dmesg-spx-2.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]
[    0.000000] Linux version 5.12.0-rc8-00036-gf29e782159aa (dvitali@denvit-ws1) (aarch64-linux-gnu-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36.1) #10 SMP PREEMPT Tue Apr 20 23:24:56 CEST 2021
[    0.000000] efi: EFI v2.70 by Qualcomm Technologies, Inc.
[    0.000000] efi: ACPI 2.0=0xffffe000 TPMFinalLog=0xfff63000 MEMATTR=0xfae63018 ESRT=0xfb1b4018 SMBIOS=0xfff5c000 TPMEventLog=0xf8175018 RNG=0xfeb2bd98 MEMRESERVE=0xf8172b98 
[    0.000000] efi: seeding entropy pool
[    0.000000] esrt: Reserving ESRT space from 0x00000000fb1b4018 to 0x00000000fb1b4118.
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000FFFFE000 000024 (v02 QCOM  )
[    0.000000] ACPI: XSDT 0x00000000FFFFD000 000094 (v01 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: FACP 0x00000000FFF8C000 000114 (v06 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: DSDT 0x00000000FFF8D000 062098 (v02 QCOMM  SDM8180  00000003 MSFT 05000000)
[    0.000000] ACPI: MSDM 0x00000000FFFFC000 000055 (v01 MSFT            00000001 MSFT 00000001)
[    0.000000] ACPI: BERT 0x00000000FFFFB000 000030 (v01 QCOM   QCOMEDK2 00000000 QCOM 00000001)
[    0.000000] ACPI: BGRT 0x00000000FFFFA000 000038 (v01 QCOM   QCOMEDK2 00000001 QCOM 00000001)
[    0.000000] ACPI: BGRT 0x00000000FFFF9000 000038 (v01 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: CSRT 0x00000000FFFF1000 007CB7 (v00 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: DBG2 0x00000000FFFF0000 00041A (v01 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: GTDT 0x00000000FFF8B000 00009C (v02 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: IORT 0x00000000FFF89000 001943 (v00 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: APIC 0x00000000FFF88000 0002EC (v05 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: MCFG 0x00000000FFF87000 00006C (v01 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: PPTT 0x00000000FFF86000 00019E (v01 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: TPM2 0x00000000FFF85000 000054 (v03 QCOM   QCOMEDK2 00008180 QCOM 00000001)
[    0.000000] ACPI: FPDT 0x00000000FFF84000 000044 (v01 QCOM   QCOMEDK2 00000001 QCOM 00000001)
[    0.000000] NUMA: Failed to initialise from firmware
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000df75fffff]
[    0.000000] NUMA: NODE_DATA [mem 0xdf5708c00-0xdf570afff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000df75fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000805fffff]
[    0.000000]   node   0: [mem 0x0000000080600000-0x00000000829fffff]
[    0.000000]   node   0: [mem 0x0000000083722000-0x00000000856fffff]
[    0.000000]   node   0: [mem 0x0000000085d00000-0x0000000085efffff]
[    0.000000]   node   0: [mem 0x0000000085f20000-0x0000000085f4ffff]
[    0.000000]   node   0: [mem 0x0000000085f50000-0x0000000085ffffff]
[    0.000000]   node   0: [mem 0x0000000086000000-0x00000000861fffff]
[    0.000000]   node   0: [mem 0x000000008b700000-0x000000009aafffff]
[    0.000000]   node   0: [mem 0x000000009ab00000-0x000000009dff7fff]
[    0.000000]   node   0: [mem 0x000000009dff8000-0x000000009dffffff]
[    0.000000]   node   0: [mem 0x000000009e000000-0x000000009e3fffff]
[    0.000000]   node   0: [mem 0x000000009e400000-0x000000009f7fffff]
[    0.000000]   node   0: [mem 0x000000009f800000-0x000000009ff8ffff]
[    0.000000]   node   0: [mem 0x000000009ff90000-0x000000009ff91fff]
[    0.000000]   node   0: [mem 0x000000009ffb0000-0x000000009ffcffff]
[    0.000000]   node   0: [mem 0x000000009ffd0000-0x000000009fffffff]
[    0.000000]   node   0: [mem 0x00000000a0000000-0x00000000fea51fff]
[    0.000000]   node   0: [mem 0x00000000fea52000-0x00000000fff6afff]
[    0.000000]   node   0: [mem 0x00000000fff6b000-0x000000027fffffff]
[    0.000000]   node   0: [mem 0x0000000c00000000-0x0000000df75fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000df75fffff]
