Created
October 18, 2021 17:32
-
-
Save cmidgley/d6bb5e894def0794fa3e1f154e794aaa to your computer and use it in GitHub Desktop.
SuperSlicer Voron 2.4 PLA
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [print:Voron 2.4-AB-0.2mm FAST] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = rectilinear | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 100% | |
| bridge_overlap = 100% | |
| bridge_speed = 200 | |
| bridge_speed_internal = 200 | |
| bridged_infill_margin = 200% | |
| brim_ears = 0 | |
| brim_ears_detection_length = 1 | |
| brim_ears_max_angle = 125 | |
| brim_ears_pattern = concentric | |
| brim_inside_holes = 0 | |
| brim_offset = 0 | |
| brim_width = 0 | |
| brim_width_interior = 0 | |
| clip_multipart_objects = 0 | |
| compatible_printers = "Voron 2.4-AB-0.4mm" | |
| compatible_printers_condition = | |
| complete_objects = 0 | |
| complete_objects_one_skirt = 0 | |
| complete_objects_sort = object | |
| curve_smoothing_angle_concave = 0 | |
| curve_smoothing_angle_convex = 0 | |
| curve_smoothing_cutoff_dist = 2 | |
| curve_smoothing_precision = 0 | |
| default_acceleration = 5000 | |
| dont_support_bridges = 1 | |
| draft_shield = 0 | |
| duplicate_distance = 6 | |
| enforce_full_fill_volume = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| exact_last_layer_height = 0 | |
| external_infill_margin = 150% | |
| external_perimeter_cut_corners = 0% | |
| external_perimeter_extrusion_spacing = | |
| external_perimeter_extrusion_width = 0.38 | |
| external_perimeter_overlap = 100% | |
| external_perimeter_speed = 80 | |
| external_perimeters_first = 0 | |
| external_perimeters_hole = 1 | |
| external_perimeters_nothole = 1 | |
| external_perimeters_vase = 0 | |
| extra_perimeters = 1 | |
| extra_perimeters_odd_layers = 0 | |
| extra_perimeters_overhangs = 0 | |
| extruder_clearance_height = 30 | |
| extruder_clearance_radius = 68 | |
| extrusion_spacing = | |
| extrusion_width = 0.4 | |
| fill_angle = 45 | |
| fill_angle_increment = 0 | |
| fill_density = 40% | |
| fill_pattern = cubic | |
| fill_smooth_distribution = 10% | |
| fill_smooth_width = 50% | |
| fill_top_flow_ratio = 110% | |
| first_layer_acceleration = 500 | |
| first_layer_extrusion_spacing = | |
| first_layer_extrusion_width = 0.4 | |
| first_layer_flow_ratio = 100% | |
| first_layer_height = 0.2 | |
| first_layer_infill_speed = 45 | |
| first_layer_size_compensation = 0 | |
| first_layer_speed = 35 | |
| gap_fill = 1 | |
| gap_fill_min_area = 100% | |
| gap_fill_overlap = 100% | |
| gap_fill_speed = 70 | |
| gcode_comments = 0 | |
| gcode_label_objects = 0 | |
| hole_size_compensation = 0 | |
| hole_size_threshold = 100 | |
| hole_to_polyhole = 0 | |
| hole_to_polyhole_threshold = 0.01 | |
| infill_acceleration = 7000 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection = connected | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_dense = 0 | |
| infill_dense_algo = autoenlarged | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_spacing = | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 350 | |
| inherits = | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 15 | |
| ironing_type = top | |
| layer_height = 0.2 | |
| max_print_speed = 450 | |
| max_volumetric_speed = 20 | |
| milling_after_z = 200% | |
| milling_extra_size = 150% | |
| milling_post_process = 0 | |
| milling_speed = 30 | |
| min_skirt_length = 20 | |
| min_width_top_surface = 200% | |
| model_precision = 0.0001 | |
| no_perimeter_unsupported_algo = none | |
| notes = | |
| only_one_perimeter_top = 1 | |
| only_one_perimeter_top_other_algo = 0 | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = Voron [input_filename_base].gcode | |
