build iotjs for nuttx on stm32f4

oneshot.sh

#!/bin/bash

# This script assumes that you have all dependencies on Ubuntu 14.04
# It will takes about 10 or more minites due to repo cloning.
#
# ./harmony ----- iotjs
#            |
#            ---- nuttx

mkdir harmony
cd harmony

echo '1. install dependencies';
sudo apt-get install autoconf libtool gperf flex bison autoconf2.13
sudo apt-get install libncurses-dev
sudo apt-get install libusb-1.0-0-dev
sudo apt-get install libsgutils2-dev

echo '2. kconfig frontend';
if [[ ! -d "kconfig-frontends" ]]; then
    git clone https://github.com/jameswalmsley/kconfig-frontends.git
    cd kconfig-frontends
    ./bootstrap
    ./configure --enable-mconf
    make
    sudo make install
    sudo ldconfig
    cd ..
fi

echo '3. Nuttx Setting(wait for a while)';
if [[ ! -d "nuttx" ]]; then
    mkdir nuttx
    cd nuttx
    git init

    git submodule add https://bitbucket.org/seanshpark/nuttx.git nuttx
    git submodule add https://bitbucket.org/seanshpark/nuttx_apps.git apps

    cd apps
    git checkout iotjs
    cd ../nuttx
    git checkout iotjs
    git submodule update --init --recursive

    cd tools
    ./configure.sh stm32f4discovery/iotjs
    cd ..

    #make menuconfig
    touch .config

    cd tools
    ./mkromfsimg.sh ..
    sed -i 's/unsigned char/const unsigned char/' nsh_romfsimg.h
    sed -i 's/unsigned char/const unsigned char/' nsh_romfsimg.h
    cp nsh_romfsimg.h ../../apps/nshlib/nsh_romfsimg_iotjs.h
    cd ..

    # silly
    make
    cd ../..
fi

echo '3. Nuttx Setting(wait for a while)';
if [[ ! -d "stlink" ]]; then
    git clone https://github.com/texane/stlink.git
    cd stlink

    ./autogen.sh
    ./configure
    make
    cd ..
fi

echo '4. IoT.js cloning....'
if [[ ! -d "iotjs" ]]; then
    git clone https://github.com/Samsung/iotjs.git
fi

echo '5. Now, Build IoT.js for nuttx on stm32f4discovery'
cd iotjs
rm -rf build
tools/build.py --buildtype=release --target-arch=arm --target-os=nuttx --nuttx-home=../nuttx/nuttx --buildlib --jerry-heaplimit=78 --target-board=stm32f4dis
cp ./build/arm-nuttx/release/lib/libiotjs.a ../nuttx/nuttx/lib/liblibiotjs.a
cp ./build/arm-nuttx/release/lib/libjerrycore.a ../nuttx/nuttx/lib/libjerrycore.a
cp ./build/arm-nuttx/release/lib/libtuv.a ../nuttx/nuttx/lib/libtuv.a
cp ./build/arm-nuttx/release/lib/libhttpparser.a ../nuttx/nuttx/lib/libhttpparser.a
cp ./build/arm-nuttx/release/lib/libfdlibm.a ../nuttx/nuttx/lib/libfdlibm.a

cd ..

echo '6. Build nuttx...'
cd nuttx/nuttx
make

echo 'Build Process Done.'

echo "Now, try to flash bin into stm32f4[Enter]"
read flash
echo "Flashing...."
sudo ../../stlink/st-flash write nuttx.bin 0x8000000