Last active
October 1, 2015 04:06
-
-
Save cjcliffe/50551d25f65b73e2d7db to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ```Ton@TM-MBP:/Users/Ton>/Applications/CubicSDR.app/Contents/MacOS/CubicSDR | |
| Loading:: configuration file '/Users/Ton/Library/Application Support/CubicSDR/config.xml' | |
| Loaded PPM for device 'Generic RTL2832U OEM :: 00000001' at 0ppm | |
| Loaded I/Q Swap for device 'Generic RTL2832U OEM :: 00000001' as not swapped | |
| Loaded Direct Sampling Mode for device 'Generic RTL2832U OEM :: 00000001': off | |
| Loaded offset for device 'Generic RTL2832U OEM :: 00000001' at 0Hz | |
| SoapySDR init.. | |
| API Version: v0.3.0-g603da6be | |
| ABI Version: v0.3-0 | |
| Install root: /usr/local | |
| Module found: /usr/local/lib/SoapySDR/modules/libsdrPlaySupport.so | |
| Loading modules... done | |
| Available factories...null, sdrplay | |
| mir_sdr_Init: starting hardware initialization | |
| mir_sdr_Init: gR=40dB fs=2.048MHz rf=222.064MHz bw=1.536MHz if=0.000MHz | |
| mir_sdr_2500_Init(2) | |
| mir_sdr_usb_Init() | |
| mir_sdr_usb_USB DLL: Revision 0.1.1 | |
| Opened device with idVendor = 0x1df7 idProduct = 0x2500 fwVersion = 0x0206 | |
| Msg: libusb_get_configuration() = 1 | |
| mir_sdr_2500 attachFn(hnd, 0x0206, 1, 0) | |
| mir_sdr_usb_SetInterface(2) | |
| mir_sdr_2500_GetFnAddr() | |
| mir_sdr_2500_Init: fnaddr = 2 detected, trying to change... | |
| mir_sdr_2500_GetFnAddr() | |
| mir_sdr_2500_Init: fnaddr = 6 | |
| mir_sdr_2500_SetRegister(0x05, 0x00000c) | |
| mir_sdr_2500_SetRegister(0x09, 0x00000e) | |
| mir_sdr_2500_SetRegister(0x00, 0x000200) | |
| mir_sdr_2500_Init: adjusting squelch trim 0x1, rx gating enable 1, tx_trim 0, reg2 = 0x4801 | |
| mir_sdr_2500_SetRegister(0x02, 0x004801) | |
| mir_sdr_2500_SetRegister(0x09, 0x28bb85) | |
| mir_sdr_2500_SetRegister(0x08, 0x00fa80) | |
| mir_sdr_2500_SetRegister(0x07, 0x000005) | |
| initHw: Register7 = 0x000005 | |
| mir_sdr_2500_SetRegister(0x09, 0x04f440) | |
| initHw: Tuner Register0 = 0x04f440 | |
| mir_sdr_2500_StreamInit(0, 393216) | |
| mir_sdr_usb_StreamInit(0, 393216) | |
| mir_sdr_2500_StartRx() | |
| mir_sdr_usb_FlushLocalBuffer() | |
| mir_sdr_SetFs: Sample Freq requested 2047999.978065 | |
| mir_sdr_2500_SetRegister(0x04, 0x0624dd) | |
| mir_sdr_2500_SetRegister(0x03, 0x01181f) | |
| mir_sdr_SetFs: Fs->FsNomHz+dFsHz=2048000.0+0.0Hz=2048000.0Hz FsToggle->1 | |
| mir_sdr_2500_SetRegister(0x09, 0x000003) | |
| mir_sdr_2500_SetRegister(0x09, 0x250202) | |
| mir_sdr_SetRf: f->222064000.000Hz (int=25 frac=20 afc=0) fSynth:3553024000.000 | |
| mir_sdr_SetRf: Rf->RfNomHz+dRfHz+LifHz+Lif1Hz=222064000.0+0.0+0.0Hz+0.0Hz=222064000.0Hz RfToggle->1 | |
| mir_sdr_2500_SetRegister(0x09, 0x032101) | |
| mir_sdr_SetGr: GR->40[16,24,0,0] gRset->0x210 DCCALmode=4 DCCALspd=1 GrToggle->1 | |
| setToggleStates: initialising sampNum=0x0002041a, gainSetting=0x210, FsToggle=0, RfToggle=1, GrToggle=1 | |
| setToggleStates: initialising Fs=2047999.978, Rf=222064000.000, Gr=40 | |
| mir_sdr_2500_StopRx() | |
| mir_sdr_2500_StreamUninit() | |
| mir_sdr_usb_StreamUninit(1) | |
| mir_sdr_2500_SetRegister(0x08, 0x006280) | |
| mir_sdr_2500_Uninit() | |
