VS Code Settings

settings.json

  // Controls the font size in pixels.
  "editor.fontSize": 12,

  // Controls auto save of dirty files. Accepted values:  'off', 'afterDelay', 'onFocusChange' (editor loses focus), 'onWindowChange' (window loses focus). If set to 'afterDelay', you can configure the delay in 'files.autoSaveDelay'.
  "files.autoSave": "off",

  // Controls the font family.
  "editor.fontFamily": "Menlo, Monaco, 'Courier New', monospace",

  // The number of spaces a tab is equal to. This setting is overriden based on the file contents when `editor.detectIndentation` is on.
  "editor.tabSize": 4,

  // Controls how the editor should render whitespace characters, possibilities are 'none', 'boundary', and 'all'. The 'boundary' option does not render single spaces between words.
  "editor.renderWhitespace": "none",

  // Configure glob patterns for excluding files and folders.
  "files.exclude": {
    "**/.git": true,
    "**/.svn": true,
    "**/.hg": true,
    "**/CVS": true,
    "**/.DS_Store": true
  },

  // Controls the cursor style, accepted values are 'block', 'block-outline', 'line', 'line-thin', 'underline' and 'underline-thin'
  "editor.cursorStyle": "line",

  // Insert spaces when pressing Tab. This setting is overriden based on the file contents when `editor.detectIndentation` is on.
  "editor.insertSpaces": true,

  // Controls how lines should wrap. Can be:
  //  - 'off' (disable wrapping),
  //  - 'on' (viewport wrapping),
  //  - 'wordWrapColumn' (wrap at `editor.wordWrapColumn`) or
  //  - 'bounded' (wrap at minimum of viewport and `editor.wordWrapColumn`).
  "editor.wordWrap": "off",

  // Configure file associations to languages (e.g. "*.extension": "html"). These have precedence over the default associations of the languages installed.
  "files.associations": {}

}
,
{


  // Insert snippets when their prefix matches. Works best when 'quickSuggestions' aren't enabled.
  "editor.tabCompletion": false,

  // Controls the font family.
  "editor.fontFamily": "Menlo, Monaco, 'Courier New', monospace",

  // Controls the font weight.
  "editor.fontWeight": "normal",

  // Controls the font size in pixels.
  "editor.fontSize": 12,

  // Controls the line height. Use 0 to compute the lineHeight from the fontSize.
  "editor.lineHeight": 0,

  // Controls the display of line numbers. Possible values are 'on', 'off', and 'relative'. 'relative' shows the line count from the current cursor position.
  "editor.lineNumbers": "on",

  // Columns at which to show vertical rulers
  "editor.rulers": [],

  // Characters that will be used as word separators when doing word related navigations or operations
  "editor.wordSeparators": "`~!@#$%^&*()-=+[{]}\\|;:'\",.<>/?",

  // The number of spaces a tab is equal to. This setting is overriden based on the file contents when `editor.detectIndentation` is on.
  "editor.tabSize": 4,

  // Insert spaces when pressing Tab. This setting is overriden based on the file contents when `editor.detectIndentation` is on.
  "editor.insertSpaces": true,

  // When opening a file, `editor.tabSize` and `editor.insertSpaces` will be detected based on the file contents.
  "editor.detectIndentation": true,

  // Controls if selections have rounded corners
  "editor.roundedSelection": true,

  // Controls if the editor will scroll beyond the last line
  "editor.scrollBeyondLastLine": true,

  // Controls if the minimap is shown
  "editor.minimap.enabled": false,

  // Render the actual characters on a line (as opposed to color blocks)
  "editor.minimap.renderCharacters": true,

  // Limit the width of the minimap to render at most a certain number of columns
  "editor.minimap.maxColumn": 120,

  // Controls how lines should wrap. Can be:
  //  - 'off' (disable wrapping),
  //  - 'on' (viewport wrapping),
  //  - 'wordWrapColumn' (wrap at `editor.wordWrapColumn`) or
  //  - 'bounded' (wrap at minimum of viewport and `editor.wordWrapColumn`).
  "editor.wordWrap": "off",

  // Controls the wrapping column of the editor when `editor.wordWrap` is 'wordWrapColumn' or 'bounded'.
  "editor.wordWrapColumn": 80,

  // Controls the indentation of wrapped lines. Can be one of 'none', 'same' or 'indent'.
  "editor.wrappingIndent": "same",

  // A multiplier to be used on the `deltaX` and `deltaY` of mouse wheel scroll events
  "editor.mouseWheelScrollSensitivity": 1,

  // Controls if suggestions should automatically show up while typing
  "editor.quickSuggestions": {
    "other": true,
    "comments": false,
    "strings": false
  },

  // Controls the delay in ms after which quick suggestions will show up
  "editor.quickSuggestionsDelay": 10,

  // Enables parameter hints
  "editor.parameterHints": true,

  // Controls if the editor should automatically close brackets after opening them
  "editor.autoClosingBrackets": true,

  // Controls if the editor should automatically format the line after typing
  "editor.formatOnType": false,

  // Controls if the editor should automatically format the pasted content. A formatter must be available and the formatter should be able to format a range in a document.
  "editor.formatOnPaste": false,

  // Controls if suggestions should automatically show up when typing trigger characters
  "editor.suggestOnTriggerCharacters": true,

  // Controls if suggestions should be accepted on 'Enter' - in addition to 'Tab'. Helps to avoid ambiguity between inserting new lines or accepting suggestions.
  "editor.acceptSuggestionOnEnter": true,

  // Controls if suggestions should be accepted on commit characters. For instance in JavaScript the semi-colon (';') can be a commit character that accepts a suggestion and types that character.
  "editor.acceptSuggestionOnCommitCharacter": true,

  // Controls whether snippets are shown with other suggestions and how they are sorted.
  "editor.snippetSuggestions": "bottom",

  // Controls whether copying without a selection copies the current line.
  "editor.emptySelectionClipboard": true,

  // Controls whether completions should be computed based on words in the document.
  "editor.wordBasedSuggestions": true,

  // Font size for the suggest widget
  "editor.suggestFontSize": 0,

  // Line height for the suggest widget
  "editor.suggestLineHeight": 0,

  // Controls whether the editor should highlight similar matches to the selection
  "editor.selectionHighlight": true,

  // Controls whether the editor should highlight semantic symbol occurrences
  "editor.occurrencesHighlight": true,

  // Controls the number of decorations that can show up at the same position in the overview ruler
  "editor.overviewRulerLanes": 3,

  // Controls if a border should be drawn around the overview ruler.
  "editor.overviewRulerBorder": true,

  // Control the cursor animation style, possible values are 'blink', 'smooth', 'phase', 'expand' and 'solid'
  "editor.cursorBlinking": "blink",

  // Zoom the font of the editor when using mouse wheel and holding Ctrl
  "editor.mouseWheelZoom": false,

  // Controls the cursor style, accepted values are 'block', 'block-outline', 'line', 'line-thin', 'underline' and 'underline-thin'
  "editor.cursorStyle": "line",

  // Enables font ligatures
  "editor.fontLigatures": false,

  // Controls if the cursor should be hidden in the overview ruler.
  "editor.hideCursorInOverviewRuler": false,

  // Controls how the editor should render whitespace characters, possibilities are 'none', 'boundary', and 'all'. The 'boundary' option does not render single spaces between words.
  "editor.renderWhitespace": "none",

  // Controls whether the editor should render control characters
  "editor.renderControlCharacters": false,

  // Controls whether the editor should render indent guides
  "editor.renderIndentGuides": false,

  // Controls how the editor should render the current line highlight, possibilities are 'none', 'gutter', 'line', and 'all'.
  "editor.renderLineHighlight": "line",

  // Controls if the editor shows code lenses
  "editor.codeLens": true,

  // Controls whether the editor has code folding enabled
  "editor.folding": true,

  // Highlight matching brackets when one of them is selected.
  "editor.matchBrackets": true,

  // Controls whether the editor should render the vertical glyph margin. Glyph margin is mostly used for debugging.
  "editor.glyphMargin": true,

  // Inserting and deleting whitespace follows tab stops
  "editor.useTabStops": true,

  // Remove trailing auto inserted whitespace
  "editor.trimAutoWhitespace": true,

  // Keep peek editors open even when double clicking their content or when hitting Escape.
  "editor.stablePeek": false,

  // Controls if the editor should allow to move selections via drag and drop.
  "editor.dragAndDrop": false,

  // Controls if the diff editor shows the diff side by side or inline
  "diffEditor.renderSideBySide": true,

  // Controls if the diff editor shows changes in leading or trailing whitespace as diffs
  "diffEditor.ignoreTrimWhitespace": true,

  // Controls if the diff editor shows +/- indicators for added/removed changes
  "diffEditor.renderIndicators": true,

  // Format a file on save. A formatter must be available, the file must not be auto-saved, and editor must not be shutting down.
  "editor.formatOnSave": false,


  // When enabled, emmet abbreviations are expanded when pressing TAB.
  "emmet.triggerExpansionOnTab": true,

  // Preferences used to modify behavior of some actions and resolvers of Emmet.
  "emmet.preferences": {},

  // Define profile for specified syntax or use your own profile with specific rules.
  "emmet.syntaxProfiles": {},

  // An array of languages where emmet abbreviations should not be expanded.
  "emmet.excludeLanguages": [
    "markdown"
  ],

  // Path to a folder containing emmet profiles, snippets and preferences
  "emmet.extensionsPath": null,


  // When enabled, will show the Welcome page on startup.
  "workbench.welcome.enabled": false,

  // When enabled, will show the watermark tips when no editor is open.
  "workbench.tips.enabled": true,

  // Controls if opened editors should show in tabs or not.
  "workbench.editor.showTabs": true,

  // Controls the position of the editor's tabs close buttons or disables them when set to 'off'.
  "workbench.editor.tabCloseButton": "right",

  // Controls if opened editors should show with an icon or not. This requires an icon theme to be enabled as well.
  "workbench.editor.showIcons": true,

  // Controls if opened editors show as preview. Preview editors are reused until they are kept (e.g. via double click or editing).
  "workbench.editor.enablePreview": true,

  // Controls if opened editors from Quick Open show as preview. Preview editors are reused until they are kept (e.g. via double click or editing).
  "workbench.editor.enablePreviewFromQuickOpen": true,

  // Controls where editors open. Select 'left' or 'right' to open editors to the left or right of the current active one. Select 'first' or 'last' to open editors independently from the currently active one.
  "workbench.editor.openPositioning": "right",

  // Controls if an editor is revealed in any of the visible groups if opened. If disabled, an editor will prefer to open in the currently active editor group. If enabled, an already opened editor will be revealed instead of opened again in the currently active editor group. Note that there are some cases where this setting is ignored, e.g. when forcing an editor to open in a specific group or to the side of the currently active group.
  "workbench.editor.revealIfOpen": false,

  // Controls if Quick Open should close automatically once it loses focus.
  "workbench.quickOpen.closeOnFocusLost": true,

  // Controls if opening settings also opens an editor showing all default settings.
  "workbench.settings.openDefaultSettings": true,

  // Controls the location of the sidebar. It can either show on the left or right of the workbench.
  "workbench.sideBar.location": "left",

  // Controls the visibility of the status bar at the bottom of the workbench.
  "workbench.statusBar.visible": true,

  // Controls the visibility of the activity bar in the workbench.
  "workbench.activityBar.visible": true,

  // Controls if editors showing a file should close automatically when the file is deleted or renamed by some other process. Disabling this will keep the editor open as dirty on such an event. Note that deleting from within the application will always close the editor and that dirty files will never close to preserve your data.
  "workbench.editor.closeOnFileDelete": true,

  // Navigate between open files using three-finger swipe horizontally.
  "workbench.editor.swipeToNavigate": false,

  // Specifies the color theme used in the workbench.
  "workbench.colorTheme": "Default Dark+",

  // Specifies the icon theme used in the workbench.
  "workbench.iconTheme": null,

  // Overrides colors from the currently selected color theme.
  "workbench.colorCustomizations": {},


  // Controls if files should open in a new window.
  // - default: files will open in the window with the files' folder open or the last active window unless opened via the dock or from finder (macOS only)
  // - on: files will open in a new window
  // - off: files will open in the window with the files' folder open or the last active window
  // Note that there can still be cases where this setting is ignored (e.g. when using the -new-window or -reuse-window command line option).
  "window.openFilesInNewWindow": "default",

  // Controls if folders should open in a new window or replace the last active window.
  // - default: folders will open in a new window unless a folder is picked from within the application (e.g. via the File menu)
  // - on: folders will open in a new window
  // - off: folders will replace the last active window
  // Note that there can still be cases where this setting is ignored (e.g. when using the -new-window or -reuse-window command line option).
  "window.openFoldersInNewWindow": "default",

  // Controls how folders are being reopened after a restart. Select 'none' to never reopen a folder, 'one' to reopen the last folder you worked on or 'all' to reopen all folders of your last session.
  "window.reopenFolders": "one",

  // Controls if a window should restore to full screen mode if it was exited in full screen mode.
  "window.restoreFullscreen": false,

  // Adjust the zoom level of the window. The original size is 0 and each increment above (e.g. 1) or below (e.g. -1) represents zooming 20% larger or smaller. You can also enter decimals to adjust the zoom level with a finer granularity.
  "window.zoomLevel": 0,

  // Controls the window title based on the active editor. Variables are substituted based on the context:
  // ${activeEditorShort}: e.g. myFile.txt
  // ${activeEditorMedium}: e.g. myFolder/myFile.txt
  // ${activeEditorLong}: e.g. /Users/Development/myProject/myFolder/myFile.txt
  // ${rootName}: e.g. myProject
  // ${rootPath}: e.g. /Users/Development/myProject
  // ${appName}: e.g. VS Code
  // ${dirty}: a dirty indicator if the active editor is dirty
  // ${separator}: a conditional separator (" - ") that only shows when surrounded by variables with values
  "window.title": "${activeEditorShort}${separator}${rootName}",

  // Controls the dimensions of opening a new window. By default, a new window will open in the center of the screen with small dimensions. When set to  'inherit', the window will get the same dimensions as the last active one. When set to 'maximized', the window will open maximized and fullscreen if configured to 'fullscreen'.
  "window.newWindowDimensions": "default",

  // Adjust the appearance of the window title bar. Changes require a full restart to apply.
  "window.titleBarStyle": "custom",

  // Enables macOS Sierra window tabs. Note that changes require a full restart to apply and that native tabs will disable a custom title bar style if configured.
  "window.nativeTabs": false,


  // Configure glob patterns for excluding files and folders.
  "files.exclude": {
    "**/.git": true,
    "**/.svn": true,
    "**/.hg": true,
    "**/CVS": true,
    "**/.DS_Store": true
  },

  // Configure file associations to languages (e.g. "*.extension": "html"). These have precedence over the default associations of the languages installed.
  "files.associations": {},

  // The default character set encoding to use when reading and writing files.
  "files.encoding": "utf8",

  // When enabled, will attempt to guess the character set encoding when opening files
  "files.autoGuessEncoding": false,

  // The default end of line character.
  "files.eol": "\n",

  // When enabled, will trim trailing whitespace when saving a file.
  "files.trimTrailingWhitespace": false,

  // When enabled, insert a final new line at the end of the file when saving it.
  "files.insertFinalNewline": false,

  // Controls auto save of dirty files. Accepted values:  'off', 'afterDelay', 'onFocusChange' (editor loses focus), 'onWindowChange' (window loses focus). If set to 'afterDelay', you can configure the delay in 'files.autoSaveDelay'.
  "files.autoSave": "off",

  // Controls the delay in ms after which a dirty file is saved automatically. Only applies when 'files.autoSave' is set to 'afterDelay'
  "files.autoSaveDelay": 1000,

  // Configure glob patterns of file paths to exclude from file watching. Changing this setting requires a restart. When you experience Code consuming lots of cpu time on startup, you can exclude large folders to reduce the initial load.
  "files.watcherExclude": {
    "**/.git/objects/**": true,
    "**/node_modules/**": true
  },

  // Controls whether unsaved files are remembered between sessions, allowing the save prompt when exiting the editor to be skipped.
  "files.hotExit": "onExit",

  // The default language mode that is assigned to new files.
  "files.defaultLanguage": "",


  // Controls if turning on Zen Mode also puts the workbench into full screen mode.
  "zenMode.fullScreen": true,

  // Controls if turning on Zen Mode also hides workbench tabs.
  "zenMode.hideTabs": true,

  // Controls if turning on Zen Mode also hides the status bar at the bottom of the workbench.
  "zenMode.hideStatusBar": true,

  // Controls if turning on Zen Mode also hides the activity bar at the left of the workbench.
  "zenMode.hideActivityBar": true,

  // Controls if a window should restore to zen mode if it was exited in zen mode.
  "zenMode.restore": false,


  // Number of editors shown in the Open Editors pane. Set it to 0 to hide the pane.
  "explorer.openEditors.visible": 9,

  // Controls if the height of the open editors section should adapt dynamically to the number of elements or not.
  "explorer.openEditors.dynamicHeight": true,

  // Controls if the explorer should automatically reveal and select files when opening them.
  "explorer.autoReveal": true,

  // Controls if the explorer should allow to move files and folders via drag and drop.
  "explorer.enableDragAndDrop": true,


  // Configure glob patterns for excluding files and folders in searches. Inherits all glob patterns from the files.exclude setting.
  "search.exclude": {
    "**/node_modules": true,
    "**/bower_components": true
  },

  // Controls whether to use ripgrep in text search
  "search.useRipgrep": true,

  // Controls whether to use .gitignore and .ignore files by default when searching in a new workspace.
  "search.useIgnoreFilesByDefault": false,

  // Configure to include results from a global symbol search in the file results for Quick Open.
  "search.quickOpen.includeSymbols": false,


  // The proxy setting to use. If not set will be taken from the http_proxy and https_proxy environment variables
  "http.proxy": "",

  // Whether the proxy server certificate should be verified against the list of supplied CAs.
  "http.proxyStrictSSL": true,

  // The value to send as the 'Proxy-Authorization' header for every network request.
  "http.proxyAuthorization": null,


  // Controls the dispatching logic for key presses to use either `keydown.code` (recommended) or `keydown.keyCode`.
  "keyboard.dispatch": "code",


  // Configure whether you receive automatic updates from an update channel. Requires a restart after change.
  "update.channel": "default",


  // Controls CSS validation and problem severities.
  // Enables or disables all validations
  "css.validate": true,

  // Enables or disables color decorators
  "css.colorDecorators.enable": true,

  // When using a vendor-specific prefix make sure to also include all other vendor-specific properties
  "css.lint.compatibleVendorPrefixes": "ignore",

  // When using a vendor-specific prefix also include the standard property
  "css.lint.vendorPrefix": "warning",

  // Do not use duplicate style definitions
  "css.lint.duplicateProperties": "ignore",

  // Do not use empty rulesets
  "css.lint.emptyRules": "warning",

  // Import statements do not load in parallel
  "css.lint.importStatement": "ignore",

  // Do not use width or height when using padding or border
  "css.lint.boxModel": "ignore",

  // The universal selector (*) is known to be slow
  "css.lint.universalSelector": "ignore",

  // No unit for zero needed
  "css.lint.zeroUnits": "ignore",

  // @font-face rule must define 'src' and 'font-family' properties
  "css.lint.fontFaceProperties": "warning",

  // Hex colors must consist of three or six hex numbers
  "css.lint.hexColorLength": "error",

  // Invalid number of parameters
  "css.lint.argumentsInColorFunction": "error",

  // Unknown property.
  "css.lint.unknownProperties": "warning",

  // IE hacks are only necessary when supporting IE7 and older
  "css.lint.ieHack": "ignore",

  // Unknown vendor specific property.
  "css.lint.unknownVendorSpecificProperties": "ignore",

  // Property is ignored due to the display. E.g. with 'display: inline', the width, height, margin-top, margin-bottom, and float properties have no effect
  "css.lint.propertyIgnoredDueToDisplay": "warning",

  // Avoid using !important. It is an indication that the specificity of the entire CSS has gotten out of control and needs to be refactored.
  "css.lint.important": "ignore",

  // Avoid using 'float'. Floats lead to fragile CSS that is easy to break if one aspect of the layout changes.
  "css.lint.float": "ignore",

  // Selectors should not contain IDs because these rules are too tightly coupled with the HTML.
  "css.lint.idSelector": "ignore",

  // Traces the communication between VS Code and the CSS language server.
  "css.trace.server": "off",


  // Controls SCSS validation and problem severities.
  // Enables or disables all validations
  "scss.validate": true,

  // Enables or disables color decorators
  "scss.colorDecorators.enable": true,

  // When using a vendor-specific prefix make sure to also include all other vendor-specific properties
  "scss.lint.compatibleVendorPrefixes": "ignore",

  // When using a vendor-specific prefix also include the standard property
  "scss.lint.vendorPrefix": "warning",

  // Do not use duplicate style definitions
  "scss.lint.duplicateProperties": "ignore",

  // Do not use empty rulesets
  "scss.lint.emptyRules": "warning",

  // Import statements do not load in parallel
  "scss.lint.importStatement": "ignore",

  // Do not use width or height when using padding or border
  "scss.lint.boxModel": "ignore",

  // The universal selector (*) is known to be slow
  "scss.lint.universalSelector": "ignore",

  // No unit for zero needed
  "scss.lint.zeroUnits": "ignore",

  // @font-face rule must define 'src' and 'font-family' properties
  "scss.lint.fontFaceProperties": "warning",

  // Hex colors must consist of three or six hex numbers
  "scss.lint.hexColorLength": "error",

  // Invalid number of parameters
  "scss.lint.argumentsInColorFunction": "error",

  // Unknown property.
  "scss.lint.unknownProperties": "warning",

  // IE hacks are only necessary when supporting IE7 and older
  "scss.lint.ieHack": "ignore",

  // Unknown vendor specific property.
  "scss.lint.unknownVendorSpecificProperties": "ignore",

  // Property is ignored due to the display. E.g. with 'display: inline', the width, height, margin-top, margin-bottom, and float properties have no effect
  "scss.lint.propertyIgnoredDueToDisplay": "warning",

  // Avoid using !important. It is an indication that the specificity of the entire CSS has gotten out of control and needs to be refactored.
  "scss.lint.important": "ignore",

  // Avoid using 'float'. Floats lead to fragile CSS that is easy to break if one aspect of the layout changes.
  "scss.lint.float": "ignore",

  // Selectors should not contain IDs because these rules are too tightly coupled with the HTML.
  "scss.lint.idSelector": "ignore",


  // Controls LESS validation and problem severities.
  // Enables or disables all validations
  "less.validate": true,

  // Enables or disables color decorators
  "less.colorDecorators.enable": true,

  // When using a vendor-specific prefix make sure to also include all other vendor-specific properties
  "less.lint.compatibleVendorPrefixes": "ignore",

  // When using a vendor-specific prefix also include the standard property
  "less.lint.vendorPrefix": "warning",

  // Do not use duplicate style definitions
  "less.lint.duplicateProperties": "ignore",

  // Do not use empty rulesets
  "less.lint.emptyRules": "warning",

  // Import statements do not load in parallel
  "less.lint.importStatement": "ignore",

  // Do not use width or height when using padding or border
  "less.lint.boxModel": "ignore",

  // The universal selector (*) is known to be slow
  "less.lint.universalSelector": "ignore",

  // No unit for zero needed
  "less.lint.zeroUnits": "ignore",

  // @font-face rule must define 'src' and 'font-family' properties
  "less.lint.fontFaceProperties": "warning",

  // Hex colors must consist of three or six hex numbers
  "less.lint.hexColorLength": "error",

  // Invalid number of parameters
  "less.lint.argumentsInColorFunction": "error",

  // Unknown property.
  "less.lint.unknownProperties": "warning",

  // IE hacks are only necessary when supporting IE7 and older
  "less.lint.ieHack": "ignore",

  // Unknown vendor specific property.
  "less.lint.unknownVendorSpecificProperties": "ignore",

  // Property is ignored due to the display. E.g. with 'display: inline', the width, height, margin-top, margin-bottom, and float properties have no effect
  "less.lint.propertyIgnoredDueToDisplay": "warning",

  // Avoid using !important. It is an indication that the specificity of the entire CSS has gotten out of control and needs to be refactored.
  "less.lint.important": "ignore",

  // Avoid using 'float'. Floats lead to fragile CSS that is easy to break if one aspect of the layout changes.
  "less.lint.float": "ignore",

  // Selectors should not contain IDs because these rules are too tightly coupled with the HTML.
  "less.lint.idSelector": "ignore",


  // Allows setting breakpoint in any file
  "debug.allowBreakpointsEverywhere": false,

  // Automatically open explorer view on the end of a debug session
  "debug.openExplorerOnEnd": false,

  // Show variable values inline in editor while debugging
  "debug.inlineValues": false,

  // Controls if the floating debug action bar should be hidden
  "debug.hideActionBar": false,

  // Global debug launch configuration. Should be used as an alternative to 'launch.json' that is shared across workspaces
  "launch": {},


  // Enable/disable default HTML formatter (requires restart)
  "html.format.enable": true,

  // Maximum amount of characters per line (0 = disable).
  "html.format.wrapLineLength": 120,

  // List of tags, comma separated, that shouldn't be reformatted. 'null' defaults to all tags listed at https://www.w3.org/TR/html5/dom.html#phrasing-content.
  "html.format.unformatted": "a, abbr, acronym, b, bdo, big, br, button, cite, code, dfn, em, i, img, input, kbd, label, map, object, q, samp, select, small, span, strong, sub, sup, textarea, tt, var",

  // List of tags, comma separated, where the content shouldn't be reformatted. 'null' defaults to the 'pre' tag.
  "html.format.contentUnformatted": "pre",

  // Indent <head> and <body> sections.
  "html.format.indentInnerHtml": false,

  // Whether existing line breaks before elements should be preserved. Only works before elements, not inside tags or for text.
  "html.format.preserveNewLines": true,

  // Maximum number of line breaks to be preserved in one chunk. Use 'null' for unlimited.
  "html.format.maxPreserveNewLines": null,

  // Format and indent {{#foo}} and {{/foo}}.
  "html.format.indentHandlebars": false,

  // End with a newline.
  "html.format.endWithNewline": false,

  // List of tags, comma separated, that should have an extra newline before them. 'null' defaults to "head, body, /html".
  "html.format.extraLiners": "head, body, /html",

  // Wrap attributes.
  "html.format.wrapAttributes": "auto",

  // Configures if the built-in HTML language support suggests Angular V1 tags and properties.
  "html.suggest.angular1": true,

  // Configures if the built-in HTML language support suggests Ionic tags, properties and values.
  "html.suggest.ionic": true,

  // Configures if the built-in HTML language support suggests HTML5 tags, properties and values.
  "html.suggest.html5": true,

  // Configures if the built-in HTML language support validates embedded scripts.
  "html.validate.scripts": true,

  // Configures if the built-in HTML language support validates embedded styles.
  "html.validate.styles": true,

  // Traces the communication between VS Code and the HTML language server.
  "html.trace.server": "off",


  // Associate schemas to JSON files in the current project
  "json.schemas": [],

  // Enable/disable default JSON formatter (requires restart)
  "json.format.enable": true,

  // Traces the communication between VS Code and the JSON language server.
  "json.trace.server": "off",

  // Enables or disables color decorators
  "json.colorDecorators.enable": true,


  // A list of URLs or local paths to CSS style sheets to use from the markdown preview. Relative paths are interpreted relative to the folder open in the explorer. If there is no open folder, they are interpreted relative to the location of the markdown file. All '\' need to be written as '\\'.
  "markdown.styles": [],

  // Sets how YAML front matter should be rendered in the markdown preview. 'hide' removes the front matter. Otherwise, the front matter is treated as markdown content.
  "markdown.previewFrontMatter": "hide",

  // Controls the font family used in the markdown preview.
  "markdown.preview.fontFamily": "-apple-system, BlinkMacSystemFont, 'Segoe WPC', 'Segoe UI', 'HelveticaNeue-Light', 'Ubuntu', 'Droid Sans', sans-serif",

  // Controls the font size in pixels used in the markdown preview.
  "markdown.preview.fontSize": 14,

  // Controls the line height used in the markdown preview. This number is relative to the font size.
  "markdown.preview.lineHeight": 1.6,

  // Scrolls the markdown preview to reveal the currently selected line from the editor.
  "markdown.preview.scrollPreviewWithEditorSelection": true,

  // Mark the current editor selection in the markdown preview.
  "markdown.preview.markEditorSelection": true,

  // When the markdown preview is scrolled, update the view of the editor.
  "markdown.preview.scrollEditorWithPreview": true,

  // Double click in the markdown preview to switch to the editor.
  "markdown.preview.doubleClickToSwitchToEditor": true,

  // [Experimental] Allow extensions to extend the markdown preview.
  "markdown.enableExperimentalExtensionApi": false,

  // Enable debug logging for the markdown extension.
  "markdown.trace": "off",


  // Configures if the built-in PHP language suggestions are enabled. The support suggests PHP globals and variables.
  "php.suggest.basic": true,

  // Enable/disable built-in PHP validation.
  "php.validate.enable": true,

  // Points to the PHP executable.
  "php.validate.executablePath": null,

  // Whether the linter is run on save or on type.
  "php.validate.run": "onSave",


  // Specifies the folder path containing the tsserver and lib*.d.ts files to use.
  "typescript.tsdk": null,

  // Disables automatic type acquisition. Requires TypeScript >= 2.0.6 and a restart after changing it.
  "typescript.disableAutomaticTypeAcquisition": false,

  // Check if a global install TypeScript compiler (e.g. tsc) differs from the used TypeScript language service.
  "typescript.check.tscVersion": true,

  // Check if NPM is installed for automatic typings acquisition
  "typescript.check.npmIsInstalled": true,

  // Enable/disable references CodeLens. Requires TypeScript >= 2.0.6.
  "typescript.referencesCodeLens.enabled": false,

  // Enable/disable implementations CodeLens. Requires TypeScript >= 2.2.0.
  "typescript.implementationsCodeLens.enabled": false,

  // Enables logging of the TS server to a file. This log can be used to diagnose TS Server issues. The log may contain file paths, source code, and other potentially sensitive information from your project.
  "typescript.tsserver.log": "off",

  // Enables tracing of messages sent to the TS server. This trace can be used to diagnose TS Server issues. The trace may contain file paths, source code, and other potentially sensitive information from your project.
  "typescript.tsserver.trace": "off",

  // Complete functions with their parameter signature.
  "typescript.useCodeSnippetsOnMethodSuggest": false,

  // Enable/disable TypeScript validation.
  "typescript.validate.enable": true,

  // Enable/disable default TypeScript formatter.
  "typescript.format.enable": true,

  // Defines space handling after a comma delimiter.
  "typescript.format.insertSpaceAfterCommaDelimiter": true,

  //  Defines space handling after a semicolon in a for statement.
  "typescript.format.insertSpaceAfterSemicolonInForStatements": true,

  // Defines space handling after a binary operator.
  "typescript.format.insertSpaceBeforeAndAfterBinaryOperators": true,

  // Defines space handling after keywords in a control flow statement.
  "typescript.format.insertSpaceAfterKeywordsInControlFlowStatements": true,

  // Defines space handling after function keyword for anonymous functions.
  "typescript.format.insertSpaceAfterFunctionKeywordForAnonymousFunctions": true,

  // Defines space handling before function argument parentheses. Requires TypeScript >= 2.1.5.
  "typescript.format.insertSpaceBeforeFunctionParenthesis": false,

  // Defines space handling after opening and before closing non empty parenthesis.
  "typescript.format.insertSpaceAfterOpeningAndBeforeClosingNonemptyParenthesis": false,

  // Defines space handling after opening and before closing non empty brackets.
  "typescript.format.insertSpaceAfterOpeningAndBeforeClosingNonemptyBrackets": false,

  // Defines space handling after opening and before closing non empty braces. Requires TypeScript >= 2.3.0.
  "typescript.format.insertSpaceAfterOpeningAndBeforeClosingNonemptyBraces": true,

  // Defines space handling after opening and before closing template string braces. Requires TypeScript >= 2.0.6.
  "typescript.format.insertSpaceAfterOpeningAndBeforeClosingTemplateStringBraces": false,

  // Defines space handling after opening and before closing JSX expression braces. Requires TypeScript >= 2.0.6.
  "typescript.format.insertSpaceAfterOpeningAndBeforeClosingJsxExpressionBraces": false,

  // Defines whether an open brace is put onto a new line for functions or not.
  "typescript.format.placeOpenBraceOnNewLineForFunctions": false,

  // Defines whether an open brace is put onto a new line for control blocks or not.
  "typescript.format.placeOpenBraceOnNewLineForControlBlocks": false,

  // Enable/disable JavaScript validation.
  "javascript.validate.enable": true,

  // Enable/disable default JavaScript formatter.
  "javascript.format.enable": true,

  // Defines space handling after a comma delimiter.
  "javascript.format.insertSpaceAfterCommaDelimiter": true,

  //  Defines space handling after a semicolon in a for statement.
  "javascript.format.insertSpaceAfterSemicolonInForStatements": true,

  // Defines space handling after a binary operator.
  "javascript.format.insertSpaceBeforeAndAfterBinaryOperators": true,

  // Defines space handling after keywords in a control flow statement.
  "javascript.format.insertSpaceAfterKeywordsInControlFlowStatements": true,

  // Defines space handling after function keyword for anonymous functions.
  "javascript.format.insertSpaceAfterFunctionKeywordForAnonymousFunctions": true,

  // Defines space handling before function argument parentheses. Requires TypeScript >= 2.1.5.
  "javascript.format.insertSpaceBeforeFunctionParenthesis": false,

  // Defines space handling after opening and before closing non empty parenthesis.
  "javascript.format.insertSpaceAfterOpeningAndBeforeClosingNonemptyParenthesis": false,

  // Defines space handling after opening and before closing non empty brackets.
  "javascript.format.insertSpaceAfterOpeningAndBeforeClosingNonemptyBrackets": false,

  // Defines space handling after opening and before closing non empty braces. Requires TypeScript >= 2.3.0.
  "javascript.format.insertSpaceAfterOpeningAndBeforeClosingNonemptyBraces": true,

  // Defines space handling after opening and before closing template string braces. Requires TypeScript >= 2.0.6.
  "javascript.format.insertSpaceAfterOpeningAndBeforeClosingTemplateStringBraces": false,

  // Defines space handling after opening and before closing JSX expression braces. Requires TypeScript >= 2.0.6.
  "javascript.format.insertSpaceAfterOpeningAndBeforeClosingJsxExpressionBraces": false,

  // Defines whether an open brace is put onto a new line for functions or not.
  "javascript.format.placeOpenBraceOnNewLineForFunctions": false,

  // Defines whether an open brace is put onto a new line for control blocks or not.
  "javascript.format.placeOpenBraceOnNewLineForControlBlocks": false,

  // Enable/disable auto JSDoc comments
  "jsDocCompletion.enabled": true,

  // Enable/disable semantic checking of JavaScript files. Existing jsconfig.json or tsconfig.json files override this setting. Requires TypeScript >=2.3.1.
  "javascript.implicitProjectConfig.checkJs": false,


  // Automatically update extensions
  "extensions.autoUpdate": false,


  // Customizes which terminal to run on Windows.
  "terminal.external.windowsExec": "%COMSPEC%",

  // Customizes which terminal application to run on OS X.
  "terminal.external.osxExec": "Terminal.app",

  // Customizes which terminal to run on Linux.
  "terminal.external.linuxExec": "xterm",


  // The path of the shell that the terminal uses on Linux.
  "terminal.integrated.shell.linux": "/bin/bash",

  // The command line arguments to use when on the Linux terminal.
  "terminal.integrated.shellArgs.linux": [],

  // The path of the shell that the terminal uses on OS X.
  "terminal.integrated.shell.osx": "/bin/bash",

  // The command line arguments to use when on the OS X terminal.
  "terminal.integrated.shellArgs.osx": [
    "-l"
  ],

  // The path of the shell that the terminal uses on Windows. When using shells shipped with Windows (cmd, PowerShell or Bash on Ubuntu), prefer C:\Windows\sysnative over C:\Windows\System32 to use the 64-bit versions.
  "terminal.integrated.shell.windows": "cmd.exe",

  // The command line arguments to use when on the Windows terminal.
  "terminal.integrated.shellArgs.windows": [],

  // When set, this will prevent the context menu from appearing when right clicking within the terminal, instead it will copy when there is a selection and paste when there is no selection.
  "terminal.integrated.rightClickCopyPaste": false,

  // Controls the font family of the terminal, this defaults to editor.fontFamily's value.
  "terminal.integrated.fontFamily": "",

  // Controls whether font ligatures are enabled in the terminal.
  "terminal.integrated.fontLigatures": false,

  // Controls the font size in pixels of the terminal.
  "terminal.integrated.fontSize": 12,

  // Controls the line height of the terminal, this number is multipled by the terminal font size to get the actual line-height in pixels.
  "terminal.integrated.lineHeight": 1.2,

  // Whether to enable bold text within the terminal, this requires support from the terminal shell.
  "terminal.integrated.enableBold": true,

  // Controls whether the terminal cursor blinks.
  "terminal.integrated.cursorBlinking": false,

  // Controls the style of terminal cursor.
  "terminal.integrated.cursorStyle": "block",

  // Controls the maximum amount of lines the terminal keeps in its buffer.
  "terminal.integrated.scrollback": 1000,

  // Controls whether locale variables are set at startup of the terminal, this defaults to true on OS X, false on other platforms.
  "terminal.integrated.setLocaleVariables": true,

  // An explicit start path where the terminal will be launched, this is used as the current working directory (cwd) for the shell process. This may be particularly useful in workspace settings if the root directory is not a convenient cwd.
  "terminal.integrated.cwd": "",

  // Whether to confirm on exit if there are active terminal sessions.
  "terminal.integrated.confirmOnExit": false,

  // A set of command IDs whose keybindings will not be sent to the shell and instead always be handled by Code. This allows the use of keybindings that would normally be consumed by the shell to act the same as when the terminal is not focused, for example ctrl+p to launch Quick Open.
  "terminal.integrated.commandsToSkipShell": [
    "editor.action.toggleTabFocusMode",
    "workbench.action.debug.continue",
    "workbench.action.debug.pause",
    "workbench.action.debug.restart",
    "workbench.action.debug.run",
    "workbench.action.debug.start",
    "workbench.action.debug.stop",
    "workbench.action.focusActiveEditorGroup",
    "workbench.action.focusFirstEditorGroup",
    "workbench.action.focusSecondEditorGroup",
    "workbench.action.focusThirdEditorGroup",
    "workbench.action.openNextRecentlyUsedEditorInGroup",
    "workbench.action.openPreviousRecentlyUsedEditorInGroup",
    "workbench.action.quickOpen",
    "workbench.action.showCommands",
    "workbench.action.terminal.clear",
    "workbench.action.terminal.copySelection",
    "workbench.action.terminal.focus",
    "workbench.action.terminal.focusAtIndex1",
    "workbench.action.terminal.focusAtIndex2",
    "workbench.action.terminal.focusAtIndex3",
    "workbench.action.terminal.focusAtIndex4",
    "workbench.action.terminal.focusAtIndex5",
    "workbench.action.terminal.focusAtIndex6",
    "workbench.action.terminal.focusAtIndex7",
    "workbench.action.terminal.focusAtIndex8",
    "workbench.action.terminal.focusAtIndex9",
    "workbench.action.terminal.focusNext",
    "workbench.action.terminal.focusPrevious",
    "workbench.action.terminal.kill",
    "workbench.action.terminal.new",
    "workbench.action.terminal.paste",
    "workbench.action.terminal.runActiveFile",
    "workbench.action.terminal.runSelectedText",
    "workbench.action.terminal.scrollDown",
    "workbench.action.terminal.scrollDownPage",
    "workbench.action.terminal.scrollToBottom",
    "workbench.action.terminal.scrollToTop",
    "workbench.action.terminal.scrollUp",
    "workbench.action.terminal.scrollUpPage",
    "workbench.action.terminal.toggleTerminal"
  ],


  // Controls if Problems view should automatically reveal files when opening them
  "problems.autoReveal": true,


  // Enable usage data and errors to be sent to Microsoft.
  "telemetry.enableTelemetry": true,

  // Enable crash reports to be sent to Microsoft.
  // This option requires restart to take effect.
  "telemetry.enableCrashReporter": true,


  // Whether git is enabled
  "git.enabled": true,

  // Path to the git executable
  "git.path": null,

  // Whether auto refreshing is enabled
  "git.autorefresh": true,

  // Whether auto fetching is enabled
  "git.autofetch": true,

  // Confirm before synchronizing git repositories
  "git.confirmSync": true,

  // Controls the git badge counter. `all` counts all changes. `tracked` counts only the tracked changes. `off` turns it off.
  "git.countBadge": "all",

  // Controls what type of branches are listed when running `Checkout to...`. `all` shows all refs, `local` shows only the local branchs, `tags` shows only tags and `remote` shows only remote branches.
  "git.checkoutType": "all",

  // Ignores the legacy Git warning
  "git.ignoreLegacyWarning": false,

  // Ignores the warning when there are too many changes in a repository
  "git.ignoreLimitWarning": false,


  // Configure editor settings to be overridden for [go] language.
  "[go]":  {
    "editor.insertSpaces": false
  },

  // Configure editor settings to be overridden for [json] language.
  "[json]":  {
    "editor.quickSuggestions": {
        "strings": true
    }
  },

  // Configure editor settings to be overridden for [makefile] language.
  "[makefile]":  {
    "editor.insertSpaces": false
  },

  // Configure editor settings to be overridden for [markdown] language.
  "[markdown]":  {
    "editor.wordWrap": "on",
    "editor.quickSuggestions": false
  },

  // Configure editor settings to be overridden for [yaml] language.
  "[yaml]":  {
    "editor.insertSpaces": true,
    "editor.tabSize": 2
  },


  // If set to true, the new version message won't be shown anymore.
  "vsicons.dontShowNewVersionMessage": false,

  // If set to true, the extension will restart automatically on project detection.
  "vsicons.projectDetection.autoReload": false,

  // If set to true, the extension will disable the project detection.
  "vsicons.projectDetection.disableDetect": false,

  // If set to true, the extension will match some of the common Angular patterns.
  "vsicons.presets.angular": false,

  // If set to true, the extension will use the official JS icon.
  "vsicons.presets.jsOfficial": false,

  // If set to true, the extension will use the official TS icon.
  "vsicons.presets.tsOfficial": false,

  // If set to true, the extension will use the official JSON icon.
  "vsicons.presets.jsonOfficial": false,

  // If set to true, all folders will be hidden.
  "vsicons.presets.hideFolders": false,

  // configuration.presets.foldersAllDefaultIcon.description
  "vsicons.presets.foldersAllDefaultIcon": false,

  // These custom associations will override the file icon associations defined by default.
  "vsicons.associations.files": [],

  // These custom associations will override the folder icon associations defined by default.
  "vsicons.associations.folders": [],

  // This setting will let you change default dark file icon.
  "vsicons.associations.fileDefault.file": null,

  // This setting will let you change default light file icon.
  "vsicons.associations.fileDefault.file_light": null,

  // This setting will let you change default dark folder icon.
  "vsicons.associations.folderDefault.folder": null,

  // This setting will let you change default light folder icon.
  "vsicons.associations.folderDefault.folder_light": null,


  // For which languages indent-rainbow should be activated. When empty will use for all languages.
  "indentRainbow.includedLanguages": [],

  // For which languages indent-rainbow should be deactivated. When left empty will ignore.
  "indentRainbow.excludedLanguages": [],

  // The delay in ms until the editor gets updated.
  "indentRainbow.updateDelay": 100,

  // Automatically change indent settings for languages (see README.md for details).
  "indentRainbow.indentSetter": {},

  // Indent color for when there is an error in the indentation, for example if you have your tabs set to 2 spaces but the indent is 3 spaces. Can be any type of web based color format (hex, rgba, rgb).
  "indentRainbow.error_color": "rgba(128,32,32,0.6)",

  // An array with color (hex, rgba, rgb) strings which are used as colors, can be any length.
  "indentRainbow.colors": [
    "rgba(64,64,16,0.3)",
    "rgba(32,64,32,0.3)",
    "rgba(64,32,64,0.3)",
    "rgba(16,48,48,0.3)"
  ],


  // Controls whether eslint is enabled for JavaScript files or not.
  "eslint.enable": true,

  // A path added to NODE_PATH when resolving the eslint module.
  "eslint.nodePath": null,

  // Uses the legacy module resolving.
  "eslint._legacyModuleResolve": false,

  // The eslint options object to provide args normally passed to eslint when executed from a command line (see http://eslint.org/docs/developer-guide/nodejs-api#cliengine).
  "eslint.options": {},

  // Traces the communication between VSCode and the eslint linter service.
  "eslint.trace.server": "off",

  // Run the linter on save (onSave) or on type (onType)
  "eslint.run": "onType",

  // Turns auto fix on save on or off.
  "eslint.autoFixOnSave": false,

  // 
  "eslint.workingDirectories": [],

  // An array of language ids which should be validated by ESLint
  "eslint.validate": [
    "javascript",
    "javascriptreact"
  ],


  // A path to file or object containing the configuration options for js-beautify. If the .jsbeautifyrc file exists in project root, it overrides this configuration.
  "beautify.config": null,

  // Link file types to the beautifier type
  "beautify.language": {
    "js": {
      "type": [
        "javascript",
        "json"
      ],
      "filename": [
        ".jshintrc",
        ".jsbeautify"
      ]
    },
    "css": [
      "css",
      "scss"
    ],
    "html": [
      "htm",
      "html"
    ]
  },


  // Controls whether auto detection of Grunt tasks is on or off. Default is on.
  "grunt.autoDetect": "on",