Last active
December 8, 2023 21:31
-
-
Save cnorick/1ad3d61e7e517fb05e1972908b6b607e to your computer and use it in GitHub Desktop.
ESPHome -- Scroll LCD Display Lines
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| substitutions: | |
| lcd_width: '16' | |
| lcd_height: '2' | |
| scroll_speed: 1s | |
| line_1: 'Long line that we want to scroll' | |
| line_2: 'Another long line that does not fit on the screen' | |
| display: | |
| - platform: lcd_gpio | |
| dimensions: ${lcd_width}x${lcd_height} | |
| data_pins: | |
| - D0 | |
| - D1 | |
| - D2 | |
| - D3 | |
| enable_pin: D6 | |
| rs_pin: D5 | |
| id: lcd | |
| update_interval: $scroll_speed | |
| lambda: |- | |
| static int p1 = 0; | |
| static int p2 = 0; | |
| // These lines could instead come from something like a text sensor. | |
| char* line1 = "$line_1"; | |
| int length1 = strlen(line1); | |
| if (length1 > $lcd_width) length1 = $lcd_width; | |
| const char* line2 = "$line_2"; | |
| int length2 = strlen(line2); | |
| if (length2 > $lcd_width) length2 = $lcd_width; | |
| int spacesLength = length1 >= $lcd_width ? 0 : $lcd_width - length1 + 1; | |
| char spaces[spacesLength]; | |
| for (int i = 0; i < spacesLength - 1; i++) spaces[i] = ' '; | |
| spaces[spacesLength - 1] = '\0'; | |
| it.printf("%.*s%s%.*s", length1, line1 + p1, spaces, length2, line2 + p2); | |
| p1++; | |
| if(p1 > (int)strlen(line1) - $lcd_width) { | |
| p1 = 0; | |
| } | |
| p2++; | |
| if(p2 > (int)strlen(line2) - $lcd_width) { | |
| p2 = 0; | |
| } | |
Thanks for the code @cnorick
I've been hacking at this for a while to get it to show some data from text sensors but am hitting issues with converting to string/int/char etc.
Could you post your code for using a text sensor? Keen to see where I am going wrong.
Hey @steveisaguy, here is my whole configuration where I use the scrolling LCD. I haven't used this device in a while, so there's a chance it will no longer work after some of the new ESPHome updates. Good luck with it!
substitutions:
lcd_width: '16'
lcd_height: '2'
scroll_speed: 1s
esphome:
name: meeting-status-board
platform: ESP8266
board: nodemcuv2
# Enable logging
logger:
level: DEBUG
# Enable Home Assistant API
api:
ota:
password: !secret ota_password
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Meeting-Status-Board"
password: !secret ap_password
captive_portal:
text_sensor:
- platform: homeassistant
id: meeting_title
entity_id: calendar.work
attribute: message
name: "Meeting Title"
disabled_by_default: true
- platform: homeassistant
id: meeting_start
entity_id: calendar.work
attribute: start_time
name: "Meeting Start Time"
disabled_by_default: true
- platform: homeassistant
id: meeting_end
entity_id: calendar.work
attribute: end_time
name: "Meeting End Time"
disabled_by_default: true
- platform: template
name: "Current Light"
lambda: |-
if (id(in_meeting).state) {
return {"red"};
}
else if (id(meeting_started).state) {
return {"yellow"};
}
else {
return {"green"};
}
update_interval: 5s
id: current_light
disabled_by_default: true
on_value:
then:
- switch.turn_off: green_light
- switch.turn_off: yellow_light
- switch.turn_off: red_light
- if:
condition:
binary_sensor.is_on: in_meeting
then:
- switch.turn_on: red_light
else:
- if:
condition:
binary_sensor.is_on: meeting_started
then:
- switch.turn_on: yellow_light
else:
- switch.turn_on: green_light
binary_sensor:
- platform: homeassistant
id: meeting_started
entity_id: calendar.work
name: "Meeting Started"
disabled_by_default: true
- platform: homeassistant
id: in_meeting
entity_id: binary_sensor.in_meeting
name: "In Meeting"
disabled_by_default: true
switch:
- platform: gpio
pin: D7
name: "Green Light"
internal: true
id: green_light
- platform: gpio
pin: D8
name: "Yellow Light"
internal: true
id: yellow_light
- platform: gpio
pin: 9
name: "Red Light"
internal: true
id: red_light
display:
- platform: lcd_gpio
dimensions: ${lcd_width}x${lcd_height}
data_pins:
- D0
- D1
- D2
- D3
enable_pin: D6
rs_pin: D5
id: lcd
update_interval: $scroll_speed
lambda: |-
static int p1 = 0;
static int p2 = 0;
char line1[$lcd_width];
char startString[$lcd_width/2];
char endString[$lcd_width/2];
struct tm start;
memset(&start, 0, sizeof(tm));
struct tm end;
memset(&end, 0, sizeof(tm));
strptime(id(meeting_start).state.c_str(), "%Y-%m-%d %H:%M:%S", &start);
strftime(startString, sizeof(startString), "%I:%M", &start);
strptime(id(meeting_end).state.c_str(), "%Y-%m-%d %H:%M:%S", &end);
strftime(endString, sizeof(endString), "%I:%M", &end);
sprintf(line1, "%s - %s", startString, endString);
int length1 = strlen(line1);
const char* line2 = id(meeting_title).state.c_str();
int length2 = strlen(line2);
if (length2 > $lcd_width) length2 = $lcd_width;
int spacesLength = length1 >= $lcd_width ? 0 : $lcd_width - length1 + 1;
char spaces[spacesLength];
for (int i = 0; i < spacesLength - 1; i++) spaces[i] = ' ';
spaces[spacesLength - 1] = '\0';
it.printf("%.*s%s%.*s", length1, line1 + p1, spaces, length2, line2 + p2);
p1++;
if(p1 > (int)strlen(line1) - $lcd_width) {
p1 = 0;
}
p2++;
if(p2 > (int)strlen(line2) - $lcd_width) {
p2 = 0;
}
Hey @steveisaguy, here is my whole configuration where I use the scrolling LCD. I haven't used this device in a while, so there's a chance it will no longer work after some of the new ESPHome updates. Good luck with it!
