Created
March 16, 2016 23:48
-
-
Save danboid/1af4a50fc83077fbbb33 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /boot/dtb/bananapi-usb.dtb size=0x7be7 | |
| loader> boot -v | |
| Booting... | |
| Using DTB from loaded file '/boot/dtb/bananapi-usb.dtb'. | |
| Kernel entry at 0x0x42200100... | |
| Kernel args: -v | |
| KDB: debugger backends: ddb | |
| KDB: current backend: ddb | |
| Copyright (c) 1992-2016 The FreeBSD Project. | |
| Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
| The Regents of the University of California. All rights reserved. | |
| FreeBSD is a registered trademark of The FreeBSD Foundation. | |
| FreeBSD 11.0-CURRENT #0 r296485: Tue Mar 8 10:35:28 UTC 2016 | |
| root@releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/A20 arm | |
| FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) | |
| WARNING: WITNESS option enabled, expect reduced performance. | |
| VT: init without driver. | |
| Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a6d000. | |
| Preloaded dtb "/boot/dtb/bananapi-usb.dtb" at 0xc0a6d754. | |
| CPU: Cortex A7 rev 4 (Cortex-A core) | |
| Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext | |
| WB enabled LABT branch prediction disabled | |
| LoUU:2 LoC:3 LoUIS:2 | |
| Cache level 1: | |
| 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc | |
| 32KB/32B 2-way instruction cache Read-Alloc | |
| Cache level 2: | |
| 256KB/64B 8-way unified cache WB Read-Alloc Write-Alloc | |
| real memory = 1073741824 (1024 MB) | |
| avail memory = 1036029952 (988 MB) | |
| Physical memory chunk(s): | |
| 0x40000000 - 0x7fffffff, 1024 MB ( 262144 pages) | |
| Excluded memory regions: | |
| 0x42200000 - 0x42b53fff, 9 MB ( 2388 pages) NoAlloc | |
| Static device mappings: | |
| 0x01c00000 - 0x01ffffff mapped at VA 0xffb00000 | |
| FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs | |
| ULE: setup cpu 0 | |
| ULE: setup cpu 1 | |
| snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] | |
| feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 | |
| random: entropy device external interface | |
| nfslock: pseudo-device | |
| crypto: <crypto core> | |
| null: <full device, null device, zero device> | |
| openfirm: <Open Firmware control device> | |
| kbd0 at kbdmux0 | |
| mem: <memory> | |
| random: harvesting attach, 8 bytes (4 bits) from nexus0 | |
| ofwbus0: <Open Firmware Device Tree> | |
| simplebus0: <Flattened device tree simple bus> on ofwbus0 | |
| random: harvesting attach, 8 bytes (4 bits) from simplebus0 | |
| random: harvesting attach, 8 bytes (4 bits) from ofwbus0 | |
| gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 24 on simplebus0 | |
| Processing 3 pin-config node(s) in pinctrl-0 for spi@01c05000 | |
| Processing 2 pin-config node(s) in pinctrl-0 for mmc@01c0f000 | |
| Processing 1 pin-config node(s) in pinctrl-0 for phy@01c13400 | |
| Processing 1 pin-config node(s) in pinctrl-0 for ir@01c21800 | |
| Processing 1 pin-config node(s) in pinctrl-0 for serial@01c28000 | |
| Processing 1 pin-config node(s) in pinctrl-0 for i2c@01c2ac00 | |
| Processing 1 pin-config node(s) in pinctrl-0 for ethernet@01c50000 | |
| Processing 1 pin-config node(s) in pinctrl-0 for usb0-vbus | |
| Processing 1 pin-config node(s) in pinctrl-0 for usb1-vbus | |
| Processing 1 pin-config node(s) in pinctrl-0 for usb2-vbus | |
| Processing 1 pin-config node(s) in pinctrl-0 for leds | |
| Processing 1 pin-config node(s) in pinctrl-0 for gmac-3v3 | |
| random: harvesting attach, 8 bytes (4 bits) from gpio0 | |
| gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c82fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 54 on simplebus0 | |
| gic0: pn 0x10, arch 0x2, rev 0x1, implementer 0x43b irqs 160 | |
| random: harvesting attach, 8 bytes (4 bits) from gic0 | |
| generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0 | |
| gic0: unsupported trigger/polarity configuration 0x08 | |
| gic0: unsupported trigger/polarity configuration 0x08 | |
| gic0: unsupported trigger/polarity configuration 0x08 | |
| Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 | |
| Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 | |
| random: harvesting attach, 8 bytes (4 bits) from generic_timer0 | |
| rtc0: <Allwinner RTC> mem 0x1c20d00-0x1c20d1f irq 27 on simplebus0 | |
| rtc0: Using external oscillator | |
| rtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) | |
| random: harvesting attach, 8 bytes (4 bits) from rtc0 | |
| a10_ccm0: <Allwinner Clock Control Module> mem 0x1c20000-0x1c203ff on simplebus0 | |
| random: harvesting attach, 8 bytes (4 bits) from a10_ccm0 | |
| cpulist0: <Open Firmware CPU Group> on ofwbus0 | |
| cpu0: <Open Firmware CPU> on cpulist0 | |
| cpu0: missing 'clock-frequency' property | |
| random: harvesting attach, 8 bytes (4 bits) from cpu0 | |
| cpu1: <Open Firmware CPU> on cpulist0 | |
| cpu1: missing 'clock-frequency' property | |
| random: harvesting attach, 8 bytes (4 bits) from cpu1 | |
| random: harvesting attach, 8 bytes (4 bits) from cpulist0 | |
| ofwbus0: <pmu> irq 4,5 compat arm,cortex-a7-pmu (no driver attached) | |
| simplebus0: <sram-controller@01c00000> mem 0x1c00000-0x1c0002f compat allwinner,sun4i-a10-sram-controller (no driver attached) | |
| simplebus0: <interrupt-controller@01c00030> mem 0x1c00030-0x1c0003b irq 6 compat allwinner,sun7i-a20-sc-nmi (no driver attached) | |
| a10dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 7 on simplebus0 | |
| random: harvesting attach, 8 bytes (4 bits) from a10dmac0 | |
| simplebus0: <spi@01c05000> mem 0x1c05000-0x1c05fff irq 8 compat allwinner,sun4i-a10-spi (no driver attached) | |
| simplebus0: <spi@01c06000> mem 0x1c06000-0x1c06fff irq 9 disabled compat allwinner,sun4i-a10-spi (no driver attached) | |
| simplebus0: <ethernet@01c0b000> mem 0x1c0b000-0x1c0bfff irq 10 disabled compat allwinner,sun4i-a10-emac (no driver attached) | |
| simplebus0: <mdio@01c0b080> mem 0x1c0b080-0x1c0b093 disabled compat allwinner,sun4i-a10-mdio (no driver attached) | |
| a10_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 11 on simplebus0 | |
| a10_mmc0: DMA status: enabled | |
| mmc0: <MMC/SD bus> on a10_mmc0 | |
| random: harvesting attach, 8 bytes (4 bits) from mmc0 | |
| random: harvesting attach, 8 bytes (4 bits) from a10_mmc0 | |
| simplebus0: <mmc@01c10000> mem 0x1c10000-0x1c10fff irq 12 disabled compat allwinner,sun5i-a13-mmc (no driver attached) | |
| simplebus0: <mmc@01c11000> mem 0x1c11000-0x1c11fff irq 13 disabled compat allwinner,sun5i-a13-mmc (no driver attached) | |
| simplebus0: <mmc@01c12000> mem 0x1c12000-0x1c12fff irq 14 disabled compat allwinner,sun5i-a13-mmc (no driver attached) | |
| simplebus0: <usb@01c13000> mem 0x1c13000-0x1c133ff irq 15 compat allwinner,sun4i-a10-musb (no driver attached) | |
| awusbphy0: <Allwinner USB PHY> mem 0x1c13400-0x1c1340f,0x1c14800-0x1c14803,0x1c1c800-0x1c1c803 on simplebus0 | |
| random: harvesting attach, 8 bytes (4 bits) from awusbphy0 | |
| ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c14000-0x1c140ff irq 16 on simplebus0 | |