[    0.000000] On node 0 totalpages: 4132256
[    0.000000]   DMA zone: 8192 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 497568 pages, LIFO batch:63
[    0.000000]   DMA zone: 286 pages in unavailable ranges
[    0.000000]   Normal zone: 56792 pages used for memmap
[    0.000000]   Normal zone: 3634688 pages, LIFO batch:63
[    0.000000] cma: Reserved 32 MiB at 0x00000000fc800000
[    0.000000] psci: probing for conduit method from ACPI.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] ACPI: SRAT not present
[    0.000000] percpu: Embedded 23 pages/cpu s57240 r8192 d28776 u94208
[    0.000000] pcpu-alloc: s57240 r8192 d28776 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4067272
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(hd1,msdos1)/Image.gz
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000eebb0000-0x00000000f2bb0000] (64MB)
[    0.000000] Memory: 15728480K/16529024K available (17024K kernel code, 3116K rwdata, 8724K rodata, 6144K init, 498K bss, 767776K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: 928 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[    0.000000] ACPI: SRAT not present
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] random: get_random_bytes called from start_kernel+0x34c/0x538 with crng_init=0
[    0.000000] ACPI GTDT: found 1 memory-mapped timer block(s).
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000096] Console: colour dummy device 80x25
[    0.000631] printk: console [tty0] enabled
[    0.000681] ACPI: Core revision 20210105
[    0.002115] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.002134] pid_max: default: 32768 minimum: 301
[    0.002187] LSM: Security Framework initializing
[    0.002246] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.002280] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.003247] rcu: Hierarchical SRCU implementation.
[    0.003365] Remapping and enabling EFI services.
[    0.003385] UEFI virtual mapping missing or invalid -- runtime services will not be available
[    0.003577] smp: Bringing up secondary CPUs ...
[    0.004527] Detected VIPT I-cache on CPU1
[    0.004556] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[    0.004598] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
[    0.005547] Detected VIPT I-cache on CPU2
[    0.005570] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[    0.005612] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
[    0.006607] Detected VIPT I-cache on CPU3
[    0.006628] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[    0.006668] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
[    0.008608] CPU features: detected: Spectre-v2
[    0.008627] CPU features: detected: Spectre-v4
[    0.008632] CPU features: detected: ARM erratum 1418040
[    0.008635] Detected PIPT I-cache on CPU4
[    0.008657] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[    0.008675] arch_timer: Enabling local workaround for ARM erratum 1418040
[    0.008702] CPU4: Booted secondary processor 0x0000000400 [0x51df804e]
[    0.009937] Detected PIPT I-cache on CPU5
[    0.009964] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[    0.009983] arch_timer: Enabling local workaround for ARM erratum 1418040
[    0.010013] CPU5: Booted secondary processor 0x0000000500 [0x51df804e]
[    0.011346] Detected PIPT I-cache on CPU6
[    0.011374] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[    0.011392] arch_timer: Enabling local workaround for ARM erratum 1418040
[    0.011421] CPU6: Booted secondary processor 0x0000000600 [0x51df804e]
[    0.012844] Detected PIPT I-cache on CPU7
[    0.012872] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[    0.012890] arch_timer: Enabling local workaround for ARM erratum 1418040
[    0.012920] CPU7: Booted secondary processor 0x0000000700 [0x51df804e]
[    0.012975] smp: Brought up 1 node, 8 CPUs
[    0.013127] SMP: Total of 8 processors activated.
