Gentoo network configuration for Draytek VigorNIC 132 in Bridge Mode for Deutsche Telekom Entertain (with OpenVPN tap device)

etc conf.d net

# Gentoo network configuration for Draytek VigorNIC 132 in Bridge Mode for Deutsche Telekom Entertain (with OpenVPN tap device)
# eth0 = VigorNIC, eth1 = unused (VM Network), eth2 = physical NIC to internal network
# tap0 = OpenVPN device, br0 = bridge for OpenVPN
#
# 192.168.2.0/24 internal network
# 192.168.200.0/24 VM network
# 192.168.1.1 VigorNIC webinterface 
#
# create symlinks net.eth0, net.eth1, net.eth2, net.br0, net.ppp0, net.tap0 
# 
# use dhcpcd for ppp0 to get a prefix delegation
# use radvd to announce IPv6 configuration to internal network
# use igmpproxy for IPTV


modules="tuntap ethtool bridge arping iproute2 pppoe !ip6rd !wpa_supplicant !iwconfig !ssidnet !apipa dhcpcd !pump !dhclient"
# only dhcpcd supports the classless static routes. dhcpcd 7.0 didnt work for me, used 6.11.5

depend_br0() {
   need  net.eth2 net.tap0
}

tuntap_tap0="tap"
config_tap0="null"
mac_tap0="fe:86:fe:45:ca:fe"
config_eth2="null"
config_br0="192.168.2.1/24"
bridge_br0="eth2 tap0"

bridge_forward_delay_br0=1500
bridge_hello_time_br0=200
bridge_stp_state_br0=1

config_eth1="192.168.200.1/24"

config_eth0="192.168.1.2/24"
rc_net_ppp0_need="net.eth0"

vlans_eth0="7 8"
config_eth0_7="null" # VLAN7 Internet
config_eth0_8="dhcp" # VLAN8 IPTV
config_ppp0="ppp"
link_ppp0="eth0.7"
plugins_ppp0="pppoe"
username_ppp0="[email protected]"
password_ppp0="XXXXXXXXX"
pppd_ppp0="
defaultroute
+ipv6"