| mir_sdr_2500_SetRegister(0x09, 0x063000) | |
| mir_sdr_2500_SetRegister(0x09, 0x00800e) | |
| mir_sdr_2500_SetRegister(0x03, 0x091300) | |
| mir_sdr_2500_SetRegister(0x05, 0x000004) | |
| mir_sdr_usb_Uninit() | |
| Releasing interface in mir_sdr_usb_Uninit() | |
| Closing driver handle in mir_sdr_usb_Uninit() | |
| Closed driver handle in mir_sdr_usb_Uninit() | |
| Closed eventThread in mir_sdr_usb_Uninit() | |
| Exited libusb in mir_sdr_usb_Uninit() | |
| mir_sdr_usb_Uninit() completed | |
| Found device 0 | |
| driver = sdrplay | |
| label = SDRPlay Device (experimental) | |
| Make device driver=sdrplay,label=SDRPlay Device (experimental) | |
| mir_sdr_Init: starting hardware initialization | |
| mir_sdr_Init: gR=40dB fs=2.048MHz rf=222.064MHz bw=1.536MHz if=0.000MHz | |
| mir_sdr_2500_Init(2) | |
| mir_sdr_usb_Init() | |
| mir_sdr_usb_USB DLL: Revision 0.1.1 | |
| Opened device with idVendor = 0x1df7 idProduct = 0x2500 fwVersion = 0x0206 | |
| Msg: libusb_get_configuration() = 1 | |
| mir_sdr_2500 attachFn(hnd, 0x0206, 1, 0) | |
| mir_sdr_usb_SetInterface(2) | |
| mir_sdr_2500_GetFnAddr() | |
| mir_sdr_2500_Init: fnaddr = 2 detected, trying to change... | |
| mir_sdr_2500_GetFnAddr() | |
| mir_sdr_2500_Init: fnaddr = 6 | |
| mir_sdr_2500_SetRegister(0x05, 0x00000c) | |
| mir_sdr_2500_SetRegister(0x09, 0x00000e) | |
| mir_sdr_2500_SetRegister(0x00, 0x000200) | |
| mir_sdr_2500_Init: adjusting squelch trim 0x1, rx gating enable 1, tx_trim 0, reg2 = 0x4801 | |
| mir_sdr_2500_SetRegister(0x02, 0x004801) | |
| mir_sdr_2500_SetRegister(0x09, 0x28bb85) | |
| mir_sdr_2500_SetRegister(0x08, 0x00fa80) | |
| mir_sdr_2500_SetRegister(0x07, 0x000005) | |
| initHw: Register7 = 0x000005 | |
| mir_sdr_2500_SetRegister(0x09, 0x04f440) | |
| initHw: Tuner Register0 = 0x04f440 | |
| mir_sdr_2500_StreamInit(0, 393216) | |
| mir_sdr_usb_StreamInit(0, 393216) | |
| mir_sdr_2500_StartRx() | |
| mir_sdr_usb_FlushLocalBuffer() | |
| mir_sdr_SetFs: Sample Freq requested 2047999.978065 | |
| mir_sdr_2500_SetRegister(0x04, 0x0624dd) | |
| mir_sdr_2500_SetRegister(0x03, 0x01181f) | |
| mir_sdr_SetFs: Fs->FsNomHz+dFsHz=2048000.0+0.0Hz=2048000.0Hz FsToggle->1 | |
| mir_sdr_2500_SetRegister(0x09, 0x000003) | |
| mir_sdr_2500_SetRegister(0x09, 0x250202) | |
| mir_sdr_SetRf: f->222064000.000Hz (int=25 frac=20 afc=0) fSynth:3553024000.000 | |
| mir_sdr_SetRf: Rf->RfNomHz+dRfHz+LifHz+Lif1Hz=222064000.0+0.0+0.0Hz+0.0Hz=222064000.0Hz RfToggle->1 | |
| mir_sdr_2500_SetRegister(0x09, 0x032101) | |
| mir_sdr_SetGr: GR->40[16,24,0,0] gRset->0x210 DCCALmode=4 DCCALspd=1 GrToggle->1 | |
| setToggleStates: initialising sampNum=0x00020642, gainSetting=0x210, FsToggle=0, RfToggle=0, GrToggle=0 | |
| setToggleStates: initialising Fs=2047999.978, Rf=222064000.000, Gr=40 | |
| mir_sdr_2500_StopRx() | |
| mir_sdr_2500_StreamUninit() | |
| mir_sdr_usb_StreamUninit(1) | |
| mir_sdr_2500_SetRegister(0x08, 0x006280) | |
| mir_sdr_2500_Uninit() | |
| mir_sdr_2500_SetRegister(0x09, 0x063000) | |
| mir_sdr_2500_SetRegister(0x09, 0x00800e) | |
| mir_sdr_2500_SetRegister(0x03, 0x091300) | |
| mir_sdr_2500_SetRegister(0x05, 0x000004) | |
| mir_sdr_usb_Uninit() | |
