vmx_perf_tweaks.md

VMware VMX Notes, Performance Tweaks, Interactivity Improvements

experimented on VMware Workstation 15.5.2 build-15785246, other verisons may not work, no guaranteed.

---

global config for all VMs

C:\ProgramData\VMware\VMware Workstation\config.ini

resume/suspend VM asap

if you have mere host RAM amount, do not use prefvmx.minVmMemPct=100

# add to global config to apply to all VMs
prefvmx.minVmMemPct = "100"
mainMem.useNamedFile = "FALSE"
mainMem.partialLazySave = "FALSE"
mainMem.partialLazyRestore = "FALSE"

---

spoof guest OS that it's inside real machine

these tweaks will break VM tools ability to communicate with host, but it can actually fix weird random freezes since Workstation 12+, confirmed.

monitor_control.virtual_rdtsc = "false"
monitor_control.restrict_backdoor = "true"
isolation.tools.getPtrLocation.disable = "true"
isolation.tools.setPtrLocation.disable = "true"
isolation.tools.setVersion.disable = "true"
isolation.tools.getVersion.disable = "true"
monitor_control.disable_directexec = "true"

update:

random freezes:
if a picture or video is in Windows clip-paste buffer, then vmware is likely to freeze.
somebody reported this in vmware community already, but it looks like no fix right now (vmware 16).
just closed vmware window forcely and Ctrl+C some plain texts, then open vmware again. this will fix that freeze.
configs above accidentally fix this freeze by disabling vmware tool (clip-paste sharing) in guest OS.

spoof guest OS - more

monitor_control.disable_directexec = "true"
monitor_control.disable_chksimd = "true"
monitor_control.disable_ntreloc = "true"
monitor_control.disable_selfmod = "true"
monitor_control.disable_reloc = "true"
monitor_control.disable_btinout = "true"
monitor_control.disable_btmemspace = "true"
monitor_control.disable_btpriv = "true"
monitor_control.disable_btseg = "true"

spoof macOS guest

board-id.reflectHost = "FALSE"
board-id = "Mac-BE088AF8C5EB4FA2"
hw.model.reflectHost = "FALSE"
hw.model = "iMac18,3"
serialNumber.reflectHost = "FALSE"
serialNumber = "C02TC4YKJ1GJ"
smbios.reflectHost = "FALSE"
efi.nvram.var.ROM.reflectHost = "FALSE"
efi.nvram.var.MLB.reflectHost = "FALSE"
efi.nvram.var.ROM = "3c0754a2f9be"

---

improve interactivity (greatly)

confirmed on hosts with GTX1070 and RX580, win7 and ubuntu 18.04 guests.

interactive response latency is reduced greatly, no more choppy guest screen.

these tweaks probably add some overheads to host machine.

use with caution if host machine has poor performance (not tested yet).

mks.lowCompositingFPS="60"
mks.maxCompositingFPS="1000"
mks.skipHookTimeoutCheck="TRUE"
mks.updateCoalescePeriodUS="0"
svga.readbackRegionComplexityLimit="512"
mks.requireHardwareRenderer="TRUE"

• mks.lowCompositingFPS="60" : default: 10, lower limit?
• mks.maxCompositingFPS="1000" : default: 100
• mks.skipHookTimeoutCheck="TRUE" : default: FALSE
• mks.updateCoalescePeriodUS="0" : default: 16666" (16.666ms, 60Hz), 0 : latency reduces greatly
• svga.threadPollUS="1000" : default: 10000, 1000 to reduce latency, may be laggy due to overhead
• mks.vdpMinFrameDelayMS="0" : default: 28
• svga.noThreadSleep="TRUE" : default: FALSE, TRUE can hog one logical host CPU 100%, use with caution
• svga.readbackRegionComplexityLimit="512" : default: "64", 512 improves FPS of program inside VM

other tweaks that may affect interactivity

• mks.vsync="1": default: 1, 0 feels choppy, because vsync is off
• mks.allowAcceleratedRenderers="TRUE": default: "default", may allow to switch backend hw-acc renderer
• mks.win32.timerResolution="500": default: 0
• mks.dx11.enableModernPresentation="TRUE": default: FALSE, TRUE feels laggy

placebo thing

this tweak can be found while googling improve vmware interactive things, but it is deprecated in modern Workstation

# default: 4, 100/4=25hz, maximum: 1
svga.maxChangeTick = "1"

tweaks that did not confirmed

svga.maxFullscreenRefreshTick= # default: "-1" ???
svga.threadPollPendingFencesUS= # default: "100"
svga.maxFenceAgeUS= # default: "100000"
svga.traceFBCoaleseUS= # default: "10000"
mks.dx11.waitForQueryYieldMS= #default: "1" 
mks.forceDiscreteGPU= #default: "FALSE"

I tried all combinations.. for me it looks like a placebo effect. What I observed however is that vsync actually activates when going fullscreen. I also changed setting to have high priority when mouse is grabbed inside vm (might help). I tried recording a video with my tearing in windowed mode, but the recording itself looks smooth :)

btw, what is your guest os? win10 guest os is laggy.

yes win 10. my intention is to eliminate tearing (enable vsync) and increase performance for games

It's a known problem that enable 3d acceleration makes window tearing on moving(both on windows and linux.). Too bad Vmware does not give a shit on this.
I'm using pro 16.2.1 and tried force vsync for mksSandbox.exe and vmware-vmx.exe, no luck.

also "mks.vsync" is useless on 16.2.1. I decompiled vmware-vmx with ghidra,there's no such string being used.

UPDATE: vmware 16 automatically enables vsync when running in full screen mode.

is there any way to have it enabled while not in full screen? and tbh... even if i see visible improvement in full screen it's still not silky smooth