substitutions: lcd_width: '16' lcd_height: '2' scroll_speed: 1s esphome: name: meeting-status-board platform: ESP8266 board: nodemcuv2 # Enable logging logger: level: DEBUG # Enable Home Assistant API api: ota: password: !secret ota_password wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Meeting-Status-Board" password: !secret ap_password captive_portal: text_sensor: - platform: homeassistant id: meeting_title entity_id: calendar.work attribute: message name: "Meeting Title" disabled_by_default: true - platform: homeassistant id: meeting_start entity_id: calendar.work attribute: start_time name: "Meeting Start Time" disabled_by_default: true - platform: homeassistant id: meeting_end entity_id: calendar.work attribute: end_time name: "Meeting End Time" disabled_by_default: true - platform: template name: "Current Light" lambda: |- if (id(in_meeting).state) { return {"red"}; } else if (id(meeting_started).state) { return {"yellow"}; } else { return {"green"}; } update_interval: 5s id: current_light disabled_by_default: true on_value: then: - switch.turn_off: green_light - switch.turn_off: yellow_light - switch.turn_off: red_light - if: condition: binary_sensor.is_on: in_meeting then: - switch.turn_on: red_light else: - if: condition: binary_sensor.is_on: meeting_started then: - switch.turn_on: yellow_light else: - switch.turn_on: green_light binary_sensor: - platform: homeassistant id: meeting_started entity_id: calendar.work name: "Meeting Started" disabled_by_default: true - platform: homeassistant id: in_meeting entity_id: binary_sensor.in_meeting name: "In Meeting" disabled_by_default: true switch: - platform: gpio pin: D7 name: "Green Light" internal: true id: green_light - platform: gpio pin: D8 name: "Yellow Light" internal: true id: yellow_light - platform: gpio pin: 9 name: "Red Light" internal: true id: red_light display: - platform: lcd_gpio dimensions: ${lcd_width}x${lcd_height} data_pins: - D0 - D1 - D2 - D3 enable_pin: D6 rs_pin: D5 id: lcd update_interval: $scroll_speed lambda: |- static int p1 = 0; static int p2 = 0; char line1[$lcd_width]; char startString[$lcd_width/2]; char endString[$lcd_width/2]; struct tm start; memset(&start, 0, sizeof(tm)); struct tm end; memset(&end, 0, sizeof(tm)); strptime(id(meeting_start).state.c_str(), "%Y-%m-%d %H:%M:%S", &start); strftime(startString, sizeof(startString), "%I:%M", &start); strptime(id(meeting_end).state.c_str(), "%Y-%m-%d %H:%M:%S", &end); strftime(endString, sizeof(endString), "%I:%M", &end); sprintf(line1, "%s - %s", startString, endString); int length1 = strlen(line1); const char* line2 = id(meeting_title).state.c_str(); int length2 = strlen(line2); if (length2 > $lcd_width) length2 = $lcd_width; int spacesLength = length1 >= $lcd_width ? 0 : $lcd_width - length1 + 1; char spaces[spacesLength]; for (int i = 0; i < spacesLength - 1; i++) spaces[i] = ' '; spaces[spacesLength - 1] = '\0'; it.printf("%.*s%s%.*s", length1, line1 + p1, spaces, length2, line2 + p2); p1++; if(p1 > (int)strlen(line1) - $lcd_width) { p1 = 0; } p2++; if(p2 > (int)strlen(line2) - $lcd_width) { p2 = 0; }
This looks like a cool project, do you have a photo on how the project looks. Seems you used it for a meeting room display
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
@clutch70 Thanks for the heads-up. I get my values from text sensors, so I guess that's why I didn't see it break. I updated the gist with your suggestion.