| over_bridge_flow_ratio = 110% | |
| overhangs_reverse = 1 | |
| overhangs_reverse_threshold = 250% | |
| overhangs_speed = 50 | |
| overhangs_width = 75% | |
| overhangs_width_speed = 50% | |
| perimeter_acceleration = 1000 | |
| perimeter_bonding = 0% | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_spacing = | |
| perimeter_extrusion_width = 0.38 | |
| perimeter_loop = 0 | |
| perimeter_loop_seam = rear | |
| perimeter_overlap = 100% | |
| perimeter_round_corners = 0 | |
| perimeter_speed = 300 | |
| perimeters = 3 | |
| post_process = | |
| print_extrusion_multiplier = 100% | |
| print_retract_length = -1 | |
| print_retract_lift = -1 | |
| print_settings_id = Voron 2.4-AB-0.2mm | |
| print_temperature = 0 | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_angle_cost = 100% | |
| seam_position = aligned | |
| seam_travel_cost = 100% | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 3 | |
| skirt_extrusion_width = 0 | |
| skirt_height = 1 | |
| skirts = 0 | |
| slice_closing_radius = 0.049 | |
| small_perimeter_max_length = 20 | |
| small_perimeter_min_length = 6 | |
| small_perimeter_speed = 40 | |
| solid_fill_pattern = rectilineargapfill | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_spacing = | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 300 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance_bottom = 0.2 | |
| support_material_contact_distance_top = 0.2 | |
| support_material_contact_distance_type = plane | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_solid_first_layer = 0 | |
| support_material_spacing = 2.5 | |
| support_material_speed = 90 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 45 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 0.5 | |
| thin_perimeters = 1 | |
| thin_perimeters_all = 0 | |
| thin_walls = 0 | |
| thin_walls_merge = 1 | |
| thin_walls_min_width = 33% | |
| thin_walls_overlap = 50% | |
| thin_walls_speed = 50 | |
| threads = 16 | |
| top_fill_pattern = rectilinear | |
| top_infill_extrusion_spacing = | |
| top_infill_extrusion_width = 0.44 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 3 | |
| top_solid_min_thickness = 0 | |
| travel_speed = 500 | |
| travel_speed_z = 0 | |
| wipe_tower = 0 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim = 150% | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_inner_size_compensation = 0 | |
| xy_size_compensation = 0 | |
| [print:Voron 2.4-AB-0.2mm STANDARD] | |
| allow_empty_layers = 0 | |
| avoid_crossing_not_first_layer = 1 | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = rectilinear | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 100% | |
| bridge_overlap = 100% | |
| bridge_speed = 30 | |
| bridge_speed_internal = 70 | |
| bridged_infill_margin = 200% | |
| brim_ears = 0 | |
| brim_ears_detection_length = 1 | |
| brim_ears_max_angle = 125 | |
| brim_ears_pattern = concentric | |
| brim_inside_holes = 0 | |
| brim_offset = 0 | |
| brim_width = 0 | |
| brim_width_interior = 0 | |
| clip_multipart_objects = 0 | |
| compatible_printers = "Voron 2.4-AB-0.4mm" | |
| compatible_printers_condition = | |
| complete_objects = 0 | |
| complete_objects_one_skirt = 0 | |
| complete_objects_sort = object | |
| curve_smoothing_angle_concave = 0 | |
| curve_smoothing_angle_convex = 0 | |
| curve_smoothing_cutoff_dist = 2 | |
| curve_smoothing_precision = 0 | |
| default_acceleration = 3000 | |
| dont_support_bridges = 1 | |
| draft_shield = 0 | |
| duplicate_distance = 6 | |
| enforce_full_fill_volume = 1 | |
| ensure_vertical_shell_thickness = 1 | |
| exact_last_layer_height = 0 | |
| external_infill_margin = 150% | |
