Created
July 29, 2017 04:51
-
-
Save dhess/74d8304344f5ef218b2d0ad950b08a3d to your computer and use it in GitHub Desktop.
2017-07-28 aarch64 image on Jetson TX1
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [0000.160] [TegraBoot] (version 00.00.2014.50-mobile-d44d4bf0) | |
| [0000.166] Processing in cold boot mode Bootloader 2 | |
| [0000.170] A02 Bootrom Patch rev = 63 | |
| [0000.174] Power-up reason: reset button | |
| [0000.177] No Battery Present | |
| [0000.180] RamCode = 0 | |
| [0000.182] Platform has Ddr4 type ram | |
| [0000.186] max77620 disabling SD1 Remote Sense | |
| [0000.190] Setting Ddr voltage to 1125mv | |
| [0000.194] Serial Number of Pmic Max77663: 0x2712ae | |
| [0000.201] Entering ramdump check | |
| [0000.204] Get RamDumpCarveOut = 0xff23f000 | |
| [0000.208] RamDumpCarveOut=0xff23f000, RamDumperFlag=0x0 | |
| [0000.213] Last reboot was clean, booting normally! | |
| [0000.218] Sdram initialization is successful | |
| [0000.222] SecureOs Carveout Base=0xff800000 Size=0x00800000 | |
| [0000.228] GSC1 Carveout Base=0xff700000 Size=0x00100000 | |
| [0000.233] GSC2 Carveout Base=0xff600000 Size=0x00100000 | |
| [0000.238] GSC3 Carveout Base=0xff500000 Size=0x00100000 | |
| [0000.243] GSC4 Carveout Base=0xff400000 Size=0x00100000 | |
| [0000.248] GSC5 Carveout Base=0xff300000 Size=0x00100000 | |
| [0000.253] BpmpFw Carveout Base=0xff2c0000 Size=0x00040000 | |
| [0000.259] Lp0 Carveout Base=0xff2bf000 Size=0x00001000 | |
| [0000.274] RamDump Carveout Base=0xff23f000 Size=0x00080000 | |
| [0000.279] Platform-DebugCarveout: 0 | |
| [0000.283] Nck Carveout Base=0xff03f000 Size=0x00200000 | |
| [0000.288] Non secure mode, and RB not enabled. | |
| [0000.338] Using GPT Primary to query partitions | |
| [0000.343] Loading Tboot-CPU binary | |
| [0000.392] Verifying bootloader in OdmNonSecureSBK mode | |
| [0000.402] Bootloader load address is 0xa0000000, entry address is 0xa0000258 | |
| [0000.409] Bootloader downloaded successfully. | |
| [0000.413] Downloaded Tboot-CPU binary to 0xa0000258 | |
| [0000.418] MAX77620_GPIO1 Configured. | |
| [0000.422] MAX77620_GPIO5 Configured. | |
| [0000.425] CPU power rail is up | |
| [0000.428] CPU clock enabled | |
| [0000.432] Performing RAM repair | |
| [0000.435] Updating A64 Warmreset Address to 0xa00002e9 | |
| [0000.463] Bootloader DTB Load Address: 0x83000000 | |
| [0000.491] Kernel DTB Load Address: 0x83100000 | |
| [0000.496] Loading cboot binary | |
| [0000.590] Verifying bootloader in OdmNonSecureSBK mode | |
| [0000.628] Bootloader load address is 0x92c00000, entry address is 0x92c00258 | |
| [0000.635] Bootloader downloaded successfully. | |
| [0000.639] GPT: Partition NOT found ! | |
| [0000.643] Find Partition via GPT Failed | |
| [0000.646] Find Partition via PT Failed | |
| [0000.650] function NvTbootGetBinaryOffsets: 0x1 error | |
| [0000.655] Error in NvTbootLoadBinary: 0x1 ! | |
| [0000.659] Next binary entry address: 0x92c00258 | |
| [0000.663] BoardId: 2180 | |
| [0000.668] dram memory type is 3 | |
| [0000.672] WB0 init successful | |
| [0000.698] Bpmp FW successfully loaded | |
| [0000.701] Set NvDecSticky Bits | |
| [0000.705] GSC1 address : ff700000 | |
| [0000.708] GSC2 address ff63fffc value c0edbbcc | |
| [0000.713] GSC2 address : ff600000 | |
| [0000.717] GSC3 address : ff500000 | |
| [0000.720] GSC4 address : ff400000 | |
| [0000.724] GSC5 address : ff300000 | |
| [0000.727] GSC MC Settings done | |
| [0000.731] TOS plaintext Image length 28752 | |
| [0000.735] Monitor size 28752 | |
| [0000.738] OS size 0 | |
| [0000.741] *** Secure OS image signature not verified *** | |
| [0000.746] Loading and Validation of Secure OS Successful | |
| [0000.751] NvTbootPackSdramParams: start. | |
| [0000.756] NvTbootPackSdramParams: done. | |
| [0000.760] Tegraboot started after 139545 us | |
| [0000.764] Basic modules init took 311173 us | |
| [0000.768] Sec Bootdevice Read Time = 216 ms, Read Size = 9476 KB | |
| [0000.774] Sec Bootdevice Write Time = -1940251271 ms, Write Size = -68719477 KB | |
| [0000.781] Next stage binary read took 23848 us | |
| [0000.785] Carveout took 207267 us | |
| [0000.788] CPU initialization took 96700 us | |
| [0000.792] Total time taken by TegraBoot 638988 us | |
| [0000.797] Starting CPU & Halting co-processor | |
| 64NOTICE: BL31: v1.2(release):cc5fd7c | |
| NOTICE: BL31: Built : 00:37:02, Jul 20 2017 | |
| NOTICE: Trusty image missing. | |
| ERROR: Error initializing runtime service trusty_fast | |
| [0000.937] RamCode = 0 | |
| [0000.959] LPDDR4 Training: Read DT: Number of tables = 10 | |
| [0000.964] EMC Training (SRC-freq: 204000; DST-freq: 40800) | |
| [0000.969] EMC Training Skipped | |
| [0000.972] EMC Training (SRC-freq: 204000; DST-freq: 68000) | |
| [0000.977] EMC Training Skipped | |
| [0000.980] EMC Training (SRC-freq: 204000; DST-freq: 102000) | |
| [0000.985] EMC Training Skipped | |
| [0000.988] EMC Training (SRC-freq: 204000; DST-freq: 204000) | |
| [0000.993] EMC Training Skipped | |
| [0000.996] EMC Training (SRC-freq: 204000; DST-freq: 408000) | |
| [0001.002] EMC Training Successful | |
| [0001.005] EMC Training (SRC-freq: 204000; DST-freq: 665600) | |
| [0001.011] EMC Training Successful | |
| [0001.014] EMC Training (SRC-freq: 204000; DST-freq: 800000) | |
| [0001.025] EMC Training Successful | |
| [0001.028] EMC Training (SRC-freq: 204000; DST-freq: 1065600) | |
| [0001.051] EMC Training Successful | |
| [0001.054] EMC Training (SRC-freq: 204000; DST-freq: 1331200) | |
| [0001.076] EMC Training Successful | |
| [0001.079] EMC Training (SRC-freq: 204000; DST-freq: 1600000) | |
| [0001.098] EMC Training Successful | |
| [0001.102] Switching to 800000 KHz Success | |
| [0001.111] RamCode = 0 | |
| [0001.115] DT Write: emc-table@40800 succeeded | |
| [0001.121] DT Write: emc-table@68000 succeeded | |
| [0001.127] DT Write: emc-table@102000 succeeded | |
| [0001.133] DT Write: emc-table@204000 succeeded | |
| [0001.139] DT Write: emc-table@408000 succeeded | |
| [0001.146] DT Write: emc-table@665600 succeeded | |
| [0001.152] DT Write: emc-table@800000 succeeded | |
| [0001.158] DT Write: emc-table@1065600 succeeded | |
| [0001.164] DT Write: emc-table@1331200 succeeded | |
| [0001.170] DT Write: emc-table@1600000 succeeded | |
| [0001.174] LPDDR4 Training: Write DT: Number of tables = 10 | |
| [0001.209] | |
| [0001.210] Debug Init done | |
