Fix error : RPC failed; curl 92 HTTP/2 stream 0 was not closed cleanly: PROTOCOL_ERROR (err 1)

git-config-http-version.md

git config --global http.version HTTP/1.1
git config --global http.postBuffer 157286400

What's the problem actually

git config --global http.postBuffer 157286400
execute the command above and if it still the same issue just restart your machine and it will work .

I fixed my same problem by changing my network(connected to my mobile data got it installed with in 10secs which i spend figuring out for 2 days)

Buenas tardes necesito solucionar este problema con mi github cuando quiero subirlo a un repositorio me tira el error
error: RPC failed; HTTP 400 curl 92 HTTP/2 stream 7 was not closed cleanly: CANCEL (err 8)
send-pack: unexpected disconnect while reading sideband packet
Writing objects: 100% (43/43), 3.11 MiB | 210.00 KiB/s, done.
Total 43 (delta 0), reused 0 (delta 0), pack-reused 0 (from 0)
fatal: the remote end hung up unexpectedly
Everything up-to-date
Si alguien puede brindarme una solucion desde ya muchisimas gracias

On WSL, switch to SSH.

First create ssh keys:
cd ~/.ssh
ssh-keygen -o -t rsa -C "[email protected]"
(email address doesn't actually matter, you can put whatevers)

Then print the relevant info:
cat id_rsa.pub

Copy paste this into
Github->Upper right menu->Settings
SSH and GPG keys -> New SSH Key -> title = anything, keytype = authorization, paste the key into the box

You will then have to verify your idenitiy.

Then tell git to use SSH:
git config --global url."[email protected]:".insteadOf "https://github.com/"

Everything should work now

On WSL, switch to SSH.

First create ssh keys: cd ~/.ssh ssh-keygen -o -t rsa -C "[email protected]" (email address doesn't actually matter, you can put whatevers)

Then print the relevant info: cat id_rsa.pub

Copy paste this into Github->Upper right menu->Settings SSH and GPG keys -> New SSH Key -> title = anything, keytype = authorization, paste the key into the box

You will then have to verify your idenitiy.

Then tell git to use SSH: git config --global url."[email protected]:".insteadOf "https://github.com/"

Everything should work now

@cwm9cwm9 didn't work, how to undo it?

worked for me with this commands and then changing directory to another.
git config --global http.version HTTP/1.1
git config --global http.postBuffer 157286400

You can try increasing post buffer size using git config --global http.postBuffer 157286400

Thanks great solutionn

Thanks a lot for the solution ...it worked for me

git config --global http.postBuffer 524288000

Thank you so much! This was exactly what I needed. Well done.

git config --global http.postBuffer 524288000

error: RPC failed; curl 18 transfer closed with outstanding read data remaining

Thanks! This solved my problem.

In my case, the error was caused by a previous improper shutdown, which led to the network card data not being cleared. The command sudo ifconfig eth0 down is used to bring down the network interface, where eth0 is the name of the network interface. In Linux, you can use the command ip a to obtain the name of your network interface.

git config --global http.postBuffer 157286400 worked for me. Thanks!

Change of network worked for me ..

yeah i switched to mobile newtork and it worked for me as well

Same, after trying so many solution, using a hotspot solved this problem. (My phone is connected to the same wifi)

Worked for me.

git config --global http.postBuffer 157286400 worked for me. Thanks!

Many thanks, its worked for me.

I followed the instruction, but the download speed is too slow.
So I canceled it and switch back to HTTP/2 using
git config --global http.version HTTP/2
and it worked.
Hope this also work for others. Thank you.