brother hl cartridge replacement

how to reset Brother HL-series monochrome printers after changing ink cartridge

from https://www.inksaver.co.za

https://www.inksaver.co.za/en/blog/Reset-the-Toner-Life-End-Message-on-Your-Brother-Printer.php

>>>

So you’ve just replaced your Brother toner cartridge in your printer and the 'toner low' or 'replace toner' warning keeps popping up. You’ve tried everything. You’ve taken the toner cartridge out and checked everything is working and all the packaging has been removed. You’ve shaken the cartridge from side to side. You’ve even switched the printer on and off and nothing is making that irritating little message go away. There’s nothing in the user manual to tell you what to do. And worst of all, even though you know the toner cartridge is new, the printer still won’t let you print!
Brother toner cartridges

Relax. Most Brother toner printers need to be told you’ve replaced the toner cartridge. You’ll have to manually reset the counter and, luckily, this is fairly easy to do. We’ve put together a handy list of Brother toner printers and how to reset the toner count on them.

To reset the 'Toner Life End' / 'Replace Toner' message on Brother HL monochrome (black and white) printers:

    Open the front cover and leave it open while completing the following steps.
    Turn the printer off.
    Hold the ‘go’ button (or ‘start’ button) while turning the printer on. All panel lights should be on.
    Release the ‘go’ button (or ‘start’ button).
    Press the ‘go’ button (or ‘start’ button) 2 times.
    Pause. All panel lights should be on.
    Press the ‘go’ button (or ‘start’ button) 5 times. The toner light should be off (the error may be flashing). The paper light should be on or flashing.
    Close cover. The ready light should be the only light on.