| external_perimeter_cut_corners = 0% | |
| external_perimeter_extrusion_spacing = | |
| external_perimeter_extrusion_width = 0.38 | |
| external_perimeter_overlap = 100% | |
| external_perimeter_speed = 45 | |
| external_perimeters_first = 0 | |
| external_perimeters_hole = 1 | |
| external_perimeters_nothole = 1 | |
| external_perimeters_vase = 0 | |
| extra_perimeters = 1 | |
| extra_perimeters_odd_layers = 0 | |
| extra_perimeters_overhangs = 0 | |
| extruder_clearance_height = 30 | |
| extruder_clearance_radius = 68 | |
| extrusion_spacing = | |
| extrusion_width = 0.4 | |
| fill_angle = 45 | |
| fill_angle_increment = 0 | |
| fill_density = 40% | |
| fill_pattern = cubic | |
| fill_smooth_distribution = 10% | |
| fill_smooth_width = 30% | |
| fill_top_flow_ratio = 110% | |
| first_layer_acceleration = 500 | |
| first_layer_extrusion_spacing = | |
| first_layer_extrusion_width = 0.4 | |
| first_layer_flow_ratio = 100% | |
| first_layer_height = 0.2 | |
| first_layer_infill_speed = 45 | |
| first_layer_size_compensation = 0 | |
| first_layer_speed = 35 | |
| gap_fill = 1 | |
| gap_fill_min_area = 100% | |
| gap_fill_overlap = 100% | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| gcode_label_objects = 0 | |
| hole_size_compensation = 0 | |
| hole_size_threshold = 100 | |
| hole_to_polyhole = 0 | |
| hole_to_polyhole_threshold = 0.01 | |
| infill_acceleration = 2000 | |
| infill_anchor = 600% | |
| infill_anchor_max = 0 | |
| infill_connection = connected | |
| infill_connection_bottom = connected | |
| infill_connection_solid = connected | |
| infill_connection_top = connected | |
| infill_dense = 0 | |
| infill_dense_algo = autoenlarged | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_spacing = | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 80 | |
| inherits = | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_angle = -1 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 15 | |
| ironing_type = top | |
| layer_height = 0.2 | |
| max_print_speed = 450 | |
| max_volumetric_speed = 20 | |
| milling_after_z = 200% | |
| milling_extra_size = 150% | |
| milling_post_process = 0 | |
| milling_speed = 30 | |
| min_skirt_length = 20 | |
| min_width_top_surface = 200% | |
| model_precision = 0.0001 | |
| no_perimeter_unsupported_algo = none | |
| notes = | |
| only_one_perimeter_top = 1 | |
| only_one_perimeter_top_other_algo = 0 | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = Voron [input_filename_base].gcode | |
| over_bridge_flow_ratio = 110% | |
| overhangs_reverse = 1 | |
| overhangs_reverse_threshold = 250% | |
| overhangs_speed = 100% | |
| overhangs_width = 75% | |
| overhangs_width_speed = 50% | |
| perimeter_acceleration = 1000 | |
| perimeter_bonding = 0% | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_spacing = | |
| perimeter_extrusion_width = 0.38 | |
| perimeter_loop = 0 | |
| perimeter_loop_seam = rear | |
| perimeter_overlap = 100% | |
| perimeter_round_corners = 0 | |
| perimeter_speed = 60 | |
| perimeters = 4 | |
| post_process = | |
| print_extrusion_multiplier = 100% | |
| print_retract_length = -1 | |
| print_retract_lift = -1 | |
| print_settings_id = Voron 2.4-AB-0.2mm | |
| print_temperature = 0 | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_angle_cost = 100% | |
| seam_position = aligned | |
| seam_travel_cost = 100% | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 3 | |
| skirt_extrusion_width = 0 | |
| skirt_height = 1 | |
| skirts = 0 | |
| slice_closing_radius = 0.049 | |
| small_perimeter_max_length = 20 | |
| small_perimeter_min_length = 6 | |
| small_perimeter_speed = 40 | |
