Ruby Vagrant Setup

default.pp

# ----------
# Might look into https://github.com/blt04/puppet-rvm
# or https://github.com/jfryman/puppet-rvm
# or https://forge.puppetlabs.com/maestrodev/rvm
# ----------

Exec { path => [ "/bin/", "/sbin/" , "/usr/bin/", "/usr/sbin/" ] }

$as_vagrant = 'sudo -u vagrant -H bash -l -c'
$home = '/home/vagrant'

exec { 'apt-get -y update':
	unless => "test -e ${home}/.rvm"
}

#----- Basic development packages -----
package { 'curl':
	ensure => installed
}

package { 'git':
	ensure => installed
}

package { 'build-essential':
	ensure => installed
}

package { 'libyaml-dev':
	ensure => installed
}

#----- Ruby Development -----
exec { 'install-rvm':
	command => "${as_vagrant} 'curl -L https://get.rvm.io | bash -s stable'",
	creates => "${home}/.rvm",
	require => Package['curl']
}

exec { 'install-ruby':
	command => "${as_vagrant} '${home}/.rvm/bin/rvm install 2.0.0 --autolibs=enabled'",
	creates => "${home}/.rvm/bin/ruby",
	timeout => 600,
	require => [Package['libyaml-dev'], Exec['install-rvm']]
}

exec { 'set-default-ruby':
	command => "${as_vagrant} '${home}/.rvm/bin/rvm --fuzzy alias create default 2.0.0 && ${home}/.rvm/bin/rvm use default'",
	require => Exec['install-ruby']
}

exec { 'install-bundler':
	command => "${as_vagrant} gem install bundler --no-rdoc --no-ri",
	creates => "${home}/.rvm/bin/bundle",
	require => [Exec['set-default-ruby']]
}

Vagrant

# -*- mode: ruby -*-
# vi: set ft=ruby :

# Vagrantfile API/syntax version. Don't touch unless you know what you're doing!
VAGRANTFILE_API_VERSION = "2"

Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|
  # All Vagrant configuration is done here. The most common configuration
  # options are documented and commented below. For a complete reference,
  # please see the online documentation at vagrantup.com.

  # Every Vagrant virtual environment requires a box to build off of.
  config.vm.box = "precise32"

  # The url from where the 'config.vm.box' box will be fetched if it
  # doesn't already exist on the user's system.
  config.vm.box_url = "http://files.vagrantup.com/precise32.box"

  # Create a forwarded port mapping which allows access to a specific port
  # within the machine from a port on the host machine. In the example below,
  # accessing "localhost:8080" will access port 80 on the guest machine.
  config.vm.network :forwarded_port, guest: 8020, host: 8080

  # Create a private network, which allows host-only access to the machine
  # using a specific IP.
  config.vm.network :private_network, ip: "192.168.77.77"

  # Create a public network, which generally matched to bridged network.
  # Bridged networks make the machine appear as another physical device on
  # your network.
  # config.vm.network :public_network

  # If true, then any SSH connections made will enable agent forwarding.
  # Default value: false
  # config.ssh.forward_agent = true

  # Share an additional folder to the guest VM. The first argument is
  # the path on the host to the actual folder. The second argument is
  # the path on the guest to mount the folder. And the optional third
  # argument is a set of non-required options.
  config.vm.synced_folder "~/Documents/Development", "/development"

  # Provider-specific configuration so you can fine-tune various
  # backing providers for Vagrant. These expose provider-specific options.
  # Example for VirtualBox:
  #
  # config.vm.provider :virtualbox do |vb|
  #   # Don't boot with headless mode
  #   vb.gui = true
  #
  #   # Use VBoxManage to customize the VM. For example to change memory:
  #   vb.customize ["modifyvm", :id, "--memory", "1024"]
  # end
  #
  # View the documentation for the provider you're using for more
  # information on available options.

  # Enable provisioning with Puppet stand alone.  Puppet manifests
  # are contained in a directory path relative to this Vagrantfile.
  # You will need to create the manifests directory and a manifest in
  # the file precise32.pp in the manifests_path directory.
  #
  # An example Puppet manifest to provision the message of the day:
  #
  # # group { "puppet":
  # #   ensure => "present",
  # # }
  # #
  # # File { owner => 0, group => 0, mode => 0644 }
  # #
  # # file { '/etc/motd':
  # #   content => "Welcome to your Vagrant-built virtual machine!
  # #               Managed by Puppet.\n"
  # # }
  #
  config.vm.provision :puppet do |puppet|
    puppet.manifests_path = "puppet/manifests"
  end

  # Enable provisioning with chef solo, specifying a cookbooks path, roles
  # path, and data_bags path (all relative to this Vagrantfile), and adding
  # some recipes and/or roles.
  #
  # config.vm.provision :chef_solo do |chef|
  #   chef.cookbooks_path = "../my-recipes/cookbooks"
  #   chef.roles_path = "../my-recipes/roles"
  #   chef.data_bags_path = "../my-recipes/data_bags"
  #   chef.add_recipe "mysql"
  #   chef.add_role "web"
  #
  #   # You may also specify custom JSON attributes:
  #   chef.json = { :mysql_password => "foo" }
  # end

  # Enable provisioning with chef server, specifying the chef server URL,
  # and the path to the validation key (relative to this Vagrantfile).
  #
  # The Opscode Platform uses HTTPS. Substitute your organization for
  # ORGNAME in the URL and validation key.
  #
  # If you have your own Chef Server, use the appropriate URL, which may be
  # HTTP instead of HTTPS depending on your configuration. Also change the
  # validation key to validation.pem.
  #
  # config.vm.provision :chef_client do |chef|
  #   chef.chef_server_url = "https://api.opscode.com/organizations/ORGNAME"
  #   chef.validation_key_path = "ORGNAME-validator.pem"
  # end
  #
  # If you're using the Opscode platform, your validator client is
  # ORGNAME-validator, replacing ORGNAME with your organization name.
  #
  # If you have your own Chef Server, the default validation client name is
  # chef-validator, unless you changed the configuration.
  #
  #   chef.validation_client_name = "ORGNAME-validator"
end