install/test Suricata on a virtualbox with Ubuntu 14.04 installed

suricata2install

Suricata
Nov 2, 2014:
... don't waste time installing it on osx :(
    instead, try it on ubuntu 14.04 using virtualbox, much better, and more like a real server:
sudo apt-get install build-essential automake libtool bison subversion pkg-config
sudo apt-get install libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev libpcre3 libpcre3-dev
sudo apt-get install openssl libreadline6 libreadline6-dev curl git-core zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3
sudo apt-get install libnet1 libnet1-dev
sudo apt-get install libpcap-dev libpcap0.8 libpcap0.8-dev
sudo apt-get install libcap-ng-dev
sudo apt-get install coccinelle
sudo apt-get install libcap-ng-dev
sudo apt-get install magic libmagic-dev
sudo apt-get install file
sudo apt-get install libjansson4 libjansson-dev python-simplejson
... is there anything left to install ?  :)

... download from http://suricata-ids.org/download/ click: suricata-2.0.4.tar.gz
tar zxvf suricata-2.0.4.tar.gz

cd suricata-2.0.4
./configure --prefix=/opt/suricata --sysconfdir=/opt/suricata/etc --localstatedir=/var
make -j4   <<-- 4 cores, change to your number of cores
sudo make install-full    <<-- includes config/rules
    outputs:
    You can now start suricata by running as root something like: 
    /opt/suricata/bin/suricata -c /opt/suricata/etc/suricata//suricata.yaml -i eth0
    
    If a library like libhtp.so is not found, you can run suricata with:
    'LD_LIBRARY_PATH=/opt/suricata/lib /opt/suricata/bin/suricata -c /opt/suricata/etc/suricata//suricata.yaml -i eth0'.
    
    While rules are installed now, it's highly recommended to use a rule manager for maintaining rules.
    The two most common are Oinkmaster and Pulledpork. For a guide see:
    https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Rule_Management_with_Oinkmaster

... start it up:
sudo /opt/suricata/bin/suricata -c /opt/suricata/etc/suricata/suricata.yaml --af-packet=eth0
... oops, this shows a warning about enabled network card features, and here's how to fix that:
sudo ethtool -k eth0 ... lists settings
sudo ethtool -K eth0 tx off rx off sg off gso off gro off

... now open 3 terminal windows, or 2 since you have 1 open already ;)
1. start suricata:
    sudo /opt/suricata/bin/suricata -c /opt/suricata/etc/suricata/suricata.yaml --af-packet=eth0
2. cd /var/log/suricata
     tail -f fast.log http.log
3. wget www.testmyids.com
... in terminal window 2 you should see:
==> http.log <===
11/03/2014-04:36:12.075516 www.testmyids.com [**] / [**] Wget/1.15 (linux-gnu) [**] 192.168.0.4:33803 -> 82.165.177.154:80

==> fast.log <===
11/03/2014-04:36:12.206152  [**] [1:2100498:7] GPL ATTACK_RESPONSE id check returned root [**] [Classification: Potentially Bad Traffic] [Priority: 2] {TCP} 82.165.177.154:80 -> 192.168.0.4:33803

One Step Beyond:
cd /opt/suricata/etc/suricata/rules
sudo nano local.rules   <<-- probably a new file
alert icmp any any -> any any (msg:"PING detected"; sid:2; rev:1;)
... ctrl+o, ctrl+x ... i.e. save it
sudo nano /opt/suricata/etc/suricata/suricata.yaml
... ctrl+w, type rule-files: to find where to add new rule files, then add:
 - local.rules  (indent like the other rule files listed)
... ctrl+o, ctrl+x ... i.e. save it
... stop suricata, somehow, if you still testing in a terminal window then do a ctrl+c
... start it up again to use the new rules
... ping the suricata server from another server:
ping 192.168.x.x   <<-- suricata server IP
... in the "tail -f fast.log http.log" i.e. terminal window 2 you should see lines like this:
==> fast.log <==
11/03/2014-04:14:38.192906  [**] [1:2:1] PING detected [**] [Classification: (null)] [Priority: 3] {ICMP} 192.168.0.2:8 -> 192.168.0.4:0

... can't run suricata in a terminal window all the time, so let's use an Upstart script:
sudo nano /etc/init/suricata.conf
... add this:
# suricata
description "Intruder Detection System Daemon"
start on runlevel [2345]
stop on runlevel [!2345]
expect fork
exec /opt/suricata/bin/suricata -D --pidfile /var/run/suricata.pid -c /opt/suricata/etc/suricata/suricata.yaml --af-packet=eth0
... ctrl+o, ctrl+x ... i.e. save it
... start it up again, be sure that terminal window 1 has been stopped:
sudo service suricata start
... retest like above

enjoy!

Warning! spatch not found, you will not be
able to run code checking with coccinelle
get it from http://coccinelle.lip6.fr
or install from your distribution
checking for Mpipe... no
checking pcre.h usability... no
checking pcre.h presence... no
checking for pcre.h... no
configure: error: pcre.h not found ...
krishna@ubuntu:/Downloads/suricata-2.0.4$ make -j4
make: *** No targets specified and no makefile found. Stop.
krishna@ubuntu:/Downloads/suricata-2.0.4$ sudo make install-full
make: *** No rule to make target `install-full'. Stop.
krishna@ubuntu:~/Downloads/suricata-2.0.4$

error

Thank you so much :)