| Releasing interface in mir_sdr_usb_Uninit() | |
| Closing driver handle in mir_sdr_usb_Uninit() | |
| Closed driver handle in mir_sdr_usb_Uninit() | |
| Closed eventThread in mir_sdr_usb_Uninit() | |
| Exited libusb in mir_sdr_usb_Uninit() | |
| mir_sdr_usb_Uninit() completed | |
| mir_sdr_version=1.100000 | |
| Spectrum visual data thread sStSpSaDeDrRcRt t etrpdhuo.rms | |
| e tav-dip rsiouncaielts isdaialntigaz ittnhhgrr.ee.aa | |
| dd Usssttiaarrnttgee ddd..e. | |
| v | |
| ice #0 | |
| mir_sdr_Init: starting hardware initialization | |
| mir_sdr_Init: gR=40dB fs=2.048MHz rf=222.064MHz bw=1.536MHz if=0.000MHz | |
| mir_sdr_2500_Init(2) | |
| mir_sdr_usb_Init() | |
| mir_sdr_usb_USB DLL: Revision 0.1.1 | |
| Opened device with idVendor = 0x1df7 idProduct = 0x2500 fwVersion = 0x0206 | |
| Msg: libusb_get_configuration() = 1 | |
| mir_sdr_2500 attachFn(hnd, 0x0206, 1, 0) | |
| mir_sdr_usb_SetInterface(2) | |
| mir_sdr_2500_GetFnAddr() | |
| mir_sdr_2500_Init: fnaddr = 2 detected, trying to change... | |
| mir_sdr_2500_GetFnAddr() | |
| mir_sdr_2500_Init: fnaddr = 6 | |
| mir_sdr_2500_SetRegister(0x05, 0x00000c) | |
| mir_sdr_2500_SetRegister(0x09, 0x00000e) | |
| mir_sdr_2500_SetRegister(0x00, 0x000200) | |
| mir_sdr_2500_Init: adjusting squelch trim 0x1, rx gating enable 1, tx_trim 0, reg2 = 0x4801 | |
| mir_sdr_2500_SetRegister(0x02, 0x004801) | |
| mir_sdr_2500_SetRegister(0x09, 0x28bb85) | |
| mir_sdr_2500_SetRegister(0x08, 0x00fa80) | |
| mir_sdr_2500_SetRegister(0x07, 0x000005) | |
| initHw: Register7 = 0x000005 | |
| mir_sdr_2500_SetRegister(0x09, 0x04f440) | |
| initHw: Tuner Register0 = 0x04f440 | |
| mir_sdr_2500_StreamInit(0, 393216) | |
| mir_sdr_usb_StreamInit(0, 393216) | |
| mir_sdr_2500_StartRx() | |
| mir_sdr_usb_FlushLocalBuffer() | |
| mir_sdr_SetFs: Sample Freq requested 2047999.978065 | |
| mir_sdr_2500_SetRegister(0x04, 0x0624dd) | |
| mir_sdr_2500_SetRegister(0x03, 0x01181f) | |
| mir_sdr_SetFs: Fs->FsNomHz+dFsHz=2048000.0+0.0Hz=2048000.0Hz FsToggle->1 | |
| mir_sdr_2500_SetRegister(0x09, 0x000003) | |
| mir_sdr_2500_SetRegister(0x09, 0x250202) | |
| mir_sdr_SetRf: f->222064000.000Hz (int=25 frac=20 afc=0) fSynth:3553024000.000 | |
| mir_sdr_SetRf: Rf->RfNomHz+dRfHz+LifHz+Lif1Hz=222064000.0+0.0+0.0Hz+0.0Hz=222064000.0Hz RfToggle->1 | |
| mir_sdr_2500_SetRegister(0x09, 0x032101) | |
| mir_sdr_SetGr: GR->40[16,24,0,0] gRset->0x210 DCCALmode=4 DCCALspd=1 GrToggle->1 | |
| setToggleStates: initialising sampNum=0x0002021e, gainSetting=0x210, FsToggle=0, RfToggle=1, GrToggle=1 | |
| setToggleStates: initialising Fs=2047999.978, Rf=222064000.000, Gr=40 | |
| mir_sdr_2500_StopRx() | |
| mir_sdr_2500_StreamUninit() | |
| mir_sdr_usb_StreamUninit(1) | |
| FFT visual data thread started. | |
| Audio Device #0 Apple Inc.: AirPlay | |
| Default Output? No | |
| Default Input? No | |
| Input channels: 0 | |
| Output channels: 2 | |
| Duplex channels: 0 | |
| Native formats: | |
| 32-bit float normalized between plus/minus 1.0. | |
| Supported sample rates: | |
| 44100hz | |
| Audio Device #1 Apple Inc.: Built-in Microphone | |
| Default Output? No | |
| Default Input? No | |
| Input channels: 2 | |
| Output channels: 0 | |
