cifilter

The HP2 is a wall-mounted shelf for your HomePod mini with an integrated MagSafe charging dock compatible with any iPhone 12. The HP2 is perfect for your bedside, bathroom [(that’s where I have mine!) WTF, no, delete this LOL], or kitchen to have a clean-looking way to charge your iPhone 12 and listen to music while multitasking.

A 60w USB-C PD power supply with a 1-meter-long, 2-prong cable (for US electrical outlets) is included to power the MagSafe charger and the HomePod mini with only one cable to plug in. The HomePod mini and MagSafe cables have a space to tuck neatly into the back next to the power supply. Since the HP2 has its own power supply, the power supply that came with your HomePod mini isn’t needed and can be used for something else.

Assembly Instructions: http://aawa.re/hp2howto

MagSafe charger and HomePod mini are not included. Mounting screws are not included because they will vary depending on the material of your wall.

Follow @shopaaware on Instagram to see behind the scenes!

cifilter

A plastic insert for mounting your iPhone 12 MagSafe charger puck into a standard 3 3/32” grommet hole commonly found on desks. Includes a channel for the cable to route cleanly down below the table surface and a hole to easily push the MagSafe puck out from behind. This large model hides the cable completely behind the plastic shroud for the cleanest possible look. 

This insert will fit in the pre-drilled hole of an IKEA desk. It is also designed to fit into a hole made by the large sized hole saw included with the IKEA Fixa hole saw kit: www.ikea.com/us/en/p/fixa-5-piece-hole-saw-set-20302332/

If you have a different sized grommet hole and you’d like a custom sized MagSafe insert please message me, I am happy to make a custom order for you!

MagSafe charger not included. 

Follow @shopaaware on Instagram to see behind the scenes!

cifilter

This plastic insert is used for mounting your iPhone 12 MagSafe charger puck into a standard 2.5" grommet hole. Included is a channel for the cable to route cleanly down below the table surface and a hole to easily push out the MagSafe puck from the back side.

This is designed to fit into a hole made by the medium sized hole saw included with the IKEA Fixa hole saw kit: www.ikea.com/us/en/p/fixa-5-piece-hole-saw-set-20302332/

If you have a different sized grommet hole and you’d like a custom sized MagSafe insert, please message me. I am happy to make a custom order for you!

MagSafe charger not included.

Follow @shopaaware on Instagram to see behind the scenes!

cifilter

IMPORTANT: This item is sold at a cheaper price because it has defects. If you want this item at the usual, high-standards quality, you can order it here: https://etsy.me/2KZBtwl

About B stock items:

Even the best 3D printer has a bad day sometimes. These B stock items are slightly defective versions of my normal products that still function just fine but have visual imperfections when inspected closely. As a result, though, they are offered at a cheaper price.

The last two pictures show an example defect. No two defects will be exactly the same, and the product you receive may have a different defect.

THERE ARE NO RETURNS OR EXCHANGES FOR B STOCK (because I am a tyrannical Big Banking fat cat)

cifilter

This stand charges two Apple Watches and can be mounted flush to a surface. It is made to fit into a standard 2.5” diameter desk grommet hole. The cables from the watch chargers can be routed neatly down the back and under the table surface for a tidy look with no loose cables.

If you have a different sized grommet hole and you’d like a custom sized version of this product, please message me. I am happy to make a custom order for you!

Apple Watch chargers not included.

Follow @shopaaware on Instagram to see behind the scenes!

This is a 3D printed item and the creation process can result in small imperfections or minor variations in surface finish and texture. I have a high standard for print quality and I inspect each item, finish it by hand, and test its fit before shipping it to you.

cifilter

The MS3 flush-mounted MagSafe dock holds your iPhone 12 or iPhone 12 mini securely at a comfortable viewing angle and is made to fit flush into a standard sized desk grommet for a neat and tidy installation. The USB cable is routed cleanly down the back of the dock and under the desk for a minimal look with no loose wires. A hole behind the MagSafe puck lets you easily push it out from behind when you want to take the charger with you.

This dock is meant to fit into a hole drilled into a table top for the cleanest possible look. It is not meant to be a freestanding dock.

Fits iPhone 12, iPhone 12 Pro, and iPhone 12 mini. iPhone 12 Pro Max is not supported. Product photos feature the iPhone 12 mini.

MagSafe charger not included.

Follow @shopaaware on Instagram to see behind the scenes!

cifilter

This is a great way to mount a MagSafe puck for iPhone 12 to your wall. Designed in two parts for easy mounting, just fix the round mount to the wall with screws, insert your MagSafe puck into the main piece, and pop it onto the wall mount. The main piece is easily removed from the wall mount by pulling up so you can pop out the MagSafe puck and take it with you for travel. When your iPhone is stuck to the MagSafe puck, pull down to separate your iPhone while leaving the dock on the wall.

MagSafe charger and mounting screws not included.       // Standardize

Follow @shopaaware on Instagram to see behind the scenes!

This is a 3D printed item and the creation process can result in small imperfections or minor variations in surface finish and texture. I have a high standard for print quality and I inspect each item, finish it by hand, and test its fit before shipping it to you.      // Standardize

cifilter

The HP1 is an easy way to cleanly mount your HomePod mini to the wall. The rubber foot of the HomePod mini fits tightly into a custom indent for a secure fit that holds the HomePod mini without needing a full-sized shelf. This mount is a great way to set up a discreet surround sound system with a stereo pair or to just place a HomePod mini in a small space where you don’t have room for it on a table

The wall side of the mount has a channel perfectly sized to route the HomePod mini power cable down the back and straight out of the bottom. This item is printed with premium filament at an increased density to make a product that is more than strong enough to bear the weight of a HomePod mini securely.

HomePod mini is not included. Screws are not included, as the type of screws you need will depend on the material of your wall.    // Standardize this, copy it to a note, and reuse it for CONSISTENCY! 😡

Follow @shopaaware on Instagram to see behind the scenes!

Note: This is a 3D printed item, and the creation p

cifilter

You can’t use a MagSafe charger with a wallet on your iPhone, so where do you put it? On a special wall mounted dock, of course!

The WL1 wall-mounted MagSafe wallet dock will hold your wallet securely to the wall with magnets. No more throwing the wallet on a table and forgetting where you left it; now it has a special place to go. The WL1 is sized perfectly to match the footprint of the MagSafe wallet, so it will disappear behind the wallet when in use.

There are holes in the back for screw mounting, but this can also be easily mounted with Command adhesive strips since MagSafe wallets are very lightweight.

MagSafe wallet not included. Screws are also not included because they will vary depending on the material of your wall.

Follow @shopaaware on Instagram to see behind the scenes!

cifilter

class CapsuleRoundedView: UIView {
    
    override func layoutSubviews() {
        super.layoutSubviews()   
        self.layer.cornerRadius = self.bounds.height / 2.0
    }
    
}