[    0.013135] CPU features: detected: Privileged Access Never
[    0.013143] CPU features: detected: LSE atomic instructions
[    0.013151] CPU features: detected: 32-bit EL0 Support
[    0.013158] CPU features: detected: Common not Private translations
[    0.013166] CPU features: detected: RAS Extension Support
[    0.013174] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.013184] CPU features: detected: CRC32 instructions
[    0.013193] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.028756] CPU: All CPU(s) started at EL1
[    0.028795] alternatives: patching kernel code
[    0.031025] devtmpfs: initialized
[    0.031501] KASLR enabled
[    0.031611] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.031631] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.032544] pinctrl core: initialized pinctrl subsystem
[    0.033109] SMBIOS 3.3 present.
[    0.033128] DMI: Microsoft Corporation Surface Pro X/Surface Pro X, BIOS 7.545.140 11/09/2020
[    0.033468] NET: Registered protocol family 16
[    0.034242] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.034495] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.034959] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.034991] audit: initializing netlink subsys (disabled)
[    0.035091] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[    0.035491] thermal_sys: Registered thermal governor 'step_wise'
[    0.035496] thermal_sys: Registered thermal governor 'power_allocator'
[    0.035545] cpuidle: using governor menu
[    0.035638] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.035756] ASID allocator initialised with 32768 entries
[    0.036152] ACPI: bus type PCI registered
[    0.036162] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.036364] Serial: AMBA PL011 UART driver
[    0.042250] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.042263] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.042273] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.042282] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.043010] cryptd: max_cpu_qlen set to 1000
[    0.044300] ACPI: Added _OSI(Module Device)
[    0.044311] ACPI: Added _OSI(Processor Device)
[    0.044319] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044326] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044335] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044343] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.044351] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.081821] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [BAUD] at bit offset/length 352/32 exceeds size of target Buffer (272 bits) (20210105/dsopcode-198)
[    0.088695] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.094820] ACPI Error: AE_TYPE, Opcode is not deferred [BAUD] (BufferField) (20210105/nsinit-411)
[    0.094841] ACPI Error: AE_TYPE, Could not execute arguments for [BAUD] (BufferField) (20210105/nsinit-419)
[    0.097419] ACPI: Interpreter enabled
[    0.097429] ACPI: Using GIC for interrupt routing
[    0.097460] ACPI: MCFG table detected, 4 entries
[    0.107733] ACPI: PM: Power Resource [P0RR] (off)
[    0.107814] ACPI: PM: Power Resource [R0RR] (off)
[    0.108104] ACPI: PM: Power Resource [P1RR] (off)
[    0.108195] ACPI: PM: Power Resource [R1RR] (off)
[    0.108340] ACPI: PM: Power Resource [P2RR] (off)
[    0.108422] ACPI: PM: Power Resource [R2RR] (off)
[    0.108562] ACPI: PM: Power Resource [P3RR] (off)
[    0.108645] ACPI: PM: Power Resource [R3RR] (off)
[    0.120316] gpio gpiochip0: (QCOM040D:00): setup of own GPIO ACPI:Event failed
[    0.120331] sc8180x-pinctrl QCOM040D:00: Failed to request GPIO for pin 0x00BD, err -517
[    0.120345] gpio gpiochip0: (QCOM040D:00): failed to get GPIO descriptor
[    0.120355] sc8180x-pinctrl QCOM040D:00: Failed to request GPIO for pin 0x0140, err -22
[    0.125618] ACPI: PM: Power Resource [WRST] (on)
[    0.126613] ACPI Warning: \_SB.GPU0._CLS: Return Package is too small - found 1 elements, expected 3 (20210105/nsprepkg-362)
[    0.138040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-01])
[    0.138062] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.138342] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.138602] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.143322] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 0x60000000-0x601fffff] not reserved in ACPI namespace
[    0.143346] acpi PNP0A08:00: ECAM at [mem 0x60000000-0x601fffff] for [bus 00-01]
[    0.143623] PCI host bridge to bus 0000:00
[    0.143634] pci_bus 0000:00: root bus resource [bus 00-01]
[    0.143772] pci 0000:00:00.0: [17cb:0109] type 01 class 0x060400
[    0.143849] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.144184] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.144345] ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 00-01])
[    0.144364] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.144643] acpi PNP0A08:02: _OSC: platform does not support [LTR]
[    0.144900] acpi PNP0A08:02: _OSC: OS now controls [PME PCIeCapability]
[    0.148566] acpi PNP0A08:02: [Firmware Bug]: ECAM area [mem 0x70000000-0x701fffff] not reserved in ACPI namespace
[    0.148590] acpi PNP0A08:02: ECAM at [mem 0x70000000-0x701fffff] for [bus 00-01]
[    0.148855] PCI host bridge to bus 0002:00
[    0.148867] pci_bus 0002:00: root bus resource [bus 00-01]
[    0.148995] pci 0002:00:00.0: [17cb:0109] type 01 class 0x060400
[    0.149052] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[    0.149373] pci 0002:01:00.0: [1c5c:1327] type 00 class 0x010802
[    0.149404] pci 0002:01:00.0: reg 0x10: [mem 0x71f00000-0x71f03fff 64bit]
[    0.149533] pci 0002:01:00.0: supports D1
[    0.149543] pci 0002:01:00.0: PME# supported from D0 D1 D3hot
[    0.149727] pci 0002:00:00.0: BAR 14: no space for [mem size 0x00100000]
[    0.149740] pci 0002:00:00.0: BAR 14: failed to assign [mem size 0x00100000]
[    0.149752] pci 0002:01:00.0: BAR 0: no space for [mem size 0x00004000 64bit]
[    0.149763] pci 0002:01:00.0: BAR 0: failed to assign [mem size 0x00004000 64bit]
[    0.149775] pci 0002:00:00.0: PCI bridge to [bus 01]
[    0.149789] pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.149912] ACPI: PCI Root Bridge [PCI3] (domain 0003 [bus 00-01])
[    0.149930] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.150201] acpi PNP0A08:03: _OSC: platform does not support [LTR]
[    0.150456] acpi PNP0A08:03: _OSC: OS now controls [PME PCIeCapability]
[    0.154123] acpi PNP0A08:03: [Firmware Bug]: ECAM area [mem 0x40000000-0x401fffff] not reserved in ACPI namespace
[    0.154146] acpi PNP0A08:03: ECAM at [mem 0x40000000-0x401fffff] for [bus 00-01]
[    0.154408] PCI host bridge to bus 0003:00
[    0.154420] pci_bus 0003:00: root bus resource [bus 00-01]
[    0.154558] pci 0003:00:00.0: [17cb:0109] type 01 class 0x060400
[    0.154667] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
[    0.155013] pci 0003:00:00.0: PCI bridge to [bus 01]
[    0.159394] iommu: Default domain type: Translated 
[    0.159501] vgaarb: loaded
[    0.159667] SCSI subsystem initialized
[    0.159748] libata version 3.00 loaded.
[    0.159824] ACPI: bus type USB registered
[    0.159881] usbcore: registered new interface driver usbfs
[    0.159909] usbcore: registered new interface driver hub
[    0.159933] usbcore: registered new device driver usb
[    0.160296] pps_core: LinuxPPS API ver. 1 registered
[    0.160306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.160323] PTP clock support registered
[    0.160388] EDAC MC: Ver: 3.0.0
[    0.161234] FPGA manager framework
[    0.161286] Advanced Linux Sound Architecture Driver Initialized.
[    0.161613] Bluetooth: Core ver 2.22
[    0.161636] NET: Registered protocol family 31
[    0.161644] Bluetooth: HCI device and connection manager initialized
[    0.161656] Bluetooth: HCI socket layer initialized
[    0.161665] Bluetooth: L2CAP socket layer initialized
[    0.161678] Bluetooth: SCO socket layer initialized
[    0.161937] clocksource: Switched to clocksource arch_sys_counter
[    0.162027] VFS: Disk quotas dquot_6.6.0
[    0.162060] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.162183] pnp: PnP ACPI init
[    0.163599] pnp: PnP ACPI: found 0 devices
[    0.167365] NET: Registered protocol family 2
[    0.167600] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.167673] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.168040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.168301] TCP: Hash tables configured (established 131072 bind 65536)
[    0.168374] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.168460] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.168609] NET: Registered protocol family 1
[    0.168819] RPC: Registered named UNIX socket transport module.