| [0001.213] Marked DTB cacheable | |
| [0001.216] Bootloader DTB loaded at 0x83000000 | |
| [0001.221] Marked DTB cacheable | |
| [0001.224] Kernel DTB loaded at 0x83100000 | |
| [0001.228] DeviceTree Init done | |
| [0001.247] Pinmux applied successfully | |
| [0001.253] gicd_base: 0x50041000 | |
| [0001.257] gicc_base: 0x50042000 | |
| [0001.260] Interrupts Init done | |
| [0001.266] Using base:0x60005008 & irq:33 for tick-timer | |
| [0001.271] Using base:0x60005000 for delay-timer | |
| [0001.275] platform_init_timer: DONE | |
| [0001.279] Timer(tick) Init done | |
| [0001.284] osc freq = 38400 khz | |
| [0001.290] | |
| [0001.291] welcome to cboot | |
| [0001.293] | |
| [0001.294] Cboot Version: 00.00.2014.50-t210-fadd1be5 | |
| [0001.299] calling constructors | |
| [0001.302] initializing heap | |
| [0001.305] initializing threads | |
| [0001.308] initializing timers | |
| [0001.311] creating bootstrap completion thread | |
| [0001.315] top of bootstrap2() | |
| [0001.318] CPU: ARM Cortex A57 | |
| [0001.321] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 | |
| [0001.326] initializing platform | |
| [0001.372] config for ddr50 mode completed | |
| [0001.376] sdmmc bdev is already initialized | |
| [0001.380] Enable APE clock | |
| [0001.383] Un-powergate APE partition | |
| [0001.386] of_register: registering tegra_udc to of_hal | |
| [0001.391] of_register: registering inv20628-driver to of_hal | |
| [0001.397] of_register: registering ads1015-driver to of_hal | |
| [0001.402] of_register: registering lp8557-bl-driver to of_hal | |
| [0001.408] of_register: registering bq2419x_charger to of_hal | |
| [0001.414] of_register: registering cpc to of_hal | |
| [0001.418] of_register: registering bq27441_fuel_gauge to of_hal | |
| [0001.438] gpio framework initialized | |
| [0001.441] of_register: registering tca9539_gpio to of_hal | |
| [0001.447] of_register: registering tca9539_gpio to of_hal | |
| [0001.452] of_register: registering i2c_bus_driver to of_hal | |
| [0001.458] of_register: registering i2c_bus_driver to of_hal | |
| [0001.463] of_register: registering i2c_bus_driver to of_hal | |
| [0001.469] pmic framework initialized | |
| [0001.472] of_register: registering max77620_pmic to of_hal | |
| [0001.478] regulator framework initialized | |
| [0001.482] of_register: registering tegra_xhci to of_hal | |
| [0001.487] initializing target | |
| [0001.496] gpio_driver_register: register 'tegra_gpio_driver' driver | |
| [0001.507] fixed regulator driver initialized | |
| [0001.579] initializing OF layer | |
| [0001.582] NCK carveout not present | |
| [0001.585] Skipping dts_overrides | |
| [0001.589] of_children_init: Ops found for compatible string nvidia,tegra210-xhci | |
| [0001.598] of_children_init: Ops found for compatible string nvidia,tegra210-i2c | |
| [0001.628] I2C Bus Init done | |
| [0001.631] of_children_init: Ops found for compatible string nvidia,tegra210-i2c | |
| [0001.646] I2C Bus Init done | |
| [0001.649] of_children_init: Ops found for compatible string ti,tca9539 | |
| [0001.663] tca9539_init: i2c bus: 2, slave addr: 0xe8 | |
| [0001.668] gpio_driver_register: register 'tca9539_gpio_driver' driver | |
| [0001.675] of_children_init: Ops found for compatible string ti,tca9539 | |
| [0001.689] tca9539_init: i2c bus: 2, slave addr: 0xee | |
| [0001.694] gpio_driver_register: register 'tca9539_gpio_driver' driver | |
| [0001.701] of_children_init: Ops found for compatible string nvidia,tegra210-i2c | |
| [0001.716] I2C Bus Init done | |
| [0001.718] of_children_init: Ops found for compatible string nvidia,tegra210-i2c | |
| [0001.733] I2C Bus Init done | |
| [0001.736] of_children_init: Ops found for compatible string nvidia,tegra210-i2c | |
| [0001.751] I2C Bus Init done | |
| [0001.754] of_children_init: Ops found for compatible string maxim,max77620 | |
| [0001.769] max77620_init using irq 118 | |
| [0001.774] register 'maxim,max77620' pmic | |
| [0001.779] gpio_driver_register: register 'max77620-gpio' driver | |
| [0001.785] of_children_init: Ops found for compatible string nvidia,tegra210-i2c | |
| [0001.800] I2C Bus Init done | |
| [0001.805] NCK carveout not present | |
| [0001.808] shim_invoke: No NCT, Calling dts updates | |
| [0001.829] Find /i2c@7000c000's alias i2c0 | |
| [0001.833] get eeprom at 1-a2, size 256, type 0 | |
| [0001.837] get eeprom at 1-ae, size 256, type 0 | |
| [0001.853] Find /i2c@7000c400's alias i2c1 | |
| [0001.857] get eeprom at 2-a0, size 256, type 0 | |
| [0001.872] Find /i2c@7000c500's alias i2c2 | |
| [0001.876] get eeprom at 3-a0, size 256, type 0 | |
| [0001.880] get eeprom at 3-ae, size 256, type 0 | |
| [0001.892] Find /host1x/i2c@546c0000's alias i2c6 | |
| [0001.897] get eeprom at 7-a8, size 256, type 0 | |
| [0001.901] pm_ids_update: Updating 1,a2, size 256, type 0 | |
| [0001.906] I2C slave not started | |
| [0001.909] I2C write failed | |
| [0001.912] Writing offset failed | |
| [0001.915] eeprom_init: EEPROM read failed | |
| [0001.919] pm_ids_update: eeprom init failed | |
| [0001.923] pm_ids_update: Updating 1,ae, size 256, type 0 | |
| [0001.928] I2C slave not started | |
| [0001.931] I2C write failed | |
| [0001.934] Writing offset failed | |
| [0001.937] eeprom_init: EEPROM read failed | |
| [0001.941] pm_ids_update: eeprom init failed | |
| [0001.945] pm_ids_update: Updating 2,a0, size 256, type 0 | |
| [0001.950] I2C slave not started | |
| [0001.953] I2C write failed | |
| [0001.956] Writing offset failed | |
| [0001.959] eeprom_init: EEPROM read failed | |
| [0001.963] pm_ids_update: eeprom init failed | |
| [0001.967] pm_ids_update: Updating 3,a0, size 256, type 0 | |
| [0001.997] pm_ids_update: The pm board id is 2180-1000-400 | |
| [0002.006] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 | |
| [0002.016] pm_ids_update: pm id update successful | |
| [0002.021] pm_ids_update: Updating 3,ae, size 256, type 0 | |
| [0002.051] pm_ids_update: The pm board id is 2597-0000-500 | |
| [0002.059] Adding plugin-manager/ids/2597-0000-500=/i2c@7000c500:module@0x57 | |
| [0002.067] pm_ids_update: pm id update successful | |
| [0002.072] pm_ids_update: Updating 7,a8, size 256, type 0 | |
| [0002.080] I2C slave not started | |
| [0002.083] I2C write failed | |
| [0002.085] Writing offset failed | |
| [0002.088] eeprom_init: EEPROM read failed | |
| [0002.092] pm_ids_update: eeprom init failed | |
| [0002.126] updating /chosen/nvidia,wifi-mac node 00:04:4b:63:54:93 | |
| [0002.135] updating /chosen/nvidia,bluetooth-mac node 00:04:4b:63:54:94 | |
| [0002.145] updating /chosen/nvidia,ethernet-mac node 00:04:4b:63:54:95 | |
| [0002.151] Plugin Manager: Parse ODM data 0x00084000 | |
| [0002.186] Find /i2c@7000c000's alias i2c0 | |
| [0002.190] get eeprom at 1-a2, size 256, type 0 | |
| [0002.194] get eeprom at 1-ae, size 256, type 0 | |
| [0002.210] Find /i2c@7000c400's alias i2c1 | |
| [0002.214] get eeprom at 2-a0, size 256, type 0 | |
| [0002.229] Find /i2c@7000c500's alias i2c2 | |
| [0002.233] get eeprom at 3-a0, size 256, type 0 | |
| [0002.238] get eeprom at 3-ae, size 256, type 0 | |
| [0002.249] Find /host1x/i2c@546c0000's alias i2c6 | |
| [0002.254] get eeprom at 7-a8, size 256, type 0 | |
| [0002.258] pm_ids_update: Updating 1,a2, size 256, type 0 | |
| [0002.263] I2C slave not started | |
| [0002.266] I2C write failed | |
| [0002.269] Writing offset failed | |
| [0002.272] eeprom_init: EEPROM read failed | |
| [0002.276] pm_ids_update: eeprom init failed | |
| [0002.280] pm_ids_update: Updating 1,ae, size 256, type 0 | |
| [0002.285] I2C slave not started | |
| [0002.288] I2C write failed | |
| [0002.291] Writing offset failed | |
| [0002.294] eeprom_init: EEPROM read failed | |
| [0002.298] pm_ids_update: eeprom init failed | |
| [0002.302] pm_ids_update: Updating 2,a0, size 256, type 0 | |
| [0002.307] I2C slave not started | |
| [0002.310] I2C write failed | |
| [0002.313] Writing offset failed | |
| [0002.316] eeprom_init: EEPROM read failed | |
| [0002.320] pm_ids_update: eeprom init failed | |
| [0002.324] pm_ids_update: Updating 3,a0, size 256, type 0 | |
| [0002.354] pm_ids_update: The pm board id is 2180-1000-400 | |
| [0002.362] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 | |
| [0002.369] pm_ids_update: pm id update successful | |
| [0002.374] pm_ids_update: Updating 3,ae, size 256, type 0 | |
| [0002.404] pm_ids_update: The pm board id is 2597-0000-500 | |
| [0002.411] Adding plugin-manager/ids/2597-0000-500=/i2c@7000c500:module@0x57 | |
| [0002.418] pm_ids_update: pm id update successful | |
| [0002.423] pm_ids_update: Updating 7,a8, size 256, type 0 | |
| [0002.430] I2C slave not started | |
| [0002.433] I2C write failed | |
| [0002.436] Writing offset failed | |
| [0002.439] eeprom_init: EEPROM read failed | |
| [0002.443] pm_ids_update: eeprom init failed | |
| [0002.477] Chip UID is 000000016410578000000000120485c0 | |
| [0002.484] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03223160898500c08504 androidboot.security=non-secure | |
| [0002.508] Add serial number:03223160898500c08504 as DT property | |
| [0002.516] calling apps_init() | |
| [0002.520] Found 18 GPT partitions in "sdmmc3_user" | |
| [0002.525] Proceeding to Cold Boot | |
| [0002.528] starting app android_boot_app | |
| [0002.532] Device state: unlocked | |
| [0002.535] display console init | |
| [0002.541] skip-display-init in bootloader | |
| [0002.545] set_instance_and_out_type: invalid out_type | |
| [0002.550] display_console_init: No display init | |
| [0002.560] Gpio keyboard init success | |
| [0002.563] bct_init bctinit | |
| [0002.566] device_query_partition_size: failed to open partition sdmmc3_user:BMP ! | |
| [0002.574] BMP partition read failed! | |
| [0002.577] blob_init: blob-partition BMP DT entry for leds-pwm not found | |
| h[0002.592] eader read failed | |
| [0002.595] load_bmp_blob: BMP blob initialization failed | |
| [0002.600] Could not load/initialize BMP blob...ignoring | |
| [0002.605] bl_battery_charging: connected to external power supply | |
| [0002.616] fastboot: usb cable is not connected | |
| [0002.620] display_console_ioctl: No display init | |
| [0002.625] switch_backlight failed | |
| [0002.628] bct_init bctinit | |
| [0002.631] device_query_partition_size: failed to open partition sdmmc3_user:MSC ! | |
| [0002.638] MSC Partition not found | |
| [0002.642] bct_init bctinit | |
| [0002.644] bct_init bctinit | |
| [0002.648] blob_init: USP partition does not have valid Blob | |
| [0002.653] Loading android kernel | |
| [0002.657] Default: NOT skip verified boot. | |
| [0002.661] Verified boot state = Orange | |
| [0002.668] display_console_clear: No display init | |
| [0002.672] kernel load address: 0x80080000, size: 503741 bytes | |
| [0002.678] ramdisk load address: 0x84100000, size: 0 bytes | |
| [0002.683] load kernel from storage | |
| [0002.688] decompressor handler not found | |
| [0002.698] Successfully loaded kernel and ramdisk images | |
| [0002.706] bct_init bctinit | |
| [0002.708] device_query_partition_size: failed to open partition sdmmc3_user:BMP ! | |
| [0002.716] BMP partition read failed! | |
| [0002.719] blob_init: blob-partition BMP header read failed | |
| [0002.725] load_bmp_blob: BMP blob initialization failed | |
| [0002.730] bmp blob is not loaded and initialized | |
| [0002.734] Failed to display boot-logo | |
| [0002.738] NCK carveout not present | |
| [0002.741] Skipping dts_overrides | |
| [0002.744] NCK carveout not present | |
| [0002.748] shim_invoke: No NCT, Calling dts updates | |
| [0002.769] Find /i2c@7000c000's alias i2c0 | |
| [0002.773] get eeprom at 1-a2, size 256, type 0 | |
| [0002.778] get eeprom at 1-ae, size 256, type 0 | |
| [0002.794] Find /i2c@7000c400's alias i2c1 | |
| [0002.797] get eeprom at 2-a0, size 256, type 0 | |
| [0002.814] Find /i2c@7000c500's alias i2c2 | |
| [0002.818] get eeprom at 3-a0, size 256, type 0 | |
| [0002.822] get eeprom at 3-ae, size 256, type 0 | |
| [0002.834] Find /host1x/i2c@546c0000's alias i2c6 | |
| [0002.839] get eeprom at 7-a8, size 256, type 0 | |
| [0002.843] pm_ids_update: Updating 1,a2, size 256, type 0 | |
| [0002.848] I2C slave not started | |
| [0002.851] I2C write failed | |
| [0002.854] Writing offset failed | |
| [0002.857] eeprom_init: EEPROM read failed | |
| [0002.861] pm_ids_update: eeprom init failed | |
| [0002.865] pm_ids_update: Updating 1,ae, size 256, type 0 | |
| [0002.870] I2C slave not started | |
| [0002.873] I2C write failed | |
| [0002.876] Writing offset failed | |
| [0002.879] eeprom_init: EEPROM read failed | |
| [0002.883] pm_ids_update: eeprom init failed | |
| [0002.887] pm_ids_update: Updating 2,a0, size 256, type 0 | |
| [0002.892] I2C slave not started | |
| [0002.895] I2C write failed | |
| [0002.898] Writing offset failed | |
| [0002.901] eeprom_init: EEPROM read failed | |
| [0002.905] pm_ids_update: eeprom init failed | |
| [0002.909] pm_ids_update: Updating 3,a0, size 256, type 0 | |
| [0002.939] pm_ids_update: The pm board id is 2180-1000-400 | |
| [0002.948] Adding plugin-manager/ids/2180-1000-400=/i2c@7000c500:module@0x50 | |
| [0002.958] pm_ids_update: pm id update successful | |
| [0002.963] pm_ids_update: Updating 3,ae, size 256, type 0 | |
| [0002.993] pm_ids_update: The pm board id is 2597-0000-500 | |
| [0003.001] Adding plugin-manager/ids/2597-0000-500=/i2c@7000c500:module@0x57 | |
| [0003.010] pm_ids_update: pm id update successful | |
| [0003.014] pm_ids_update: Updating 7,a8, size 256, type 0 | |
| [0003.022] I2C slave not started | |
| [0003.025] I2C write failed | |
| [0003.027] Writing offset failed | |
| [0003.030] eeprom_init: EEPROM read failed | |
| [0003.034] pm_ids_update: eeprom init failed | |
| [0003.068] updating /chosen/nvidia,wifi-mac node 00:04:4b:63:54:93 | |
| [0003.077] updating /chosen/nvidia,bluetooth-mac node 00:04:4b:63:54:94 | |
| [0003.087] updating /chosen/nvidia,ethernet-mac node 00:04:4b:63:54:95 | |
| [0003.093] Plugin Manager: Parse ODM data 0x00084000 | |
| [0003.115] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03223160898500c08504 androidboot.security=non-secure | |
| [0003.138] Add serial number:03223160898500c08504 as DT property | |
| [0003.147] Updated bpmp info to DTB | |
| [0003.153] Updated initrd info to DTB | |
| [0003.157] "proc-board" doesn't exist, creating | |
| [0003.164] Updated board info to DTB | |
| [0003.168] "pmu-board" doesn't exist, creating | |
| [0003.175] Updated board info to DTB | |
| [0003.178] "display-board" doesn't exist, creating | |
| [0003.185] Updated board info to DTB | |
| [0003.188] "reset" doesn't exist, creating | |
| [0003.193] Updated reset info to DTB | |
| [0003.197] display_console_ioctl: No display init | |
| [0003.201] display_console_ioctl: No display init | |
| [0003.206] display_console_ioctl: No display init | |
| [0003.213] display_console_ioctl: No display init | |
| [0003.220] Cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 androidboot.modem=none androidboot.serialno=03223160898500c08504 androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1075 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootloader=00.00.2014.50-t210-fadd1be5 androidboot.verifiedbootstate=orange | |
| [0003.294] Updated bootarg info to DTB | |
| [0003.300] Updated memory info to DTB | |
| [0003.309] set vdd_core voltage to 1075 mv | |
| [0003.313] setting 'vdd-core' regulator to 1075000 micro volts | |
| [0003.319] nvdumper Carveout: Base = 0xff23f000 and Size = 0x80000 | |
| [0003.326] bct_init bctinit | |
| [0003.328] Starting Bpmp FW | |
| [0003.331] BPMP-FW Carveout: Base = 0xff2c0000 and Size = 0x40000 | |
| U-Boot 2016.07-g0ce7ca2 (Jul 20 2017 - 00:37:03 -0700) | |
| TEGRA210 | |
| Model: NVIDIA P2371-2180 | |
| Board: NVIDIA P2371-2180 | |
| DRAM: 4 GiB | |
| MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Net: No ethernet found. | |
| Hit any key to stop autoboot: 0 | |
| Tegra210 (P2371-2180) # printenv fdtfile | |
| fdtfile=nvidia/tegra210-p2371-2180.dtb | |
| Tegra210 (P2371-2180) # printenv fdt_copy_node_names | |
| fdt_copy_node_names=/cpus:/psci | |
| Tegra210 (P2371-2180) # boot | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| Scanning mmc 1:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| reading /extlinux/extlinux.conf | |
| 730 bytes read in 15 ms (46.9 KiB/s) | |
| ------------------------------------------------------------ | |
| 1: NixOS - Default | |
| Enter choice: 1: NixOS - Default | |
| Retrieving file: /extlinux/../nixos/yhz56rkvsfavblc0f11har2mnx5ydasa-initrd-initrd | |
| reading /extlinux/../nixos/yhz56rkvsfavblc0f11har2mnx5ydasa-initrd-initrd | |
| 4270559 bytes read in 218 ms (18.7 MiB/s) | |
| Retrieving file: /extlinux/../nixos/3mh9x2chf56936vsm0f16h6kawlc6fra-linux-4.12.4-Image | |
| reading /extlinux/../nixos/3mh9x2chf56936vsm0f16h6kawlc6fra-linux-4.12.4-Image | |
| 25434624 bytes read in 1153 ms (21 MiB/s) | |
| append: systemConfig=/nix/store/4dmy3c51dyq7cw7ay8frw05km2m701ba-nixos-system-nixos-17.09pre-git init=/nix/store/4dmy3c51dyq7cw7ay8frw05km2m701ba-nixos-system-nixos-17.09pre-git/init loglevel=7 console=ttyS0,115200n8 console=tty0 | |
| Retrieving file: /extlinux/../nixos/3mh9x2chf56936vsm0f16h6kawlc6fra-linux-4.12.4-dtbs/nvidia/tegra210-p2371-2180.dtb | |
| reading /extlinux/../nixos/3mh9x2chf56936vsm0f16h6kawlc6fra-linux-4.12.4-dtbs/nvidia/tegra210-p2371-2180.dtb | |
| 53498 bytes read in 43 ms (1.2 MiB/s) | |
| ## Flattened Device Tree blob at 82000000 | |
| Booting using the fdt blob at 0x82000000 | |
| Using Device Tree in place at 0000000082000000, end 00000000820100f9 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Linux version 4.12.4 (nixbld1@hikey) (gcc version 5.4.0 (GCC) ) #1-NixOS SMP PREEMPT Thu Jul 27 22:10:39 UTC 2017 | |
| [ 0.000000] Boot CPU: AArch64 Processor [411fd071] | |
| [ 0.000000] Machine model: NVIDIA Jetson TX1 Developer Kit | |
| [ 0.000000] efi: Getting EFI parameters from FDT: | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] cma: Reserved 16 MiB at 0x00000000fdc00000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000017fffffff] | |
| [ 0.000000] NUMA: Adding memblock [0x80000000 - 0xfedfffff] on node 0 | |
| [ 0.000000] NUMA: Adding memblock [0x100000000 - 0x17fffffff] on node 0 | |
| [ 0.000000] NUMA: Initmem setup node 0 [mem 0x80000000-0x17fffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0x17ff9f880-0x17ffa137f] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fedfffff] | |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017fffffff] | |
| [ 0.000000] /cpus/cpu@1: missing enable-method property | |
| [ 0.000000] /cpus/cpu@2: missing enable-method property | |
| [ 0.000000] /cpus/cpu@3: missing enable-method property | |
| [ 0.000000] percpu: Embedded 26 pages/cpu @ffff8000fff82000 s66072 r8192 d32232 u106496 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 | |
| [ 0.000000] CPU features: enabling workaround for ARM erratum 834220 | |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027584 | |
| [ 0.000000] Policy zone: Normal | |
| [ 0.000000] Kernel command line: systemConfig=/nix/store/4dmy3c51dyq7cw7ay8frw05km2m701ba-nixos-system-nixos-17.09pre-git init=/nix/store/4dmy3c51dyq7cw7ay8frw05km2m701ba-nixos-system-nixos-17.09pre-git/init loglevel=7 console=ttyS0,115200n8 console=tty0 | |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.000000] software IO TLB [mem 0xf9c00000-0xfdc00000] (64MB) mapped at [ffff800079c00000-ffff80007dbfffff] | |
| [ 0.000000] Memory: 3997812K/4175872K available (11196K kernel code, 2118K rwdata, 5148K rodata, 6336K init, 557K bss, 161676K reserved, 16384K cma-reserved) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) | |
| [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) | |
| [ 0.000000] .text : 0xffff000008080000 - 0xffff000008b70000 ( 11200 KB) | |
| [ 0.000000] .rodata : 0xffff000008b70000 - 0xffff000009080000 ( 5184 KB) | |
| [ 0.000000] .init : 0xffff000009080000 - 0xffff0000096b0000 ( 6336 KB) | |
| [ 0.000000] .data : 0xffff0000096b0000 - 0xffff0000098c1a00 ( 2119 KB) | |
| [ 0.000000] .bss : 0xffff0000098c1a00 - 0xffff00000994d1b4 ( 558 KB) | |
| [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB) | |
| [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) | |
| [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) | |
| [ 0.000000] 0xffff7e0000000000 - 0xffff7e0004000000 ( 64 MB actual) | |
| [ 0.000000] memory : 0xffff800000000000 - 0xffff800100000000 ( 4096 MB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| [ 0.000000] ftrace: allocating 41309 entries in 162 pages | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
| [ 0.000000] NR_IRQS:64 nr_irqs:64 0 | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000 | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
| [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
| [ 0.000163] Console: colour dummy device 80x25 | |
| [ 0.001065] console [tty0] enabled | |
| [ 0.001130] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) | |
| [ 0.001170] pid_max: default: 32768 minimum: 301 | |
| [ 0.001262] Security Framework initialized | |
| [ 0.001283] Yama: becoming mindful. | |
| [ 0.001348] AppArmor: AppArmor initialized | |
| [ 0.002595] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| [ 0.005526] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.006722] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.006762] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.019912] ASID allocator initialised with 65536 entries | |
| [ 0.038738] Speedo Revision 4 | |
| [ 0.038778] Tegra Revision: A02 SKU: 23 CPU Process: 0 SoC Process: -22 | |
| [ 0.039650] OF: ERROR: Bad of_node_put() on /pmc@7000e400/powergates/xusba | |
| [ 0.039681] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.4 #1-NixOS | |
| [ 0.039701] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) | |
| [ 0.039722] Call trace: | |
| [ 0.039751] [<ffff00000808a168>] dump_backtrace+0x0/0x290 | |
| [ 0.039776] [<ffff00000808a4d4>] show_stack+0x24/0x30 | |
| [ 0.039802] [<ffff0000084acda8>] dump_stack+0x98/0xb8 | |
| [ 0.039827] [<ffff0000089c14ec>] of_node_release+0xa4/0xa8 | |
| [ 0.039852] [<ffff0000084afb68>] kobject_put+0x90/0x1f8 | |
| [ 0.039874] [<ffff0000089c0784>] of_node_put+0x24/0x30 | |
| [ 0.039898] [<ffff0000089bbf3c>] __of_get_next_child+0x4c/0x70 | |
| [ 0.039921] [<ffff0000089bbfa0>] of_get_next_child+0x40/0x68 | |
| [ 0.039950] [<ffff0000090d72ec>] tegra_pmc_early_init+0x4f0/0x5b4 | |
| [ 0.039973] [<ffff00000808399c>] do_one_initcall+0x5c/0x168 | |
| [ 0.040000] [<ffff000009080dfc>] kernel_init_freeable+0xdc/0x248 | |
| [ 0.040026] [<ffff000008b522d0>] kernel_init+0x18/0x110 | |
| [ 0.040046] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 | |
| [ 0.040136] OF: ERROR: Bad of_node_put() on /pmc@7000e400/powergates/xusbc | |
| [ 0.040162] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.4 #1-NixOS | |
| [ 0.040182] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) | |
| [ 0.040200] Call trace: | |
| [ 0.040222] [<ffff00000808a168>] dump_backtrace+0x0/0x290 | |
| [ 0.040245] [<ffff00000808a4d4>] show_stack+0x24/0x30 | |
| [ 0.040268] [<ffff0000084acda8>] dump_stack+0x98/0xb8 | |
| [ 0.040289] [<ffff0000089c14ec>] of_node_release+0xa4/0xa8 | |
| [ 0.040312] [<ffff0000084afb68>] kobject_put+0x90/0x1f8 | |
| [ 0.040332] [<ffff0000089c0784>] of_node_put+0x24/0x30 | |
| [ 0.040355] [<ffff0000089bbf3c>] __of_get_next_child+0x4c/0x70 | |
| [ 0.040377] [<ffff0000089bbfa0>] of_get_next_child+0x40/0x68 | |
| [ 0.040401] [<ffff0000090d72ec>] tegra_pmc_early_init+0x4f0/0x5b4 | |
| [ 0.040424] [<ffff00000808399c>] do_one_initcall+0x5c/0x168 | |
| [ 0.040447] [<ffff000009080dfc>] kernel_init_freeable+0xdc/0x248 | |
| [ 0.040469] [<ffff000008b522d0>] kernel_init+0x18/0x110 | |
| [ 0.040490] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 | |
| [ 0.040647] EFI services will not be available. | |
| [ 0.056144] smp: Bringing up secondary CPUs ... | |
| [ 0.056168] smp: Brought up 1 node, 1 CPU | |
| [ 0.056188] SMP: Total of 1 processors activated. | |
| [ 0.056212] CPU features: detected feature: 32-bit EL0 Support | |
| [ 0.056302] CPU: All CPU(s) started at EL2 | |
| [ 0.056331] alternatives: patching kernel code | |
| [ 0.060571] devtmpfs: initialized | |
| [ 0.072313] DMI not present or invalid. | |
| [ 0.072497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.072554] futex hash table entries: 256 (order: 3, 32768 bytes) | |
| [ 0.073041] pinctrl core: initialized pinctrl subsystem | |
| [ 0.074803] NET: Registered protocol family 16 | |
| [ 0.080268] cpuidle: using governor menu | |
| [ 0.081053] vdso: 2 pages (1 code @ ffff000008b77000, 1 data @ ffff0000096b5000) | |
| [ 0.081095] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.082045] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.083351] Serial: AMBA PL011 UART driver | |
| [ 0.095960] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered | |
| [ 0.108493] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| [ 0.124600] ACPI: Interpreter disabled. | |
| [ 0.125500] VDD_3V3_SD: Failed to request enable GPIO204: -517 | |
| [ 0.125530] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 | |
| [ 0.125930] RTL_5V: Failed to request enable GPIO57: -517 | |
| [ 0.125956] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 | |
| [ 0.126049] USB_VBUS_EN1: Failed to request enable GPIO229: -517 | |
| [ 0.126074] reg-fixed-voltage regulators:regulator@9: Failed to register regulator: -517 | |
| [ 0.126476] vgaarb: loaded | |
| [ 0.126715] SCSI subsystem initialized | |
| [ 0.128618] usbcore: registered new interface driver usbfs | |
| [ 0.128676] usbcore: registered new interface driver hub | |
| [ 0.128738] usbcore: registered new device driver usb | |
| [ 0.129719] pca953x 0-0074: 0-0074 supply vcc not found, using dummy regulator | |
| [ 0.139258] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 0.139744] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.139766] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.139805] PTP clock support registered | |
| [ 0.139902] dmi: Firmware registration failed. | |
| [ 0.140772] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.144608] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.205824] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.205908] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.206190] AppArmor: AppArmor Filesystem Enabled | |
| [ 0.206317] pnp: PnP ACPI: disabled | |
| [ 0.212461] NET: Registered protocol family 2 | |
| [ 0.213038] TCP established hash table entries: 32768 (order: 6, 262144 bytes) | |
| [ 0.213389] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) | |
| [ 0.213666] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.213808] UDP hash table entries: 2048 (order: 4, 65536 bytes) | |
| [ 0.213882] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) | |
| [ 0.214049] NET: Registered protocol family 1 | |
| [ 0.222439] RPC: Registered named UNIX socket transport module. | |
| [ 0.222462] RPC: Registered udp transport module. | |
| [ 0.222481] RPC: Registered tcp transport module. | |
| [ 0.222500] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.222671] Trying to unpack rootfs image as initramfs... | |
| [ 0.489327] Freeing initrd memory: 4168K | |
| [ 0.489742] kvm [1]: 8-bit VMID | |
| [ 0.489765] kvm [1]: IDMAP page: 80b5b000 | |
| [ 0.489785] kvm [1]: HYP VA range: 800000000000:ffffffffffff | |
| [ 0.490782] kvm [1]: Hyp mode initialized successfully | |
| [ 0.490835] kvm [1]: vgic-v2@50044000 | |
| [ 0.490895] kvm [1]: vgic interrupt IRQ1 | |
| [ 0.490925] kvm [1]: virtual timer IRQ4 | |
| [ 0.493316] audit: initializing netlink subsys (disabled) | |
| [ 0.493792] audit: type=2000 audit(0.492:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.493866] workingset: timestamp_bits=44 max_order=20 bucket_order=0 | |
| [ 0.498766] zbud: loaded | |
| [ 0.504565] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.509234] NFS: Registering the id_resolver key type | |
| [ 0.509271] Key type id_resolver registered | |
| [ 0.509290] Key type id_legacy registered | |
| [ 0.509316] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.509455] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.512383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 0.516517] io scheduler noop registered | |
| [ 0.516538] io scheduler deadline registered | |
| [ 0.516689] io scheduler cfq registered (default) | |
| [ 0.516710] io scheduler mq-deadline registered | |
| [ 0.516729] io scheduler kyber registered | |
| [ 0.519120] usb2-0: usb2-0 supply vbus not found, using dummy regulator | |
| [ 0.519441] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 | |
| [ 0.536710] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels | |
| [ 0.538210] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. | |
| [ 0.538530] xenfs: not registering filesystem on non-xen platform | |
| [ 0.538889] of_pwm_get(): PWM chip not found | |
| [ 0.538915] pwm-regulator regulators:regulator@100: Failed to get PWM: -517 | |
| [ 0.541960] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.543516] console [ttyS0] disabled | |
| [ 0.543579] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 317, base_baud = 25500000) is a Tegra | |
| [ 1.690854] console [ttyS0] enabled | |
| [ 1.694799] SuperH (H)SCI(F) driver initialized | |
| [ 1.699703] msm_serial: driver initialized | |
| [ 1.704327] cacheinfo: Unable to detect cache hierarchy for CPU 0 | |
| [ 1.781859] brd: module loaded | |
| [ 1.822311] loop: module loaded | |
| [ 1.826843] max77620 1-003c: PMIC Version OTP:0x3C and ES:0x8 | |
| [ 1.839109] max77620-sd0: supplied by regulator-dummy | |
| [ 1.845595] max77620-sd1: supplied by regulator-dummy | |
| [ 1.851862] max77620-sd2: supplied by regulator-dummy | |
| [ 1.857880] max77620-sd3: supplied by regulator-dummy | |
| [ 1.864425] max77620-ldo0: supplied by regulator-dummy | |
| [ 1.870629] max77620-ldo1: supplied by regulator-dummy | |
| [ 1.876465] max77620-ldo2: supplied by regulator-dummy | |
| [ 1.882597] max77620-ldo3: supplied by regulator-dummy | |
| [ 1.887792] VDD_CAM_HV: Bringing 3100000uV into 2800000-2800000uV | |
| [ 1.894280] random: fast init done | |
| [ 1.898201] max77620-ldo4: supplied by regulator-dummy | |
| [ 1.903384] VDD_RTC: Bringing 1000000uV into 850000-850000uV | |
| [ 1.910080] max77620-ldo5: supplied by regulator-dummy | |
| [ 1.915263] VDD_TS_HV: Bringing 3100000uV into 3300000-3300000uV | |
| [ 1.922368] max77620-ldo6: supplied by regulator-dummy | |
| [ 1.927560] VDD_TS_1V8: Bringing 2800000uV into 1800000-1800000uV | |
| [ 1.934560] max77620-ldo7: supplied by regulator-dummy | |
| [ 1.940652] max77620-ldo8: supplied by regulator-dummy | |
| [ 1.949219] hisi_sas: driver version v1.6 | |
| [ 1.955675] libphy: Fixed MDIO Bus: probed | |
| [ 1.959994] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 1.965981] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| [ 1.971858] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 1.977847] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k | |
| [ 1.984840] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 1.990459] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k | |
| [ 1.998306] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 2.004546] sky2: driver version 1.30 | |
| [ 2.008675] VFIO - User Level meta-driver version: 0.3 | |
| [ 2.018943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 2.025535] ehci-pci: EHCI PCI platform driver | |
| [ 2.030040] ehci-platform: EHCI generic platform driver | |
| [ 2.035398] ehci-orion: EHCI orion driver | |
| [ 2.039514] ehci-exynos: EHCI EXYNOS driver | |
| [ 2.043801] ehci-msm: Qualcomm On-Chip EHCI Host Controller | |
| [ 2.049469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 2.055669] ohci-pci: OHCI PCI platform driver | |
| [ 2.060155] ohci-platform: OHCI generic platform driver | |
| [ 2.065485] ohci-exynos: OHCI EXYNOS driver | |
| [ 2.070019] usbcore: registered new interface driver usb-storage | |
| [ 2.208755] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 | |
| [ 2.217138] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 | |
| [ 2.224317] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock | |
| [ 2.230647] i2c /dev entries driver | |
| [ 2.236863] sdhci: Secure Digital Host Controller Interface driver | |
| [ 2.243059] sdhci: Copyright(c) Pierre Ossman | |
| [ 2.247705] Synopsys Designware Multimedia Card Interface Driver | |
| [ 2.254443] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 2.260427] sdhci-tegra 700b0000.sdhci: Got CD GPIO | |
| [ 2.280665] mmc0: Unknown controller version (3). You may experience problems. | |
| [ 2.332656] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit | |
| [ 2.344987] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.352181] usbcore: registered new interface driver usbhid | |
| [ 2.357872] usbhid: USB HID core driver | |
| [ 2.367037] NET: Registered protocol family 17 | |
| [ 2.371632] 9pnet: Installing 9P2000 support | |
| [ 2.375979] Key type dns_resolver registered | |
| [ 2.380787] registered taskstats version 1 | |
| [ 2.384968] zswap: loaded using pool lzo/zbud | |
| [ 2.389464] AppArmor: AppArmor sha1 policy hashing enabled | |
| [ 2.408089] VDD_5V0_SYS: supplied by VDD_SYS_MUX | |
| [ 2.413199] AVDD_DSI_CSI_1V2: supplied by AVDD_SYS_1V2 | |
| [ 2.419455] VDD_3V3_SYS: supplied by VDD_SYS_MUX | |
| [ 2.424908] VDD_3V3_SD: supplied by VDD_3V3_SYS | |
| [ 2.430926] VDD_DIS_3V3_LCD: supplied by VDD_3V3_SYS | |
| [ 2.437761] mmc0: new high speed MMC card at address 0001 | |
| [ 2.443218] VDD_LCD_1V8_DIS: supplied by VDD_1V8 | |
| [ 2.448196] RTL_5V: supplied by VDD_5V0_SYS | |
| [ 2.448478] USB_VBUS_EN1: supplied by VDD_5V0_SYS | |
| [ 2.458461] VDD_HDMI_5V0: supplied by VDD_5V0_SYS | |
| [ 2.463643] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 2.475168] mmcblk0: mmc0:0001 016G32 14.7 GiB | |
| [ 2.481645] usb2-0: usb2-0 supply vbus not found, using dummy regulator | |
| [ 2.488401] mmcblk0boot0: mmc0:0001 016G32 partition 1 4.00 MiB | |
| [ 2.494929] usb2-3: usb2-3 supply vbus not found, using dummy regulator | |
| [ 2.501673] mmcblk0boot1: mmc0:0001 016G32 partition 2 4.00 MiB | |
| [ 2.507996] usb3-0: usb3-0 supply vbus not found, using dummy regulator | |
| [ 2.514738] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB | |
| [ 2.521202] usb3-1: usb3-1 supply vbus not found, using dummy regulator | |
| [ 2.528017] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 | |
| [ 2.540399] of_pwm_get(): PWM chip not found | |
| [ 2.544722] pwm-regulator regulators:regulator@100: Failed to get PWM: -517 | |
| [ 2.552550] sdhci-tegra 700b0000.sdhci: Got CD GPIO | |
| [ 2.565701] mmc1: Unknown controller version (3). You may experience problems. | |
| [ 2.616723] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit | |
| [ 2.624883] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 2.637088] of_pwm_get(): PWM chip not found | |
| [ 2.641379] pwm-regulator regulators:regulator@100: Failed to get PWM: -517 | |
| [ 2.649046] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| [ 2.656732] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 2.672410] of_pwm_get(): PWM chip not found | |
| [ 2.676819] pwm-regulator regulators:regulator@100: Failed to get PWM: -517 | |
| [ 2.704043] max77686-rtc max77620-rtc: setting system clock to 2017-07-29 04:50:36 UTC (1501303836) | |
| [ 2.713773] AVDD_DSI_CSI_1V2: disabling | |
| [ 2.717681] VDD_PRE_REG_1V35: disabling | |
| [ 2.721597] VDD_PEX_1V05: disabling | |
| [ 2.725150] VDD_CAM_HV: disabling | |
| [ 2.728670] VDD_TS_HV: disabling | |
| [ 2.732079] VDD_TS_1V8: disabling | |
| [ 2.735468] AVDD_SATA_HDMI_DP_1V05: disabling | |
| [ 2.739890] RTL_5V: disabling | |
| [ 2.742923] USB_VBUS_EN1: disabling | |
| [ 2.746481] VDD_HDMI_5V0: disabling | |
| [ 2.750011] mmc1: host does not support reading read-only switch, assuming write-enable | |
| [ 2.758234] mmc1: new high speed SDXC card at address 59b4 | |
| [ 2.763988] ALSA device list: | |
| [ 2.766974] No soundcards found. | |
| [ 2.772656] mmcblk1: mmc1:59b4 5EHFP 59.7 GiB | |
| [ 2.778233] mmcblk1: p1 p2 | |
| [ 2.785258] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 2.798092] Freeing unused kernel memory: 6336K | |
| [ 2.810651] of_pwm_get(): PWM chip not found | |
| [ 2.817716] pwm-regulator regulators:regulator@100: Failed to get PWM: -517 | |
| [ 2.913392] systemd-udevd[159]: starting version 233 | |
| [ 4.274438] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 4.855053] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) | |
| [ 4.861750] booting system configuration /nix/store/4dmy3c51dyq7cw7ay8frw05km2m701ba-nixos-system-nixos-17.09pre-git | |
| [ 7.898171] NET: Registered protocol family 10 | |
| [ 7.907441] Segment Routing with IPv6 | |
| [ 7.927021] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 7.946187] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT -SELINUX +IMA +APPARMOR -SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN default-hierarchy=hybrid) | |
| [ 7.966838] systemd[1]: Detected architecture arm64. | |
| [ 7.974273] systemd[1]: Set hostname to <nixos>. | |
| [ 8.456740] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount. | |
| [ 8.465853] systemd[1]: Created slice System Slice. | |
| [ 8.473606] systemd[1]: Mounting Huge Pages File System... | |
| [ 8.484772] systemd[1]: Mounting Debug File System... | |
| [ 8.501231] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
| [ 8.512271] systemd[1]: Created slice User and Session Slice. | |
| [ 8.518546] systemd[1]: Reached target Slices. | |
| [ 8.713386] audit: type=1130 audit(1501303842.509:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 8.753795] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) | |
| [ 8.881249] audit: type=1130 audit(1501303842.677:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 8.959756] audit: type=1130 audit(1501303842.749:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 9.033871] audit: type=1130 audit(1501303842.752:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 9.186165] audit: type=1130 audit(1501303842.755:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 9.297218] audit: type=1127 audit(1501303843.048:7): pid=489 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success' | |
| [ 9.434375] audit: type=1130 audit(1501303843.230:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 9.511101] audit: type=1130 audit(1501303843.307:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 9.593065] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 9.637750] audit: type=1131 audit(1501303843.331:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 9.703662] systemd-journald[470]: Received request to flush runtime journal from PID 1 | |
| [ 9.787642] audit: type=1325 audit(1501303843.343:11): table=filter family=2 entries=0 | |
| [ 9.993759] systemd-journald[470]: File /var/log/journal/9c92f2554be744fdb2f9cf5e2bb5c8fe/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
| [ 10.697926] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
| [ 11.421404] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.447238] pwm-regulator: supplied by regulator-dummy | |
| [ 11.461073] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.547963] lp855x 0-002c: 0-002c supply power not found, using dummy regulator | |
| [ 11.613374] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.633001] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.651543] tegra-xusb 70090000.usb: 70090000.usb supply dvdd-pex-pll not found, using dummy regulator | |
| [ 11.651588] tegra-xusb 70090000.usb: 70090000.usb supply hvdd-pex-pll-e not found, using dummy regulator | |
| [ 11.749804] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.780336] tegra-xusb 70090000.usb: Firmware timestamp: 2015-08-10 09:47:54 UTC | |
| [ 11.780355] tegra-xusb 70090000.usb: xHCI Host Controller | |
| [ 11.780382] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 | |
| [ 11.781514] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 | |
| [ 11.781562] tegra-xusb 70090000.usb: irq 323, io mem 0x70090000 | |
| [ 11.782182] hub 1-0:1.0: USB hub found | |
| [ 11.782217] hub 1-0:1.0: 5 ports detected | |
| [ 11.782732] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.783485] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.783970] tegra-xusb 70090000.usb: xHCI Host Controller | |
| [ 11.783985] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 | |
| [ 11.784065] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 11.784747] hub 2-0:1.0: USB hub found | |
| [ 11.784784] hub 2-0:1.0: 4 ports detected | |
| [ 11.785240] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.785818] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.792880] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 11.838834] max77620-thermal max77620-thermal: Failed to register thermal zone: -19 | |
| [ 11.918714] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 12.142354] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb | |
| [ 12.149969] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when cpu reaches 102500 mC | |
| [ 12.149979] tegra_soctherm 700e2000.thermal-sensor: throttrip: will throttle when cpu reaches 98500 mC | |
| [ 12.150071] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when gpu reaches 103000 mC | |
| [ 12.150079] tegra_soctherm 700e2000.thermal-sensor: throttrip: will throttle when gpu reaches 100000 mC | |
| [ 12.150185] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when pll reaches 103000 mC | |
| [ 12.150190] tegra_soctherm 700e2000.thermal-sensor: throttrip: pll: missing hot temperature | |
| [ 12.150256] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when mem reaches 103000 mC | |
| [ 12.150261] tegra_soctherm 700e2000.thermal-sensor: throttrip: mem: missing hot temperature | |
| [ 12.150463] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 12.163955] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 13.165723] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 13.169863] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 13.173960] tegra-i2c 7000c700.i2c: could not find pctldev for node /host1x@50000000/dpaux@54040000/pinmux-i2c, deferring probe | |
| [ 13.174886] tegra-dpaux 54040000.dpaux: 54040000.dpaux supply vdd not found, using dummy regulator | |
| [ 13.200720] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 13.200723] [drm] No driver support for vblank timestamp query. | |
| [ 13.200824] [drm] Cannot find any crtc or sizes - going 1024x768 | |
| [ 13.898404] usbcore: registered new interface driver r8152 | |
| [ 13.941979] usbcore: registered new interface driver cdc_ether | |
| [ 13.974268] Console: switching to colour frame buffer device 128x48 | |
| [ 13.996771] lp855x 0-002c: failed to read 0x00 | |
| [ 13.996779] lp855x 0-002c: pre init device err: -121 | |
| [ 13.996785] lp855x 0-002c: device config err: -121 | |
| [ 13.996886] lp855x: probe of 0-002c failed with error -121 | |
| [ 14.021570] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xusb | |
| [ 14.067294] drm drm: fb0: frame buffer device | |
| [ 14.096696] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 | |
| [ 14.513984] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [ 14.652161] r8152 2-1:1.0 eth0: v1.08.9 | |
| [ 14.749796] kauditd_printk_skb: 138 callbacks suppressed | |
| [ 14.760359] audit: type=1130 audit(1501303848.545:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 14.827681] audit: type=1130 audit(1501303848.623:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 14.951735] audit: type=1130 audit(1501303848.747:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 15.098168] audit: type=1130 audit(1501303848.894:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rogue comm="systemd" exe="/nix/store/q12wiwvj0z2wblw3nm77gc1zayaiy6nr-systemd-233/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| [ 15.175473] audit: type=1305 audit(1501303848.971:66): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 | |
| [ 16.104816] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 18.498168] r8152 2-1:1.0 eth0: carrier on | |
| [ 18.504979] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| <<< Welcome to NixOS 17.09pre-git (aarch64) - ttyS0 >>> | |
| The "root" account has an empty password. | |
| Press <Alt-F8> for the NixOS manual. | |
| nixos login: root (automatic login) | |
| [root@nixos:~]# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment