getting a moto x back to stock on mac os x

gistfile1.md

1. grab the moto-fastboot version of fastboot here

2. grab the appropriate stock firmware here (tip: you want the one that matches your android build number in settings -> about phone)

3. unzip this file somewhere and make it easy to run the moto-fastboot-osx64 command from step 1

4. get your phone into fastboot mode, google it if needed but just power the phone off, hold the down volume key and power button for 3 seconds then let go, should get you there

5. verify you are ready for flashing:

    ./moto-fastboot-osx64 devices
    -- should list a device --
   

6. most of the time you just need to flash system and recovery images, so from your unzipped stock firmware files do this:

    ./moto-fastboot-osx64 flash recovery recovery.img
    ./moto-fastboot-osx64 flash system system.img
   

If you take a look at the XML file that came with the SBF package, you can get a good idea for what needs to happen to do a full stock restore. If you follow above, you won't lose any of your data and will be able to flash any OTAs without much difficulty. This also mostly applies to people that haven't flashed any custom ROMs and rather just rooted and may have tweaked a couple things.

Hey there! And what needs to be done, that would remove the warning about an open boot loader?

I have the big problem that the side http://sbf.droid-developers.org/ghost_rcica/list.php seems to be down. Does anybody know an alternative side? Or knows where you can download stock images for the moto x xt1052?

@retat
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1

i ran the first command 'flash recovery' and this was the output in my mac Terminal
sending 'recovery' (10280 KB)... OKAY [ 0.339s]
writing 'recovery'... OKAY [ 1.812s]

and here was the messages in my Moto E (1st Gen)
USB Connecte
cmd: download: 00a0a000
cmd: flash:recovery

when i tried running the second command 'flash system' , i could not find a system.img . Instead am seeing system.img_sparsechunk.0 , system.img_sparsechunk.1 and system.img_sparsechunk.2

I tried running the following command in the Mac Termnial and it is still giving errors

./moto-fastboot-osx64 flash system ./MotoEFirmware.xml/system.img_sparsechunk.0
sending 'system' (243147 KB)... OKAY [ 7.840s]
writing 'system'... INFOInvalid signed image
INFOPreflash validation failed
FAILED (remote failure)

corresponding results in my Moto E is 'version downgraded for system' 'Invalid PIV signed system image'

what should i do next ?

I can't get moto-fastboot to work on my macOS Mojave. I've made a copy of it into /usr/bin/ and reboot, but it always give mes this error --> ERROR: Couldn't create a device interface iterator: (e00002bd)

I also always have signature failure so fastboot doesn't flash the .img original files I've downloaded from Motorola website. This is why I would like to try moto-fastboot instead.

Any clue of what I can do to have it working? Thank you very much!