-
-
Save crmcmullen/a50124a1bea9e57b24ed0ce892b54e3f to your computer and use it in GitHub Desktop.
| firewall { | |
| all-ping enable | |
| broadcast-ping disable | |
| ipv6-receive-redirects disable | |
| ipv6-src-route disable | |
| ip-src-route disable | |
| log-martians enable | |
| name WAN_IN { | |
| default-action drop | |
| description "WAN to internal" | |
| rule 10 { | |
| action accept | |
| description "Allow established/related" | |
| state { | |
| established enable | |
| related enable | |
| } | |
| } | |
| rule 20 { | |
| action drop | |
| description "Drop invalid state" | |
| state { | |
| invalid enable | |
| } | |
| } | |
| } | |
| name WAN_LOCAL { | |
| default-action drop | |
| description "WAN to router" | |
| rule 10 { | |
| action accept | |
| description "Allow established/related" | |
| state { | |
| established enable | |
| related enable | |
| } | |
| } | |
| rule 20 { | |
| action drop | |
| description "Drop invalid state" | |
| state { | |
| invalid enable | |
| } | |
| } | |
| } | |
| options { | |
| mss-clamp { | |
| interface-type pppoe | |
| mss 1452 | |
| } | |
| } | |
| receive-redirects disable | |
| send-redirects enable | |
| source-validation disable | |
| syn-cookies enable | |
| } | |
| interfaces { | |
| ethernet eth0 { | |
| description Local | |
| duplex auto | |
| speed auto | |
| } | |
| ethernet eth1 { | |
| description Local | |
| duplex auto | |
| speed auto | |
| } | |
| ethernet eth2 { | |
| description Local | |
| duplex auto | |
| speed auto | |
| } | |
| ethernet eth3 { | |
| description Local | |
| duplex auto | |
| speed auto | |
| } | |
| ethernet eth4 { | |
| description Local | |
| duplex auto | |
| speed auto | |
| } | |
| ethernet eth5 { | |
| speed auto | |
| duplex auto | |
| vif 201 { | |
| description "CenturyLink WAN (PPPoE)" | |
| pppoe 5 { | |
| default-route auto | |
| firewall { | |
| in { | |
| name WAN_IN | |
| } | |
| local { | |
| name WAN_LOCAL | |
| } | |
| } | |
| mtu 1492 | |
| name-server auto | |
| password ******** | |
| user-id [email protected] | |
| } | |
| } | |
| } | |
| loopback lo { | |
| } | |
| switch switch0 { | |
| address 192.168.1.1/24 | |
| description Local | |
| switch-port { | |
| interface eth1 | |
| interface eth2 | |
| interface eth3 | |
| interface eth4 | |
| } | |
| } | |
| } | |
| port-forward { | |
| auto-firewall enable | |
| hairpin-nat enable | |
| lan-interface switch0 | |
| wan-interface eth5.201 | |
| } | |
| service { | |
| dhcp-server { | |
| disabled false | |
| hostfile-update disable | |
| shared-network-name LAN { | |
| authoritative enable | |
| subnet 192.168.1.0/24 { | |
| default-router 192.168.1.1 | |
| dns-server 192.168.1.1 | |
| lease 86400 | |
| start 192.168.1.140 { | |
| stop 192.168.1.240 | |
| } | |
| } | |
| } | |
| } | |
| dns { | |
| forwarding { | |
| cache-size 500 | |
| listen-on switch0 | |
| name-server 8.8.8.8 | |
| name-server 8.8.4.4 | |
| } | |
| } | |
| gui { | |
| http-port 80 | |
| https-port 443 | |
| older-ciphers enable | |
| } | |
| nat { | |
| rule 5010 { | |
| outbound-interface pppoe5 | |
| type masquerade | |
| description "masquerade for WAN" | |
| } | |
| } | |
| ssh { | |
| port 22 | |
| protocol-version v2 | |
| } | |
| upnp2 { | |
| listen-on switch0 | |
| nat-pmp disable | |
| secure-mode enable | |
| wan eth5.201 | |
| } | |
| } | |
| system { | |
| host-name MyHome-Router | |
| login { | |
| user ubnt { | |
| authentication { | |
| encrypted-password $1$zKNoUbAo$gomzUbYvgyUMcD436Wo66. | |
| plaintext-password "" | |
| } | |
| full-name "UBNT Admin" | |
| level admin | |
| } | |
| } | |
| name-server 8.8.8.8 | |
| name-server 8.8.4.4 | |
| ntp { | |
| server 0.us.pool.ntp.org { | |
| } | |
| server 1.us.pool.ntp.org { | |
| } | |
| server 2.us.pool.ntp.org { | |
| } | |
| server 3.us.pool.ntp.org { | |
| } | |
| } | |
| offload { | |
| hwnat enable | |
| ipsec enable | |
| } | |
| syslog { | |
| global { | |
| facility all { | |
| level notice | |
| } | |
| facility protocols { | |
| level debug | |
| } | |
| } | |
| } | |
| time-zone America/Boise | |
| traffic-analysis { | |
| dpi enable | |
| export enable | |
| } | |
| } |
First, I was cobbling together instructions from multiple sources to arrive at my solution and the PPPOE config is from the example I was using. And second the line that was brought to my tech closet in my house was terminated with an ethernet connector, so that's what I had to work with. 😏
The only real added benefit to the SFP version of the EdgeRouter is that using it frees up a port on your switch. Otherwise you could totally configure one of the ethernet ports as your inbound WAN. In fact I did that until my SFP arrived and then I reconfigured to use that and free up an ethernet port on the switch.
What you're all seeing here is the final configuration I put in place, which i've been running without a problem since I published this. The secret sauce is to remember to enable hardware NAT.
@jeffkirsch
Looking at the documentation here, it looks like since this is a MediaTek-based device, the "hwnat enable" in this config block should enable hardware offloading for Bridging, DPI, NAT, VLANs, GRE, & PPPoE. I may be missing something though.
My EdgeRouter X SFP should be coming this week so I hope to get it set up using this. I already bought the SFP for ethernet from the link above, so crossing my fingers everything works as expected! Thanks for sharing!
Edit: It worked! After initially upgrading the firmware, I did get some warnings after loading this config.boot file. I also had to manually run both commands to enable hardware offloading, but in the end, it worked. Now I am just waiting on my PoE injector to get here, since I mistakenly thought the ER-X-SFP's passive 24V PoE supported the power needs of the UniFi 6 Lite.
This may well save my weekend. A couple questions if you’re willing:
I’ll be using the EdgeRouter X - no SFP, but I’m assuming changes should be trivial. To clarify the question and response above, though - I think @gattimassimo was asking about skipping the ONT by using a fiber SFP. Since you linked to an Ethernet SFP, I’m guessing that’s not what you’re doing (I’m not even sure that’s possible?) but I’d love to find out otherwise. If I am correct here, is there a benefit to using the SFP version of the EdgeRouter (I could still exchange.)?
Second, you don’t appear to be offloading PPPOE. Is there a reason? Seems like that’s a meaty process that would benefit from coming off the software as well.
Anything else I should look out for? Thanks!