(Docker)[https://www.docker.com] a software container platform. You may have heard of it.
(Qubes-OS)[https://www.qubes-os.org] "A Reasonably Secure Operating System"
It takes a little work to get Docker running on qubes because you have to modify a templatevm. But, once you do it, you have the ease of compartmentalization qubes is famous for.
As of this writing the versions im using are,
- Qubes-OS 4.0
- Debian 9 (Fedora is fine too)
- Docker 18.09
Make clone of the template vm of your choice. I named mine dockerhost. Dont do this for your templatevm as there are some intrusive changes, and docker has security implications.
These instructions are adapted from https://docs.docker.com/engine/installation/linux/docker-ce/debian/
sudo apt-get install \
apt-transport-https \
ca-certificates \
curl \
gnupg2 \
software-properties-common
before doing the next step, in the qubes manager, go to settings on the templatevm. under firewall rules, check on allow full access for 5 min.
curl -fsSL https://download.docker.com/linux/$(. /etc/os-release; echo "$ID")/gpg | sudo apt-key add -
sudo apt-key fingerprint 0EBFCD88
you should see
pub 4096R/0EBFCD88 2017-02-22
Key fingerprint = 9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88
uid Docker Release (CE deb) <[email protected]>
sub 4096R/F273FCD8 2017-02-22
make sure the fingerprint matches, then install docker, and set yourself up to use it
sudo add-apt-repository \
"deb [arch=amd64] https://download.docker.com/linux/$(. /etc/os-release; echo "$ID") \
$(lsb_release -cs) \
stable"
sudo apt-get update
sudo apt-get -y install docker-ce
the above command ate my copy pasta when i ran it, so for ease of cutting and pasting, heres the next block on its own
sudo groupadd docker
sudo usermod -aG docker user
sudo systemctl enable docker
Thats all for the templatevm. save and poweroff.
To make sure your appvms get to keep any customizations you need to do this in each AppVM as root
mkdir -p /rw/config/qubes-bind-dirs.d
cat << EOF > /rw/config/qubes-bind-dirs.d/50_user.conf
binds+=( '/var/lib/docker' )
binds+=( '/etc/docker' )
EOF
Restart the AppVM
If it all worked, you should be able to make an appvm based on your dockerhost template, and run
docker run hello-world
The first time, it will download the hello-world docker image. If you restart the appvm, and docker run hello-world again, it should just run without having to download the image again.
By default, appvms only get 2G of storage. In the appvm settings from the qubes-manager, the first tab has "Disk Settings" where you can increase private storage size.
(Opal Raava on how to expose a docker service to the outside world)[https://groups.google.com/forum/#!topic/qubes-users/wFRFvO4LQ9k]
(More on persistent filesystems in qubes)[https://www.qubes-os.org/doc/bind-dirs/]
Thanks @greenrd I've updated them to be commands run as root