| usbus0: EHCI version 1.0 | |
| usbus0 on ehci0 | |
| ehci0: usbpf: Attached | |
| random: harvesting attach, 8 bytes (4 bits) from usbus0 | |
| random: harvesting attach, 8 bytes (4 bits) from ehci0 | |
| simplebus0: <usb@01c14400> mem 0x1c14400-0x1c144ff irq 17 compat allwinner,sun7i-a20-ohci (no driver attached) | |
| simplebus0: <crypto-engine@01c15000> mem 0x1c15000-0x1c15fff irq 18 compat allwinner,sun4i-a10-crypto (no driver attached) | |
| simplebus0: <spi@01c17000> mem 0x1c17000-0x1c17fff irq 19 disabled compat allwinner,sun4i-a10-spi (no driver attached) | |
| ahci0: <Allwinner Integrated AHCI controller> mem 0x1c18000-0x1c18fff irq 20 on simplebus0 | |
| ahci0: AHCI v1.10 with 1 3Gbps ports, Port Multiplier not supported | |
| ahci0: quirks=0x2<NOPMP> | |
| ahci0: Caps: NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC 1ports | |
| ahcich0: <AHCI channel> at channel 0 on ahci0 | |
| ahcich0: Caps: | |
| random: harvesting attach, 8 bytes (4 bits) from ahcich0 | |
| random: harvesting attach, 8 bytes (4 bits) from ahci0 | |
| ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff irq 21 on simplebus0 | |
| usbus1: EHCI version 1.0 | |
| usbus1 on ehci1 | |
| ehci1: usbpf: Attached | |
| random: harvesting attach, 8 bytes (4 bits) from usbus1 | |
| random: harvesting attach, 8 bytes (4 bits) from ehci1 | |
| simplebus0: <usb@01c1c400> mem 0x1c1c400-0x1c1c4ff irq 22 compat allwinner,sun7i-a20-ohci (no driver attached) | |
| simplebus0: <spi@01c1f000> mem 0x1c1f000-0x1c1ffff irq 23 disabled compat allwinner,sun4i-a10-spi (no driver attached) | |
| gpiobus0: <OFW GPIO bus> on gpio0 | |
| gpioled0: <GPIO led> at pin 149 on gpiobus0 | |
| random: harvesting attach, 8 bytes (4 bits) from gpioled0 | |
| random: harvesting attach, 8 bytes (4 bits) from gpiobus0 | |
| gpioc0: <GPIO controller> on gpio0 | |
| random: harvesting attach, 8 bytes (4 bits) from gpioc0 | |
| simplebus0: <timer@01c20c00> mem 0x1c20c00-0x1c20c8f irq 25,26,27,28,29,30 compat allwinner,sun4i-a10-timer (no driver attached) | |
| aw_wdog0: <Allwinner A10 Watchdog> mem 0x1c20c90-0x1c20c9f on simplebus0 | |
| random: harvesting attach, 8 bytes (4 bits) from aw_wdog0 | |
| simplebus0: <pwm@01c20e00> mem 0x1c20e00-0x1c20e0b disabled compat allwinner,sun7i-a20-pwm (no driver attached) | |
| simplebus0: <ir@01c21800> mem 0x1c21800-0x1c2183f irq 31 compat allwinner,sun4i-a10-ir (no driver attached) | |
| simplebus0: <ir@01c21c00> mem 0x1c21c00-0x1c21c3f irq 32 disabled compat allwinner,sun4i-a10-ir (no driver attached) | |
| simplebus0: <lradc@01c22800> mem 0x1c22800-0x1c228ff irq 33 disabled compat allwinner,sun4i-a10-lradc-keys (no driver attached) | |
| pcm0: <Allwinner Audio Codec> mem 0x1c22c00-0x1c22c3f irq 34 on simplebus0 | |
| pcm0: Mixer "vol": | |
| pcm0: Mixer "line": | |
| pcm0: Mixer "rec": | |
| random: harvesting attach, 8 bytes (4 bits) from pcm0 | |
| simplebus0: <eeprom@01c23800> mem 0x1c23800-0x1c239ff compat allwinner,sun7i-a20-sid (no driver attached) | |
| simplebus0: <rtp@01c25000> mem 0x1c25000-0x1c250ff irq 35 compat allwinner,sun5i-a13-ts (no driver attached) | |
| uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 36 on simplebus0 | |
| uart0: console (8861,n,8,1) | |
| uart0: fast interrupt | |
| uart0: PPS capture mode: DCDinvalid | |
| random: harvesting attach, 8 bytes (4 bits) from uart0 | |
| simplebus0: <serial@01c28400> mem 0x1c28400-0x1c287ff irq 37 disabled compat snps,dw-apb-uart (no driver attached) | |