| solid_fill_pattern = rectilineargapfill | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_spacing = | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 80 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance_bottom = 0.2 | |
| support_material_contact_distance_top = 0.2 | |
| support_material_contact_distance_type = plane | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_solid_first_layer = 0 | |
| support_material_spacing = 2.5 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 45 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 0.5 | |
| thin_perimeters = 1 | |
| thin_perimeters_all = 0 | |
| thin_walls = 0 | |
| thin_walls_merge = 1 | |
| thin_walls_min_width = 33% | |
| thin_walls_overlap = 50% | |
| thin_walls_speed = 35 | |
| threads = 16 | |
| top_fill_pattern = smooth | |
| top_infill_extrusion_spacing = | |
| top_infill_extrusion_width = 0.44 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 4 | |
| top_solid_min_thickness = 0 | |
| travel_speed = 500 | |
| travel_speed_z = 0 | |
| wipe_tower = 0 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim = 150% | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_inner_size_compensation = 0 | |
| xy_size_compensation = 0 | |
| [filament:Hatchbox-PLA-1.75mm] | |
| bed_temperature = 55 | |
| bridge_fan_speed = 100 | |
| chamber_temperature = 15 | |
| compatible_printers = "Voron 2.4-AB-0.4mm" | |
| compatible_printers_condition = | |
| compatible_prints = | |
| compatible_prints_condition = | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "EXHAUST_FAN SPEED=100\nPRINT_BED_COOL TEMP=50" | |
| external_perimeter_fan_speed = -1 | |
| extrusion_multiplier = 0.93 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cooling_zone_pause = 0 | |
| filament_cost = 20 | |
| filament_density = 1.24 | |
| filament_deretract_speed = nil | |
| filament_diameter = 1.75 | |
| filament_dip_extraction_speed = 70 | |
| filament_dip_insertion_speed = 33 | |
| filament_enable_toolchange_part_fan = 0 | |
| filament_enable_toolchange_temp = 0 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_speed = 0 | |
| filament_max_volumetric_speed = 20 | |
| filament_max_wipe_tower_speed = 0 | |
| filament_melt_zone_pause = 0 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_retract_before_travel = nil | |
| filament_retract_before_wipe = nil | |
| filament_retract_layer_change = nil | |
| filament_retract_length = nil | |
| filament_retract_lift = nil | |
| filament_retract_lift_above = nil | |
| filament_retract_lift_below = nil | |
| filament_retract_restart_extra = nil | |
| filament_retract_speed = nil | |
| filament_settings_id = "" | |
| filament_shrink = 100% | |
| filament_skinnydip_distance = 31 | |
| filament_soluble = 0 | |
| filament_spool_weight = 0 | |
| filament_toolchange_delay = 0 | |
| filament_toolchange_part_fan_speed = 50 | |
| filament_toolchange_temp = 200 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| filament_use_fast_skinnydip = 0 | |
| filament_use_skinnydip = 0 | |
| filament_vendor = (Unknown) | |
| filament_wipe = nil | |
| filament_wipe_advanced_pigment = 0.5 | |
| filament_wipe_extra_perimeter = nil | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 200 | |
| full_fan_speed_layer = 0 | |
| inherits = | |
| max_fan_speed = 100 | |
| max_speed_reduction = 70% | |
| min_fan_speed = 100 | |
| min_print_speed = 25 | |
| slowdown_below_layer_time = 15 | |
| start_filament_gcode = "EXHAUST_FAN SPEED=100" | |
| temperature = 195 | |
| top_fan_speed = 100 | |
| [printer:Voron 2.4-AB-0.4mm] | |
| bed_custom_model = C:\\Users\\chris\\Documents\\Personal\\3DPrinter\\SuperSlicer\\printer\\voron2_bed-350.stl | |
