Ron Evans deadprogram

First go to the Gobot Intel Edison Readme (https://github.com/hybridgroup/gobot/tree/master/platforms/intel-iot/edison#how-to-install) and follow the getting started guide. Your Edison has already been updated to the latest firmware version,
so you can skip that part! You will not need to download the Intel XDK, you only need to go through the steps detailing how to connect through the serial interface and then configure your edison.

Find the box called "Base Shield" and open that up and place the grove "Base Shield" onto your Intel Edison. This will allow you to use the Grove connectors shields and cables!

####Installation instructions

You will need node.js as well as satisfying the dependencies listed here
Once you have the required dependencies met, you can install the required node modules with
$ npm install cylon cylon-gpio cylon-i2c cylon-firmata cylon-sphero cylon-leapmotion
Install the leap motion software (and SDK too if you want, but the SDK is not needed for cylon.js)

####Arduino blink

//blink.js
var Cylon = require('cylon');

	package main

	import (
	"crypto/tls"
	"crypto/x509"
	"flag"
	"fmt"
	"io/ioutil"
	"log"
	"time"

	"""
	Utilities for dumping STM32 peripheral registers with tab-completion
	Based on a script by vampi-the-frog

	Dependencies:
	pip install -U cmsis-svd

	Usage (inside gdb):

	(gdb) source /path/to/svd-dump.py

	package main

	import (
	"fmt"
	"io/ioutil"
	"net/http"
	"runtime"
	"time"

	"gocv.io/x/gocv"

	package main

	import (
	"time"

	"github.com/hybridgroup/gobot"
	"github.com/hybridgroup/gobot/platforms/firmata"
	"github.com/hybridgroup/gobot/platforms/gpio"
	)

	#!/bin/bash

	#
	# run this script on your linux host computer to connect to the bbb and forward your internet.
	# be sure to replace "enp0s20u1" with the appropriate usb device for your bbb, which can be found
	# by doing an "ifconfig" on your host computer.
	#

	sudo -- sh -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
	sudo iptables -A POSTROUTING -t nat -j MASQUERADE

	var Cylon = require('cylon');

	Cylon.api({
	host: '0.0.0.0',
	port: '7000',
	ssl: false
	});

	Cylon.robot({
	name: 'drenerdo',

	var Cylon = require('cylon');

	Cylon.robot({
	connection: { name: 'sphero', adaptor: 'sphero', port: '/dev/tty.Sphero-YBW-RN-SPP' },
	device: { name: 'sphero', driver: 'sphero' },

	setColor: function(color) {
	my.sphero.setColor(color);
	},

	/*
	* Firmata is a generic protocol for communicating with microcontrollers
	* from software on a host computer. It is intended to work with
	* any host computer software package.
	*
	* To download a host software package, please clink on the following link
	* to open the download page in your default browser.
	*
	* http://firmata.org/wiki/Download
	*/