| Duplex channels: 0 | |
| Native formats: | |
| 32-bit float normalized between plus/minus 1.0. | |
| Supported sample rates: | |
| 8000hz | |
| 16000hz | |
| 32000hz | |
| 44100hz | |
| 48000hz | |
| 88200hz | |
| 96000hz | |
| Audio Device #2 Apple Inc.: Built-in Input | |
| Default Output? No | |
| Default Input? No | |
| Input channels: 2 | |
| Output channels: 0 | |
| Duplex channels: 0 | |
| Native formats: | |
| 32-bit float normalized between plus/minus 1.0. | |
| Supported sample rates: | |
| 8000hz | |
| 16000hz | |
| 32000hz | |
| 44100hz | |
| 48000hz | |
| 88200hz | |
| 96000hz | |
| Audio Device #3 Apple Inc.: Built-in Output | |
| Default Output? Yes | |
| Default Input? Yes | |
| Input channels: 0 | |
| Output channels: 2 | |
| Duplex channels: 0 | |
| Native formats: | |
| 32-bit float normalized between plus/minus 1.0. | |
| Supported sample rates: | |
| 44100hz | |
| 48000hz | |
| 88200hz | |
| 96000hz | |
| Audio Device #4 Burr-Brown from TI: USB Audio CODEC | |
| Default Output? No | |
| Default Input? No | |
| Input channels: 0 | |
| Output channels: 2 | |
| Duplex channels: 0 | |
| Native formats: | |
| 32-bit float normalized between plus/minus 1.0. | |
| Supported sample rates: | |
| 32000hz | |
| 44100hz | |
| 48000hz | |
| Audio Device #5 Burr-Brown from TI: USB Audio CODEC | |
| Default Output? No | |
| Default Input? No | |
| Input channels: 2 | |
| Output channels: 0 | |
| Duplex channels: 0 | |
| Native formats: | |
| 32-bit float normalized between plus/minus 1.0. | |
| Supported sample rates: | |
| 8000hz | |
| 11025hz | |
| 16000hz | |
| 22050hz | |
| 32000hz | |
| 44100hz | |
| 48000hz | |
| Audio Device #6 Jabra: Jabra UC VOICE 750a MS | |
| Default Output? No | |
| Default Input? No | |
| Input channels: 1 | |
| Output channels: 2 | |
| Duplex channels: 1 | |
| Native formats: | |
| 32-bit float normalized between plus/minus 1.0. | |
| Supported sample rates: | |
| 8000hz | |
| 16000hz | |
| 24000hz | |
| 32000hz | |
| 44100hz | |
| 48000hz | |
| Loaded font 'Bitstream Vera Sans Mono' from 'vera_sans_mono16.fnt', parsed 167 characters. | |
| Loaded font 'Bitstream Vera Sans Mono' from 'vera_sans_mono12.fnt', parsed 167 characters. | |
| Loaded font 'Bitstream Vera Sans Mono' from 'vera_sans_mono24.fnt', parsed 167 characters. | |
| mir_sdr_2500_SetRegister(0x08, 0x006280) | |
| mir_sdr_2500_Uninit() | |
| mir_sdr_2500_SetRegister(0x09, 0x063000) | |
| mir_sdr_2500_SetRegister(0x09, 0x00800e) | |
| mir_sdr_2500_SetRegister(0x03, 0x091300) | |
| mir_sdr_2500_SetRegister(0x05, 0x000004) | |
| mir_sdr_usb_Uninit() | |
| Releasing interface in mir_sdr_usb_Uninit() | |
| Closing driver handle in mir_sdr_usb_Uninit() | |
| Closed driver handle in mir_sdr_usb_Uninit() | |
| Closed eventThread in mir_sdr_usb_Uninit() | |
| Exited libusb in mir_sdr_usb_Uninit() | |
| mir_sdr_usb_Uninit() completed | |
| [DEBUG] Set sample rate | |
| [DEBUG] Changed center frequency | |
| libc++abi.dylib: terminating with uncaught exception of type std::out_of_range: map::at: key not found | |
| [1] 1521 abort /Applications/CubicSDR.app/Contents/MacOS/CubicSDR``` |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment