IoT basic pub sub sample modified to use a temperature sensor attached to the GPIO: aws-iot-device-sdk-python/samples/basicPubSub/basicPubSub.py

basicPubSub.py

'''
/*
 * Copyright 2010-2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License").
 * You may not use this file except in compliance with the License.
 * A copy of the License is located at
 *
 *  http://aws.amazon.com/apache2.0
 *
 * or in the "license" file accompanying this file. This file is distributed
 * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
 * express or implied. See the License for the specific language governing
 * permissions and limitations under the License.
 */
 '''

from AWSIoTPythonSDK.MQTTLib import AWSIoTMQTTClient
import logging
import time
import argparse
import json
import Adafruit_DHT
import RPi.GPIO as GPIO

DHT_TYPE = Adafruit_DHT.DHT11
DHT_PIN = 4

GPIO.setmode(GPIO.BCM)
GPIO.setup(DHT_PIN, GPIO.IN, pull_up_down=GPIO.PUD_UP)

AllowedActions = ['both', 'publish', 'subscribe']

# Custom MQTT message callback
def customCallback(client, userdata, message):
    print("Received a new message: ")
    print(message.payload)
    print("from topic: ")
    print(message.topic)
    print("--------------\n\n")


# Read in command-line parameters
parser = argparse.ArgumentParser()
parser.add_argument("-e", "--endpoint", action="store", required=True, dest="host", help="Your AWS IoT custom endpoint")
parser.add_argument("-r", "--rootCA", action="store", required=True, dest="rootCAPath", help="Root CA file path")
parser.add_argument("-c", "--cert", action="store", dest="certificatePath", help="Certificate file path")
parser.add_argument("-k", "--key", action="store", dest="privateKeyPath", help="Private key file path")
parser.add_argument("-p", "--port", action="store", dest="port", type=int, help="Port number override")
parser.add_argument("-w", "--websocket", action="store_true", dest="useWebsocket", default=False,
                    help="Use MQTT over WebSocket")
parser.add_argument("-id", "--clientId", action="store", dest="clientId", default="my_rpi",
                    help="Targeted client id")
parser.add_argument("-t", "--topic", action="store", dest="topic", default="raspberrypi/dht11", help="Targeted topic")
parser.add_argument("-m", "--mode", action="store", dest="mode", default="publish",
                    help="Operation modes: %s"%str(AllowedActions))
parser.add_argument("-M", "--message", action="store", dest="message", default="Hello World!",
                    help="Message to publish")

args = parser.parse_args()
host = args.host
rootCAPath = args.rootCAPath
certificatePath = args.certificatePath
privateKeyPath = args.privateKeyPath
port = args.port
useWebsocket = args.useWebsocket
clientId = args.clientId
topic = args.topic

if args.mode not in AllowedActions:
    parser.error("Unknown --mode option %s. Must be one of %s" % (args.mode, str(AllowedActions)))
    exit(2)

if args.useWebsocket and args.certificatePath and args.privateKeyPath:
    parser.error("X.509 cert authentication and WebSocket are mutual exclusive. Please pick one.")
    exit(2)

if not args.useWebsocket and (not args.certificatePath or not args.privateKeyPath):
    parser.error("Missing credentials for authentication.")
    exit(2)

# Port defaults
if args.useWebsocket and not args.port:  # When no port override for WebSocket, default to 443
    port = 443
if not args.useWebsocket and not args.port:  # When no port override for non-WebSocket, default to 8883
    port = 8883

# Configure logging
logger = logging.getLogger("AWSIoTPythonSDK.core")
logger.setLevel(logging.DEBUG)
streamHandler = logging.StreamHandler()
formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')
streamHandler.setFormatter(formatter)
logger.addHandler(streamHandler)

# Init AWSIoTMQTTClient
myAWSIoTMQTTClient = None
if useWebsocket:
    myAWSIoTMQTTClient = AWSIoTMQTTClient(clientId, useWebsocket=True)
    myAWSIoTMQTTClient.configureEndpoint(host, port)
    myAWSIoTMQTTClient.configureCredentials(rootCAPath)
else:
    myAWSIoTMQTTClient = AWSIoTMQTTClient(clientId)
    myAWSIoTMQTTClient.configureEndpoint(host, port)
    myAWSIoTMQTTClient.configureCredentials(rootCAPath, privateKeyPath, certificatePath)

# AWSIoTMQTTClient connection configuration
myAWSIoTMQTTClient.configureAutoReconnectBackoffTime(1, 32, 20)
myAWSIoTMQTTClient.configureOfflinePublishQueueing(-1)  # Infinite offline Publish queueing
myAWSIoTMQTTClient.configureDrainingFrequency(2)  # Draining: 2 Hz
myAWSIoTMQTTClient.configureConnectDisconnectTimeout(10)  # 10 sec
myAWSIoTMQTTClient.configureMQTTOperationTimeout(5)  # 5 sec

# Connect and subscribe to AWS IoT
myAWSIoTMQTTClient.connect()
if args.mode == 'both' or args.mode == 'subscribe':
    myAWSIoTMQTTClient.subscribe(topic, 1, customCallback)
time.sleep(2)


def read_dht11():
    print('Reading DHT11')
    humidity, temperature = Adafruit_DHT.read(DHT_TYPE, DHT_PIN)
    print('Humdity: %s Temperature: %s' % (humidity, temperature))

    if humidity is None or temperature is None:
        return humidity, temperature

    temperature = temperature * 9/5.0 + 32

    return humidity, temperature

# Publish to the same topic in a loop forever
loopCount = 0
while True:
    data = ((),)

    try:
        data = read_dht11()
    except Exception as e:
        print('Unexpected error when reading from dht11: %s\n' % (str(e)))

    if len(data) == 0:
        continue

    # Skip to the next reading if a valid measurement couldn't be taken.
    # This might happen if the CPU is under a lot of load and the sensor
    # can't be reliably read (timing is critical to read the sensor).
    if data[0] is None or data[1] is None:
        print("Humidity or temp were None - continuing...\n")
        time.sleep(2)
        continue

    if args.mode == 'both' or args.mode == 'publish':
        message = {}
        message['humidity'] = data[0]
        message['temperature'] = data[1]
        messageJson = json.dumps(message)
        myAWSIoTMQTTClient.publish(topic, messageJson, 1)
        if args.mode == 'publish':
            print('Published to topic %s: %s\n' % (topic, messageJson))
        loopCount += 1

    time.sleep(60)