| bed_custom_texture = C:\\Users\\chris\\Documents\\Personal\\3DPrinter\\SuperSlicer\\printer\\bedtexture-v2-350.png | |
| bed_shape = 0x0,340x0,340x350,0x350 | |
| before_layer_gcode = | |
| between_objects_gcode = | |
| color_change_gcode = M600 | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = | |
| default_print_profile = | |
| deretract_speed = 30 | |
| end_gcode = PRINT_END\n | |
| extra_loading_move = -2 | |
| extruder_colour = "" | |
| extruder_fan_offset = 0% | |
| extruder_offset = 0x0 | |
| extruder_temperature_offset = 0 | |
| fan_kickstart = 0 | |
| fan_percentage = 0 | |
| fan_speedup_overhangs = 1 | |
| fan_speedup_time = 0 | |
| feature_gcode = | |
| gcode_flavor = klipper | |
| gcode_precision_e = 5 | |
| gcode_precision_xyz = 3 | |
| high_current_on_filament_swap = 0 | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = PRINT_LAYER_CHANGE layer=[layer_num] | |
| machine_limits_usage = time_estimate_only | |
| machine_max_acceleration_e = 10000,5000 | |
| machine_max_acceleration_extruding = 10000,1250 | |
| machine_max_acceleration_retracting = 10000,1250 | |
| machine_max_acceleration_travel = 6000,1250 | |
| machine_max_acceleration_x = 10000,1000 | |
| machine_max_acceleration_y = 10000,1000 | |
| machine_max_acceleration_z = 500,200 | |
| machine_max_feedrate_e = 120,120 | |
| machine_max_feedrate_x = 500,200 | |
| machine_max_feedrate_y = 500,200 | |
| machine_max_feedrate_z = 12,12 | |
| machine_max_jerk_e = 2.5,2.5 | |
| machine_max_jerk_x = 10,10 | |
| machine_max_jerk_y = 10,10 | |
| machine_max_jerk_z = 0.2,0.4 | |
| machine_min_extruding_rate = 0,0 | |
| machine_min_travel_rate = 0,0 | |
| max_layer_height = 0.3 | |
| max_print_height = 300 | |
| milling_diameter = | |
| milling_toolchange_end_gcode = | |
| milling_toolchange_start_gcode = | |
| milling_z_lift = | |
| min_layer_height = 0.07 | |
| min_length = 0.035 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| pause_print_gcode = M601 | |
| print_host = | |
| printer_model = | |
| printer_notes = | |
| printer_settings_id = 250mm3 0.4mm ABS AB | |
| printer_technology = FFF | |
| printer_variant = | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| printhost_port = | |
| remaining_times = 0 | |
| retract_before_travel = 3 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 0 | |
| retract_length = 0.3 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0.4 | |
| retract_lift_above = 0 | |
| retract_lift_below = 0 | |
| retract_lift_first_layer = 0 | |
| retract_lift_top = "Only on top" | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 50 | |
| silent_mode = 1 | |
| single_extruder_multi_material = 0 | |
| start_gcode = PRINT_START EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature] TIMELAPSE=0 TIMELAPSE_START_X={bounding_box[0] - 10} TIMELAPSE_END_X={bounding_box[2] + 10} TIMELAPSE_Y={bounding_box[3] +10} TIMELAPSE_LAYERS=[total_layer_count]\n | |
| start_gcode_manual = 0 | |
| template_custom_gcode = | |
| thumbnails = 48x48,300x300 | |
| thumbnails_color = #018aff | |
| thumbnails_custom_color = 0 | |
| thumbnails_with_bed = 0 | |
| time_estimation_compensation = 100% | |
| tool_name = "" | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 0 | |
| wipe = 0 | |
| wipe_advanced = 0 | |
| wipe_advanced_algo = linear | |
| wipe_advanced_multiplier = 60 | |
| wipe_advanced_nozzle_melted_volume = 120 | |
| wipe_extra_perimeter = 0 | |
| z_offset = 0 | |
| z_step = 0.005 | |
| [presets] | |
| print = Voron 2.4-AB-0.2mm FAST | |
| sla_print = | |
| sla_material = | |
| printer = Voron 2.4-AB-0.4mm | |
| filament = Hatchbox-PLA-1.75mm |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment