kernel

bootmsg

dbbbit@ubuntu:~/red/linux-2.6.39$ ../lk-tester-maker/debug2_6.sh
rm: cannot remove 'arch/x86/boot/initrd.img-2.6.39': No such file or directory
[sudo] password for dbbbit:
W: plymouth: The plugin label.so is missing, the selected theme might not work as expected.
W: plymouth: You might want to install the plymouth-themes and plymouth-label package to fix this.
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
warning: TCG doesn't support requested feature: CPUID.01H:ECX.vmx [bit 5]
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39 (dbbbit@ubuntu) (gcc version 4.9.3 (Ubuntu 4.9.3-13ubuntu2) ) #7 SMP Mon Sep 18 23:08:53 CST 2017
[    0.000000] Command line: rw console=ttyS0 root=/dev/sda1 init=/bin/bash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffe0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.8 present.
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x3ffe0 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f6640] f6640
[    0.000000] init_memory_mapping: 0000000000000000-000000003ffe0000
[    0.000000] RAMDISK: 3dcfb000 - 3ffe0000
[    0.000000] ACPI: RSDP 00000000000f6460 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000003ffe16ee 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000003ffe0c14 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000003ffe0040 00BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 000000003ffe0000 00040
[    0.000000] ACPI: SSDT 000000003ffe0c88 009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000003ffe163e 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000003ffe16b6 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003ffe0000
[    0.000000] Initmem setup node 0 0000000000000000-000000003ffe0000
[    0.000000]   NODE_DATA [000000003dcf3000 - 000000003dcf7fff]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003ffe0
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000)
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88003da00000 s77184 r8192 d21120 u2097152
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258410
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: rw console=ttyS0 root=/dev/sda1 init=/bin/bash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 986972k/1048448k available (5335k kernel code, 452k absent, 61024k reserved, 3758k data, 636k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using HPET reference calibration
[    0.000000] Detected 2599.932 MHz processor.
[    0.014077] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.86 BogoMIPS (lpj=2599932)
[    0.016651] pid_max: default: 32768 minimum: 301
[    0.020742] Security Framework initialized
[    0.022142] SELinux:  Initializing.
[    0.025998] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.028445] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.030335] Mount-cache hash table entries: 256
[    0.039386] Initializing cgroup subsys ns
[    0.040300] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.041176] Initializing cgroup subsys cpuacct
[    0.042254] Initializing cgroup subsys freezer
[    0.044770] mce: CPU supports 10 MCE banks
[    0.046996] SMP alternatives: switching to UP code
[    0.129598] Freeing SMP alternatives: 12k freed
[    0.130358] ACPI: Core revision 20110316
[    0.156243] Setting APIC routing to flat
[    0.159983] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.170070] CPU0: AMD QEMU Virtual CPU version 2.5+ stepping 03
[    0.173982] APIC calibration not consistent with PM-Timer: 117ms instead of 100ms
[    0.173982] APIC delta adjusted to PM-Timer: 6250537 (7331007)
[    0.174753] Performance Events: Broken PMU hardware detected, using software events only.
[    0.181210] Brought up 1 CPUs
[    0.181647] Total of 1 processors activated (5199.86 BogoMIPS).
[    0.185980] devtmpfs: initialized
[    0.191818] kworker/u:0 used greatest stack depth: 6112 bytes left
[    0.196978] Time: 23:59:35  Date: 09/20/17
[    0.198607] NET: Registered protocol family 16
[    0.225471] ACPI: bus type pci registered
[    0.229214] PCI: Using configuration type 1 for base access
[    0.269968] kworker/u:0 used greatest stack depth: 5856 bytes left
[    0.387755] bio: create slab <bio-0> at 0
[    0.401675] ACPI: Interpreter enabled
[    0.402035] ACPI: (supports S0 S3 S4 S5)
[    0.406597] ACPI: Using IOAPIC for interrupt routing
[    0.504579] ACPI: No dock devices found.
[    0.505024] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.506932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.512822] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.514045] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.515054] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.516656] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff]
[    0.525187] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.526034] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.787885] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.790293] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.792984] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.795421] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.797224] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.803722] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.805047] vgaarb: loaded
[    0.808228] SCSI subsystem initialized
[    0.816884] usbcore: registered new interface driver usbfs
[    0.818805] usbcore: registered new interface driver hub
[    0.820655] usbcore: registered new device driver usb
[    0.837881] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.838070] PCI: Using ACPI for IRQ routing
[    0.856878] NetLabel: Initializing
[    0.856878] NetLabel:  domain hash size = 128
[    0.856946] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.858337] cfg80211: Calling CRDA to update world regulatory domain
[    0.860877] NetLabel:  unlabeled traffic allowed by default
[    0.861877] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.862216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.863412] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.876002] Switching to clocksource hpet
[    0.878650] Switched to NOHz mode on CPU #0
[    0.927339] pnp: PnP ACPI init
[    0.927915] ACPI: bus type pnp registered
[    0.974289] pnp: PnP ACPI: found 11 devices
[    0.976252] ACPI: ACPI bus type pnp unregistered
[    1.098070] NET: Registered protocol family 2
[    1.100093] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    1.108023] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    1.112339] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.115969] TCP: Hash tables configured (established 131072 bind 65536)
[    1.118491] TCP reno registered
[    1.119074] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.120849] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.124490] NET: Registered protocol family 1
[    1.130991] RPC: Registered udp transport module.
[    1.132054] RPC: Registered tcp transport module.
[    1.132732] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.134424] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.135707] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.136982] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.140153] Trying to unpack rootfs image as initramfs...
[    4.209603] Freeing initrd memory: 35732k freed
[    4.358160] microcode: CPU0: family 6 not supported
[    4.364151] audit: initializing netlink socket (disabled)
[    4.365699] type=2000 audit(1505951979.364:1): initialized
[    4.464759] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.519377] VFS: Disk quotas dquot_6.5.2
[    4.523094] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.536245] msgmni has been set to 1997
[    4.549035] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.551327] io scheduler noop registered
[    4.551895] io scheduler deadline registered
[    4.554155] io scheduler cfq registered (default)
[    4.561627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.564431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    4.579709] ACPI: Power Button [PWRF]
[    4.616556] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�[    4.893546] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.925624] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    4.935894] Non-volatile memory driver v1.3
[    4.937411] Linux agpgart interface v0.103
[    4.945586] [drm] Initialized drm 1.1.0 20060810
[    4.946583] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[    5.016923] brd: module loaded
[    5.041501] loop: module loaded
[    5.080077] scsi0 : ata_piix
[    5.083542] scsi1 : ata_piix
[    5.098775] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14
[    5.100792] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15
[    5.112927] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    5.114522] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    5.131971] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    5.134556] e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[    5.452438] Refined TSC clocksource calibration: 2599.955 MHz.
[    5.453918] Switching to clocksource tsc
[    5.457004] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    5.459736] ata2.00: configured for MWDMA2
[    5.462604] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[    5.463852] ata1.00: 411648 sectors, multi 16: LBA48
[    5.465399] ata1.00: configured for MWDMA2
[    5.485850] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
[    5.499249] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    5.500735] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[    5.514240] sd 0:0:0:0: [sda] 411648 512-byte logical blocks: (210 MB/201 MiB)
[    5.526169] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    5.527977] e100: Copyright(c) 1999-2006 Intel Corporation
[    5.530048] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.533204] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    5.544171] sd 0:0:0:0: [sda] Write Protect is off
[    5.546656] sky2: driver version 1.28
[    5.548319] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.568520] sda: detected capacity change from 0 to 210763776
[    5.581203]  sda: sda1
[    5.599682] console [netcon0] enabled
[    5.601250] netconsole: network logging started
[    5.604679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.615918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.631939] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    5.633605] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.635861] uhci_hcd: USB Universal Host Controller Interface driver
[    5.640166] usbcore: registered new interface driver usblp
[    5.642390] Initializing USB Mass Storage driver...
[    5.670031] usbcore: registered new interface driver usb-storage
[    5.671925] USB Mass Storage support registered.
[    5.674750] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.680185] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.682041] usbcore: registered new interface driver libusual
[    5.698249] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.703638] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.705518] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.714812] mousedev: PS/2 mouse device common for all mice
[    5.733963] rtc_cmos 00:01: RTC can wake from S4
[    5.738386] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    5.741315] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    5.768156] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[    5.771847] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.781797] cpuidle: using governor ladder
[    5.782842] cpuidle: using governor menu
[    5.794541] EFI Variables Facility v0.08 2004-May-17
[    5.840782] usbcore: registered new interface driver usbhid
[    5.845601] usbhid: USB HID core driver
[    5.976383] modprobe used greatest stack depth: 5720 bytes left
[    5.987681] ALSA device list:
[    5.987879]   No soundcards found.
[    5.990139] Netfilter messages via NETLINK v0.30.
[    5.992905] nf_conntrack version 0.5.0 (7989 buckets, 31956 max)
[    5.998349] ctnetlink v0.93: registering with nfnetlink.
[    6.010009] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    6.016399] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.034198] TCP cubic registered
[    6.034208] Initializing XFRM netlink socket
[    6.040310] NET: Registered protocol family 10
[    6.071979] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.080098] IPv6 over IPv4 tunneling driver
[    6.082484] sit0: Features changed: 0x00007800 -> 0x00007000
[    6.101202] NET: Registered protocol family 17
[    6.103124] Registering the dns_resolver key type
[    6.115781] registered taskstats version 1
[    6.117450]   Magic number: 1:406:1010
[    6.167728] Freeing unused kernel memory: 636k freed
[    6.260197] Write protecting the kernel read-only data: 8192k
[    6.290614] Freeing unused kernel memory: 788k freed
[    6.295703] Freeing unused kernel memory: 4k freed
Loading, please wait...
[    6.637021] all_generic_ide used greatest stack depth: 5656 bytes left
starting version 229
[    8.044513] ata_id used greatest stack depth: 5600 bytes left
[   10.204170] systemd-udevd used greatest stack depth: 5208 bytes left
[   10.210131] systemd-udevd used greatest stack depth: 5040 bytes left
[   10.214512] systemd-udevd used greatest stack depth: 5032 bytes left
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
main-loop: WARNING: I/O thread spun for 1000 iterations
Begin: Will now check root file system ... fsck from util-linux 2.27.1
fsck: error 2 (No such file or directory) while executing fsck.ext3 for /dev/sda1
fsck exited with status code 8
done.
Warning: File system check failed but did not detect errors
[   24.881092] hrtimer: interrupt took 2520335 ns
[   24.890344] EXT3-fs: barriers not enabled
[   25.029596] kjournald starting.  Commit interval 5 seconds
[   25.036194] EXT3-fs (sda1): using internal journal
[   25.037435] EXT3-fs (sda1): recovery complete
[   25.040117] EXT3-fs (sda1): mounted filesystem with writeback data mode
[   25.054370] exe used greatest stack depth: 4952 bytes left
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: debug is busted
Warning: Something odd, no /lib/modules/2.6.39 in initramfs.
done.
mount: mounting /run on /root/run failed: No such file or directory
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
bash-4.3#