| simplebus0: <serial@01c28800> mem 0x1c28800-0x1c28bff irq 38 disabled compat snps,dw-apb-uart (no driver attached) | |
| simplebus0: <serial@01c28c00> mem 0x1c28c00-0x1c28fff irq 39 disabled compat snps,dw-apb-uart (no driver attached) | |
| simplebus0: <serial@01c29000> mem 0x1c29000-0x1c293ff irq 40 disabled compat snps,dw-apb-uart (no driver attached) | |
| simplebus0: <serial@01c29400> mem 0x1c29400-0x1c297ff irq 41 disabled compat snps,dw-apb-uart (no driver attached) | |
| simplebus0: <serial@01c29800> mem 0x1c29800-0x1c29bff irq 42 disabled compat snps,dw-apb-uart (no driver attached) | |
| simplebus0: <serial@01c29c00> mem 0x1c29c00-0x1c29fff irq 43 disabled compat snps,dw-apb-uart (no driver attached) | |
| iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1c2ac00-0x1c2afff irq 44 on simplebus0 | |
| iicbus0: <OFW I2C bus> on iichb0 | |
| iic0: <I2C generic I/O> on iicbus0 | |
| random: harvesting attach, 8 bytes (4 bits) from iic0 | |
| axp209_pmu0: <X-Power AXP209 Power Management Unit> at addr 0x68 irq 57 on iicbus0 | |
| axp209_pmu0: AXP209 Powered by AC and USB | |
| random: harvesting attach, 8 bytes (4 bits) from axp209_pmu0 | |
| random: harvesting attach, 8 bytes (4 bits) from iicbus0 | |
| random: harvesting attach, 8 bytes (4 bits) from iichb0 | |
| simplebus0: <i2c@01c2b000> mem 0x1c2b000-0x1c2b3ff irq 45 disabled compat allwinner,sun7i-a20-i2c (no driver attached) | |
| simplebus0: <i2c@01c2b400> mem 0x1c2b400-0x1c2b7ff irq 46 disabled compat allwinner,sun7i-a20-i2c (no driver attached) | |
| simplebus0: <i2c@01c2b800> mem 0x1c2b800-0x1c2bbff irq 47 disabled compat allwinner,sun7i-a20-i2c (no driver attached) | |
| simplebus0: <i2c@01c2c000> mem 0x1c2c000-0x1c2c3ff irq 48 disabled compat allwinner,sun7i-a20-i2c (no driver attached) | |
| dwc0: <A20 Gigabit Ethernet Controller> mem 0x1c50000-0x1c5ffff irq 49 on simplebus0 | |
| miibus0: <MII bus> on dwc0 | |
| rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0 | |
| rgephy0: OUI 0x00e04c, model 0x0011, rev. 5 | |
| rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
| random: harvesting attach, 8 bytes (4 bits) from rgephy0 | |
| rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 | |
| rgephy1: OUI 0x00e04c, model 0x0011, rev. 5 | |
| rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
| random: harvesting attach, 8 bytes (4 bits) from rgephy1 | |
| random: harvesting attach, 8 bytes (4 bits) from miibus0 | |
| dwc0: bpf attached | |
| dwc0: Ethernet address: 02:09:04:c2:82:f8 | |
| random: harvesting attach, 8 bytes (4 bits) from dwc0 | |
| simplebus0: <hstimer@01c60000> mem 0x1c60000-0x1c60fff irq 50,51,52,53 compat allwinner,sun7i-a20-hstimer (no driver attached) | |
| simplebus0: <ps2@01c2a000> mem 0x1c2a000-0x1c2a3ff irq 55 disabled compat allwinner,sun4i-a10-ps2 (no driver attached) | |
| simplebus0: <ps2@01c2a400> mem 0x1c2a400-0x1c2a7ff irq 56 disabled compat allwinner,sun4i-a10-ps2 (no driver attached) | |
| simplebus0: <hdmi@01c16000> mem 0x1c16000-0x1c16fff disabled compat allwinner,sun7i-a20-hdmi (no driver attached) | |
| simplebus0: <hdmiaudio> disabled compat allwinner,sun7i-a20-hdmiaudio (no driver attached) | |
| fb0: <Allwinner Framebuffer> mem 0x1e60000-0x1e6ffff,0x1c0c000-0x1c0cfff on simplebus0 | |
| random: harvesting attach, 8 bytes (4 bits) from fb0 | |
| ofwbus0: <ahci-5v> disabled compat regulator-fixed (no driver attached) | |
| ofwbus0: <usb0-vbus> compat regulator-fixed (no driver attached) | |
| ofwbus0: <usb1-vbus> compat regulator-fixed (no driver attached) | |