[    0.168827] RPC: Registered udp transport module.
[    0.168832] RPC: Registered tcp transport module.
[    0.168837] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.169161] PCI: CLS 0 bytes, default 64
[    0.169247] Unpacking initramfs...
[    0.805163] Freeing initrd memory: 14876K
[    0.805698] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
[    0.805822] hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 counters available
[    0.805836] kvm [1]: HYP mode not available
[    0.807966] Initialise system trusted keyrings
[    0.808049] workingset: timestamp_bits=42 max_order=22 bucket_order=0
[    0.810550] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.810823] NFS: Registering the id_resolver key type
[    0.810838] Key type id_resolver registered
[    0.810844] Key type id_legacy registered
[    0.810880] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.810887] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.810960] 9p: Installing v9fs 9p2000 file system support
[    0.839512] Key type asymmetric registered
[    0.839525] Asymmetric key parser 'x509' registered
[    0.839560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.839572] io scheduler mq-deadline registered
[    0.839580] io scheduler kyber registered
[    0.845123] efifb: probing for efifb
[    0.845164] efifb: framebuffer at 0x80600000, using 21600k, total 21600k
[    0.845175] efifb: mode is 2880x1920x32, linelength=11520, pages=1
[    0.845185] efifb: scrolling: redraw
[    0.845191] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.889939] Console: switching to colour frame buffer device 360x120
[    0.933211] fb0: EFI VGA frame buffer device
[    0.933751] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.933920] ACPI: button: Lid Switch [LID0]
[    0.934427] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.934666] ACPI: \_SB_.TZ1_: Invalid passive threshold
[    0.934750] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.934866] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.935057] ACPI: \_SB_.TZ3_: Invalid passive threshold
[    0.935140] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.935333] ACPI: \_SB_.TZ5_: Invalid passive threshold
[    0.935416] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.935608] ACPI: \_SB_.TZ7_: Invalid passive threshold
[    0.935691] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.935884] ACPI: \_SB_.TZ9_: Invalid passive threshold
[    0.935969] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.936161] ACPI: \_SB_.TZ15: Invalid passive threshold
[    0.936253] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.936476] ACPI: \_SB_.TZ16: Invalid passive threshold
[    0.936679] ACPI: \_SB_.TZ17: Invalid passive threshold
[    0.936761] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.936955] ACPI: \_SB_.TZ18: Invalid passive threshold
[    0.937048] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.937271] ACPI: \_SB_.TZ19: Invalid passive threshold
[    0.937470] ACPI: \_SB_.TZ20: Invalid passive threshold
[    0.937561] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.937781] ACPI: \_SB_.TZ21: Invalid passive threshold
[    0.937903] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.938035] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.938230] ACPI: \_SB_.TZ40: Invalid passive threshold
[    0.938313] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.938417] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.938641] ACPI: \_SB_.TZ99: Invalid passive threshold
[    0.938767] ACPI: thermal: [Firmware Bug]: No valid trip found
[    0.939002] EINJ: EINJ table not found.
[    0.946848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.948172] SuperH (H)SCI(F) driver initialized
[    0.948433] msm_serial: driver initialized
[    0.954736] loop: module loaded
[    0.955202] megasas: 07.714.04.00-rc1
[    0.957670] libphy: Fixed MDIO Bus: probed
[    0.958416] tun: Universal TUN/TAP device driver, 1.6
[    0.958873] thunder_xcv, ver 1.0
[    0.958945] thunder_bgx, ver 1.0
[    0.959011] nicpf, ver 1.0
[    0.959713] hclge is initializing
[    0.959770] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    0.959866] hns3: Copyright (c) 2017 Huawei Corporation.
[    0.959965] e1000: Intel(R) PRO/1000 Network Driver
[    0.960032] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.960137] e1000e: Intel(R) PRO/1000 Network Driver
[    0.960205] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.960312] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.960385] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.960478] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    0.960562] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.960827] sky2: driver version 1.30
[    0.961465] usbcore: registered new interface driver r8152
[    0.961558] usbcore: registered new interface driver cdc_ether
[    0.961655] usbcore: registered new interface driver r8153_ecm
[    0.961800] VFIO - User Level meta-driver version: 0.3
[    1.143843] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.143934] ehci-pci: EHCI PCI platform driver
[    1.144015] ehci-platform: EHCI generic platform driver
[    1.144163] ehci-orion: EHCI orion driver
[    1.144273] ehci-exynos: EHCI Exynos driver
[    1.144383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.144473] ohci-pci: OHCI PCI platform driver
[    1.144555] ohci-platform: OHCI generic platform driver
[    1.144681] ohci-exynos: OHCI Exynos driver
[    1.144931] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    1.145017] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[    1.145264] xhci-hcd xhci-hcd.3.auto: hcc params 0x0238ffe5 hci version 0x110 quirks 0x0000000000010010
[    1.145414] xhci-hcd xhci-hcd.3.auto: irq 190, io mem 0x0a400000
[    1.145905] hub 1-0:1.0: USB hub found
[    1.145982] hub 1-0:1.0: 2 ports detected
[    1.146286] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    1.146366] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[    1.146472] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.1 Enhanced SuperSpeed
[    1.146600] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.146940] hub 2-0:1.0: USB hub found
[    1.147006] hub 2-0:1.0: 2 ports detected
[    1.147304] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    1.147385] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
[    1.147630] xhci-hcd xhci-hcd.5.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010010
[    1.147778] xhci-hcd xhci-hcd.5.auto: irq 234, io mem 0x0a600000
[    1.148194] hub 3-0:1.0: USB hub found
[    1.148260] hub 3-0:1.0: 1 port detected
[    1.148445] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    1.148524] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
[    1.148629] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.1 Enhanced SuperSpeed
[    1.154251] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.160074] hub 4-0:1.0: USB hub found
[    1.165653] hub 4-0:1.0: 1 port detected
[    1.171398] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.176975] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[    1.182680] xhci-hcd xhci-hcd.7.auto: hcc params 0x0230ffe5 hci version 0x110 quirks 0x0000000000010010
[    1.188317] xhci-hcd xhci-hcd.7.auto: irq 239, io mem 0x0a800000
[    1.194258] hub 5-0:1.0: USB hub found
[    1.199878] hub 5-0:1.0: 1 port detected
[    1.205564] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.211145] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[    1.216718] xhci-hcd xhci-hcd.7.auto: Host supports USB 3.1 Enhanced SuperSpeed
[    1.222305] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.228144] hub 6-0:1.0: USB hub found
[    1.233747] hub 6-0:1.0: 1 port detected
[    1.239554] usbcore: registered new interface driver usb-storage
[    1.246722] i2c /dev entries driver
[    1.252809] geni_i2c QCOM0411:00: Bus frequency not specified, default to 100kHz.
[    1.259818] geni_i2c QCOM0411:01: Bus frequency not specified, default to 100kHz.
[    1.266787] geni_i2c QCOM0411:02: Bus frequency not specified, default to 100kHz.
[    1.276519] sdhci: Secure Digital Host Controller Interface driver
[    1.282083] sdhci: Copyright(c) Pierre Ossman
[    1.287949] Synopsys Designware Multimedia Card Interface Driver
[    1.294029] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.300405] ledtrig-cpu: registered to indicate activity on CPUs
[    1.306929] usbcore: registered new interface driver usbhid
[    1.312459] usbhid: USB HID core driver
[    1.320925] NET: Registered protocol family 17
[    1.326496] 9pnet: Installing 9P2000 support
[    1.331988] Key type dns_resolver registered
[    1.337584] registered taskstats version 1
[    1.343074] Loading compiled-in X.509 certificates
[    1.348844] BERT: Error records from previous boot:
[    1.354334] [Hardware Error]: It has been corrected by h/w and requires no further action
[    1.359882] [Hardware Error]: event severity: corrected
[    1.365395] [Hardware Error]:  Error 0, type: fatal
[    1.370899] [Hardware Error]:   section type: unknown, 85183a8b-9c41-429c-939c-5c3c087ca280
[    1.376450] [Hardware Error]:   section length: 0x38
[    1.381989] [Hardware Error]:   00000000: 50670071 4be7478f 548713ad 2fc679f3  q.gP.G.K...T.y./
[    1.387575] [Hardware Error]:   00000010: 00000000 00000000 00000000 00000000  ................
[    1.393161] [Hardware Error]:   00000020: 00000000 03050012 00000001 00000000  ................
[    1.398735] [Hardware Error]:   00000030: 00000000 00000076                    ....v...
[    1.404287] [Hardware Error]:  Error 1, type: fatal
[    1.409839] [Hardware Error]:   section type: unknown, 85183a8b-9c41-429c-939c-5c3c087ca280
[    1.415434] [Hardware Error]:   section length: 0x38
[    1.420995] [Hardware Error]:   00000000: 50670071 4be7478f 548713ad 2fc679f3  q.gP.G.K...T.y./
[    1.426627] [Hardware Error]:   00000010: 00000000 00000000 00000000 00000000  ................
[    1.432259] [Hardware Error]:   00000020: 00000000 03050012 00000001 00000000  ................
[    1.437898] [Hardware Error]:   00000030: 00000000 00000076                    ....v...
[    1.443511] [Hardware Error]:  Error 2, type: fatal
[    1.449098] [Hardware Error]:   section type: unknown, 85183a8b-9c41-429c-939c-5c3c087ca280
[    1.454739] [Hardware Error]:   section length: 0x38
[    1.454745] [Hardware Error]:   00000000: 50670071 4be7478f 548713ad 2fc679f3  q.gP.G.K...T.y./
[    1.466089] [Hardware Error]:   00000010: 00000000 00000000 00000000 00000000  ................
[    1.471820] [Hardware Error]:   00000020: 00000000 03050012 00000001 00000000  ................
[    1.477532] [Hardware Error]:   00000030: 00000000 00000076                    ....v...
[    1.483236] [Hardware Error]:  Error 3, type: fatal
[    1.488893] [Hardware Error]:   section type: unknown, 85183a8b-9c41-429c-939c-5c3c087ca280
[    1.494612] [Hardware Error]:   section length: 0x38
[    1.500277] [Hardware Error]:   00000000: 50670071 4be7478f 548713ad 2fc679f3  q.gP.G.K...T.y./
[    1.506011] [Hardware Error]:   00000010: 00000000 00000000 00000000 00000000  ................
[    1.511741] [Hardware Error]:   00000020: 00000000 03050012 00000001 00000000  ................
[    1.517461] [Hardware Error]:   00000030: 00000000 00000076                    ....v...
[    1.523168] [Hardware Error]:  Error 4, type: fatal
[    1.528832] [Hardware Error]:   section type: unknown, 85183a8b-9c41-429c-939c-5c3c087ca280
[    1.534558] [Hardware Error]:   section length: 0x38
[    1.537948] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    1.540265] [Hardware Error]:   00000000: 50670071 4be7478f 548713ad 2fc679f3  q.gP.G.K...T.y./
[    1.551888] [Hardware Error]:   00000010: 00000000 00000000 00000000 00000000  ................
[    1.557782] [Hardware Error]:   00000020: 00000000 03050012 00000001 00000000  ................
[    1.563630] [Hardware Error]:   00000030: 00000000 00000076                    ....v...
[    1.570417] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.581221] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.587131] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.593032] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[    1.597961] ALSA device list:
[    1.604810]   No soundcards found.
[    1.612189] Freeing unused kernel memory: 6144K
[    1.653991] Run /init as init process
[    1.659822]   with arguments:
[    1.659825]     /init
[    1.659827]   with environment:
[    1.659829]     HOME=/
[    1.659831]     TERM=linux
[    1.659833]     BOOT_IMAGE=(hd1,msdos1)/Image.gz
[    1.734519] hub 5-1:1.0: USB hub found
[    1.740564] hub 5-1:1.0: 4 ports detected
[    1.865256] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    1.900743] udevd[191]: starting version 3.2.9
[    1.907167] random: udevd: uninitialized urandom read (16 bytes read)
[    1.911593] random: udevd: uninitialized urandom read (16 bytes read)
[    1.915578] random: udevd: uninitialized urandom read (16 bytes read)
[    1.931444] udevd[192]: starting eudev-3.2.9
[    2.023648] hub 6-1:1.0: USB hub found
[    2.030414] hub 6-1:1.0: 4 ports detected
[    2.077945] usb 5-1.1: new high-speed USB device number 3 using xhci-hcd
[    2.246421] hub 5-1.1:1.0: USB hub found
[    2.252287] hub 5-1.1:1.0: 4 ports detected
[    2.353941] usb 5-1.4: new high-speed USB device number 4 using xhci-hcd
[    2.476896] usb-storage 5-1.4:1.0: USB Mass Storage device detected
[    2.482954] scsi host0: usb-storage 5-1.4:1.0
[    2.566126] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    2.593465] usb-storage 6-1.1:1.0: USB Mass Storage device detected
[    2.599589] scsi host1: usb-storage 6-1.1:1.0
[    2.773948] usb 5-1.1.2: new high-speed USB device number 5 using xhci-hcd
[    3.213989] usb 6-1.2: new SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[    3.414422] usb 6-1.2: reset SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[    3.446773] random: fast init done
[    3.476740] r8152 6-1.2:1.0: load rtl8153a-3 v2 02/07/20 successfully
[    3.520149] scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
[    3.525987] r8152 6-1.2:1.0 eth0: v1.11.11
[    3.527138] sd 0:0:0:0: [sda] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
[    3.538739] sd 0:0:0:0: [sda] Write Protect is off
[    3.544732] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    3.545412] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.575929]  sda: sda1
[    3.578272] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    3.614737] scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   1532 PQ: 0 ANSI: 6
[    3.615001] urandom_read: 3 callbacks suppressed
[    3.615009] random: dd: uninitialized urandom read (512 bytes read)
[    3.661619] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
[    3.665758] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
[    4.033843] sd 1:0:0:0: [sdb] 125042688 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    4.040364] sd 1:0:0:0: [sdb] Write Protect is off
[    4.040370] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[    4.040831] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.073608] Alternate GPT is invalid, using primary GPT.
[    4.079721]  sdb: sdb1 sdb2 sdb3
[    4.085806] sdb: partition table partially beyond EOD, enabling native capacity
[    4.098814] Alternate GPT is invalid, using primary GPT.
[    4.105015]  sdb: sdb1 sdb2 sdb3
[    4.111180] sdb: partition table partially beyond EOD, truncated
[    4.119319] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    6.039143] r8152 6-1.2:1.0 eth0: carrier on
[   62.430046] cfg80211: failed to load regulatory.db
[   80.793925] r8152 6-1.2:1.0 eth0: carrier off
[   83.351146] r8152 6-1.2:1.0 eth0: carrier on
[   96.926052] random: crng init done
[   96.932203] random: 1 urandom warning(s) missed due to ratelimiting
[  104.749180] usb 6-1.2: USB disconnect, device number 4
[  106.809994] usb 6-1.2: new SuperSpeed Gen 1 USB device number 5 using xhci-hcd
[  106.998427] usb 6-1.2: reset SuperSpeed Gen 1 USB device number 5 using xhci-hcd
[  107.056694] r8152 6-1.2:1.0: load rtl8153a-3 v2 02/07/20 successfully
[  107.090484] r8152 6-1.2:1.0 eth0: v1.11.11
[  109.607149] r8152 6-1.2:1.0 eth0: carrier on
[  144.089952] usb 5-1.3: new low-speed USB device number 6 using xhci-hcd
[  144.298399] input: Dell Dell USB Entry Keyboard as /devices/platform/QCOM0497:01/dwc3.6.auto/xhci-hcd.7.auto/usb5/5-1/5-1.3/5-1.3:1.0/0003:413C:2107.0001/input/input1
[  144.362179] hid-generic 0003:413C:2107.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-xhci-hcd.7.auto-1.3/input0