gistfile1.txt

#!/bin/bash

URL="http://192.168.10.10:8123"

function set_config_param {
  curl -X POST "${URL}/api/services/zwave/set_config_parameter" -H "Content-Type: application/json" --data "{ \"node_id\": ${1}, \"parameter\": ${2}, \"value\": ${3} }"
}				

function set_wakeup {
  curl -X POST "${URL}/api/services/zwave/set_wakeup" -H "Content-Type: application/json" --data "{\"node_id\": ${1}, \"value\": ${2}}"
}

function get_config {
  curl -X POST "${URL}/api/services/zwave/print_config_parameter" -H "Content-Type: application/json" --data "{ \"node_id\": ${1}, \"parameter\": ${2} }"
}
function print_node {
  curl -X POST "${URL}/api/services/zwave/print_node" -H "Content-Type: application/json" --data "{ \"node_id\": ${1} }"
}

arg_node=$1

# accepted node ids (smoke sensors)
nodes="60 66 56 61 58 59 65 57 62"
echo "set firealarms"
for node in $nodes
do
 [[ "$arg_node" != "" ]] && [[ "$node" != "$arg_node" ]] && continue
 set_wakeup $node 26100 
 sleep 1
 set_config_param $node 20 1
 sleep 1
 set_config_param $node 21 2
 sleep 1
 echo "done node id: $node"
done

#get_config $node 62 1200
#sleep 1
#get_config $node 64 1200
#sleep 1

# accepted node ids (motion sensors)
nodes="44 45 46 47 49 50"
echo "set motion sensors"
for node in $nodes
do
 [[ "$arg_node" != "" ]] && [[ "$node" != "$arg_node" ]] && continue
 set_wakeup $node 26100 
 sleep 1
 set_config_param $node 40 250      # ( lumi threshold )
 sleep 1
 set_config_param $node 42 3600     # ( lumi report interval ) 
 sleep 1
 set_config_param $node 60 2        # ( temp threshold ) 
 sleep 1
set_config_param $node 62 1200      # ( temp measure interval ) 
 sleep 1
 set_config_param $node 64 0        # ( temp report interval ) 
 sleep 1
 set_config_param $node 80 0        # ( visual LED indicator ) 
 sleep 1
 set_config_param $node 2 15        # ( blind after motion time 0-15secs )
 sleep 1
 set_config_param $node 1 8         # ( motion detect sensitivity 8-255, lower == more sensitive)
 sleep 1
 set_config_param $node 3 0         # ( pulse counter, 0 - 3 (1 to 4 pulses needed)
 sleep 1
 set_config_param $node 4 3         # ( window for the pulse(s) to occure, 0 - 3 (4 - 16 secs)
 sleep 1
 set_config_param $node 8 2         # ( motion, op mode: 0=always, 1=day, 2=night
 sleep 1
 set_config_param $node 18 0        # ( send all association groups as non-secure )
 sleep 1

 echo "done node id: $node"
done

# fire: 60 66 56 61 58 59 65
# 20 temp report interval: 1 (min 10secs)
# 21 temp threshold: 2 (0.2°C)

# motion: 44 45 46 47 49 50
# 42 = 2000   (luminance update)   RIGHT????
# 62 = 1200   (temp update)        RIGHT????
# 64 = 1200   (temp measure)       RIGHT????
# 2 = 15      (blind time)    
# 1 = 8       (sensitivity)
# 3 = 0       (pulses needed) 
# 4 = 3       (pulses window)
# 8 = 2       (when active, only nighttime)

######## wakeup parameter is at: 43200 -> half a day ;)
#### fibaro configuration parameters:
#### "1"  := "10"         (PIR sensitivity: 8 - 255, smaller->more sensitive, default="15")
#### "2"  := "10"         (blind time: 0 - 15, time [s] = 0.5 x (value + 1), default="15" (8secs), drains battery)
#### "3"  := "1"          (pulse counter, 0-3 (1-4 pulses needed for motion detection), default="1" (2 pulses))
#### "4"  := "3"          (time window for pulses to occur, 0-3 (4-16secs), default="2" (12secs))
#### "8"  := "2"          (when PIR shall be active, always (0), day(1) night(2), default="0" )
#### "9"  := "200"        (lux to be used as day/night threshold, 1-32767lux, default="200")
#### "42" := "1200"       (how often to report temperature, 0=no reports, 1-32767secs, default="3600")
#### "62" := "1200"       (how often to measure luminance, 1-32676secs, 0=none, default="900")
#### "64" := "1200"       (how often to report temperature, 0=no reports, 1-32767secs, default="0")
 

#42 -> illumination report interval -> 1 - 32767 (secs)
#62 -> temp measure interval -> 1 - 32767 (secs)
#64 -> temp report interval -> 1 - 32767 (secs)