| ofwbus0: <usb2-vbus> compat regulator-fixed (no driver attached) | |
| ofwbus0: <vcc3v0> compat regulator-fixed (no driver attached) | |
| ofwbus0: <vcc3v3> compat regulator-fixed (no driver attached) | |
| ofwbus0: <vcc5v0> compat regulator-fixed (no driver attached) | |
| ofwbus0: <leds> compat gpio-leds (no driver attached) | |
| ofwbus0: <gmac-3v3> compat regulator-fixed (no driver attached) | |
| cryptosoft0: <software crypto> | |
| crypto: assign cryptosoft0 driver id 0, flags 100663296 | |
| crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 | |
| crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 | |
| random: harvesting attach, 8 bytes (4 bits) from cryptosoft0 | |
| procfs registered | |
| Timecounters tick every 10.000 msec | |
| IPsec: Initialized Security Association Processing. | |
| tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192 | |
| lo0: bpf attached | |
| mmc0: Probing bus | |
| a10_mmc0: timeout updating clock | |
| usbus0: 480Mbps High Speed USB v2.0 | |
| usbus1: 480Mbps High Speed USB v2.0 | |
| ahcich0: AHCI reset... | |
| ahcich0: SATA connect time=100us status=00000123 | |
| ugen0.1: <Allwinner> at usbus0 | |
| uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 | |
| ugen1.1: <Allwinner> at usbus1 | |
| uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 | |
| ahcich0: AHCI reset: device found | |
| ahcich0: AHCI reset: device ready after 0ms | |
| pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 | |
| pass0: <ST2000LM003 HN-M201RAD 2BE10001> ATA8-ACS SATA 3.x device | |
| pass0: Serial Number S377J9FGC05642 | |
| pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | |
| pass0: Command Queueing enabled | |
| ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 | |
| ada0: <ST2000LM003 HN-M201RAD 2BE10001> ATA8-ACS SATA 3.x device | |
| ada0: Serial Number S377J9FGC05642 | |
| ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | |
| ada0: Command Queueing enabled | |
| ada0: 1907729MB (3907029168 512 byte sectors) | |
| GEOM: new disk ada0 | |
| uhub1: 1 port with 1 removable, self powered | |
| random: harvesting attach, 8 bytes (4 bits) from uhub1 | |
| uhub0: 1 port with 1 removable, self powered | |
| random: harvesting attach, 8 bytes (4 bits) from uhub0 | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| mmc0: SD probe: failed | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| random: unblocking device. | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| a10_mmc0: controller timeout | |
| a10_mmc0: timeout updating clock | |
| mmc0: MMC probe: failed | |
| mmc0: Current OCR: 0x00000000 | |
| mmc0: No compatible cards found on bus | |
| Release APs | |
| WARNING: WITNESS option enabled, expect reduced performance. | |
| Trying to mount root from ufs:/dev/ufs/rootfs [rw]... | |
| mountroot: waiting for device /dev/ufs/rootfs... | |
| Mounting from ufs:/dev/ufs/rootfs failed with error 19. | |
| Loader variables: | |
| vfs.root.mountfrom=ufs:/dev/ufs/rootfs | |
| vfs.root.mountfrom.options=rw | |
| Manual root filesystem specification: | |
| <fstype>:<device> [options] | |
| Mount <device> using filesystem <fstype> | |
| and with the specified (optional) option list. | |
| eg. ufs:/dev/da0s1a | |
| zfs:tank | |
| cd9660:/dev/cd0 ro | |
| (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) | |
| ? List valid disk boot devices | |
| . Yield 1 second (for background tasks) | |
| <empty line> Abort manual input | |
| mountroot> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment