i3config

.i3status.conf

general {
        colors = true
        interval = 5
	color_good = "#334433"
	color_bad = "#443333"
	color_separator = "#111111"
}

#order += "ipv6"
#order += "disk /"
#order += "run_watch DHCP"
#order += "run_watch VPN"
order += "wireless wlan0"
order += "ethernet eth0"
order += "battery 0"
#order += "load"
order += "tztime local"
order += "volume master"

wireless wlan0 {
        format_up = "(%quality at %essid) %ip"
        #format_down = "W: down"
        format_down = ""
}

ethernet eth0 {
        # if you use %speed, i3status requires root privileges
        #format_up = "E: %ip (%speed)"
        format_up = "%ip"
        #format_down = "E: down"
        format_down = ""
}

battery 0 {
        #format = "%status %percentage %remaining"
        format = "%status %percentage"
}

run_watch DHCP {
        pidfile = "/var/run/dhclient*.pid"
}

run_watch VPN {
        pidfile = "/var/run/vpnc/pid"
}

tztime local {
        #format = "%Y-%m-%d %H:%M:%S"
        format = "%H:%M %m/%d cw%W"
}

load {
        format = "%1min"
}

disk "/" {
        format = "%avail"
}

volume master {
                   format = "♪%volume"
                   format_muted = "♪   "
                   device = "default"
                   mixer = "Master"
                   mixer_idx = 0
}

config

#volume
#bindsym XF86AudioRaiseVolume exec --no-startup-id amixer set Master 2+ && killall -USR1 i3status #increase sound volume
bindsym XF86AudioRaiseVolume exec --no-startup-id amixer set Master 2+ #increase sound volume
bindsym XF86AudioLowerVolume exec --no-startup-id amixer set Master 2- #decrease sound volume
bindsym XF86AudioMute exec --no-startup-id amixer set Master toggle # mute sound
# key found via xbindkeys --key
bindsym XF86Launch1 exec slock # mute sound
bindsym XF86AudioMicMute exec slock
# find key: xev
# and: xmodmap -pke


# scrot & gimp - root
bindsym Print exec scrot -e 'mv $f /tmp/ && gimp /tmp/$f'
# scrot & gimp - select window or rectangle
bindsym Mod1+Print exec scrot -s -e 'mv $f /tmp/ && gimp /tmp/$f'

#http://i3wm.org/docs/userguide.html#_reloading_restarting_exiting
#
# mod+e split h/v   mod+s stacking   mod+w tabbed   mod+f fullscreen
#
# mod+shift+space hover win

#### RULES FOR SPECIFIC APPLICATIONS ####

# by APPLICATION (WM_CLASS)
# Note: class is typically useful for applying custom settings to
#       to entire applications, including child windows. If this
#       isn't want you want see the ROLE section, below.
# Tip: To find out what these values might be run:
#       xprop | grep -i 'class'
#       xprop | egrep -i 'class|name|title|role|pop'

#for_window [class="File-roller"] floating enable, border normal
#for_window [class="Speedcrunch"] floating enable, border normal
#for_window [class="Gloobus-preview"] floating enable, border none
#for_window [class="Pavucontrol"] floating enable, border normal
for_window [class="Nautilus"] floating enable, border none
for_window [class="Vlc"] floating enable, border none
#for_window [class="Atom"] floating enable, border pixel 3
assign [class="Atom"] 7
#for_window [class="Firefox"] floating enable, border pixel 3
assign [class="Firefox"] 8
# firefox download window
for_window [title="Library"] floating enable, border pixel 3
#for_window [class="Thunderbird"] floating enable, border pixel 3
assign [class="Thunderbird"] 9
for_window [class="Pidgin"] floating enable, border pixel 3
for_window [title="Thunderbird Preferences"] floating enable, border pixel 3
for_window [class="Pinentry-gtk-2"] floating enable, border pixel 3
# 
for_window [class="Evince"] floating enable, border pixel 3
# Torbrowser:
for_window [class="browser"] floating enable, border pixel 3
for_window [class="Guake"] floating enable, border none
# Tor Messenger
for_window [class="Tor Messenger" window_role="blist"] floating enable, border pixel 3, resize set 150 px 800 px
for_window [class="Tor Messenger" window_role="convs"] floating enable, border pixel 3, resize set 500 px 400 px
#for_window [class="Tor Messenger"] resize grow width 0 px or 80 ppt; move left; move left

for_window [window_role="pop-up"] floating enable
for_window [window_role="task_dialog"] floating enable
for_window [title="Preferences$"] floating enable
for_window [class="Eog"] floating enable, border none


popup_during_fullscreen smart
#smart|ignore|leave_fullscreen


# by ROLE (WM_WINDOW_ROLE)
# Note: window_role is Typically useful for effecting child windows
#       such as instant messaging converstations, email composition
#       windows, etc.
# Tip: To find out what these values might be run:
#       xprop | grep -i 'role'#
#for_window [window_role="conversation"] floating enable, border normal
#for_window [window_role="Msgcompose"] floating enable, border normal



# class                 border  backgr. text    indicator
client.focused          #000000 #222222 #444444 #666666
client.focused_inactive #000000 #111111 #222222 #222222
client.unfocused        #000000 #111111 #111111 #292d2e
client.urgent           #2f343a #900000 #ffffff #900000
#client.placeholder      #000000 #0c0c0c #ffffff #000000

client.background       #111111




focus_follows_mouse no
hide_edge_borders vertical

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!

#win:
#set $mod Mod4 
#alt
set $mod Mod1 

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
# font pango:DejaVu Sans Mono 10

# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

# start a terminal
bindsym $mod+Return exec i3-sensible-terminal
#bindsym $mod+Return exec xterm

# kill focused window
bindsym $mod+Shift+q kill

# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
bindsym $mod+space exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+h split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
#bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# switch to workspace
#bindsym Mod1+Tab workspace next
bindsym $mod+Tab workspace next
#bindsym Mod1+Shift+Tab workspace prev
bindsym $mod+Shift+Tab workspace prev
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# reload the configuration file
#bindsym $mod+Shift+c 
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
#bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym j resize shrink width 10 px or 10 ppt
        bindsym k resize grow height 10 px or 10 ppt
        bindsym l resize shrink height 10 px or 10 ppt
        bindsym semicolon resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left resize shrink width 10 px or 10 ppt
        bindsym Down resize grow height 10 px or 10 ppt
        bindsym Up resize shrink height 10 px or 10 ppt
        bindsym Right resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
	colors {
		background #000000
		statusline #404040
		separator #222222
        	#focused_workspace  #4c7899 #285577 #ffffff
	        focused_workspace  #44444 #111111 #666666
		inactive_workspace  #000000 #111111 #222222
        	active_workspace   #333333 #5f676a #ffffff
        	#inactive_workspace #333333 #222222 #888888
        	urgent_workspace   #2f343a #900000 #ffffff
	}
        status_command i3status
}