647 READ FPDMA QUEUED
Error 229 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:32.647 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:31.769 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:31.741 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:31.660 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:28.038 READ FPDMA QUEUED
Error 228 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:28.038 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:27.159 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:27.132 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:27.051 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:23.444 READ FPDMA QUEUED
Error 227 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:23.444 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:22.507 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 a0 00 00:16:22.507 SET FEATURES [Enable write cache]
ef 90 03 00 00 00 a0 00 00:16:22.507 SET FEATURES [Disable SATA feature]
00 00 00 00 00 00 00 ff 00:16:22.458 NOP [Abort queued commands]
Error 226 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 fc 39 00 Error: UNC at LBA = 0x0039fc80 = 3800192
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 68 20 fc 39 40 00 00:16:18.850 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:16:18.819 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 00:16:18.741 NOP [Abort queued commands]
60 00 68 20 fc 39 40 00 00:16:15.132 READ FPDMA QUEUED
ef 90 03 00 00 00 a0 00 00:16:14.249 SET FEATURES [Disable SATA feature]
Raw
smart-l-selftest-l-selective.out
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.8.7-1.el7.elrepo.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1240 -
# 2 Short offline Completed without error 00% 1240 -
# 3 Extended offline Completed without error 00% 1154 -
# 4 Short offline Completed without error 00% 1152 -
# 5 Extended offline Completed without error 00% 1008 -
# 6 Extended offline Interrupted (host reset) 00% 1007 -
# 7 Extended offline Interrupted (host reset) 90% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment